Convert ShouldBeErrorId to Should -Throw -ErrorId in PowerShell tests.
Get rid of try { } catch { } formula to assert that errors were thrown.
Small fixes in tests to obey the new Pester -Parameter syntax.
This regression was introduced by #6523, in `PSModuleInfo.cs`. A circular nested module check was removed because the comment there suggested it happens only with a deprecated workflow module. This causes a `StackOverflow` exception when running into circular nested modules.
Circular nested modules could happen for a module that is not well structured. For example, the module folder `test` contains two files: `test.psd1` and `test.psm1`, and `test.psd1` has the following content:
@{ ModuleVersion = '0.0.1'; RootModule = 'test'; NestedModules = @('test') }
The same value `test` is put in both RootModule and NestedModule, which will end up with a module whose nested module points to itself.
There are two changes in this PR:
1. Add back the check for circular nested modules in `PSModuleInfo.cs`.
2. Remove a wrong `Dbg.Assert` in `ModuleCmdletBase.cs` and two checks before it.
- For the assertion `Dbg.Assert(newManifestInfo.SessionState == ss`, when facing the example above, the nested module will first be loaded with a different session state, and then when trying to load the root module, the same loaded nested module will be reused for it. So 'newManifestInfo.SessionState' is not `ss`. The assertion will fail in that case.
- For the two checks before the assertion, they are not needed anymore based on the comments there.
Create the default PSSession configuration, not tied to a specific PowerShell version.
When Enable-PSRemoting command is run, it creates 2 sessions configurations:
first, the same as it was before with the name containing the current version expressed as: 'PowerShell.$PSVersionTable.GitCommitId'
second with the default name 'PowerShell.6' so that administrators wouldn't have to guess which specific version is installed on the target.
PR addresses the issue: #6470
Clean up workflow logic in the module loading component.
Workflow module is not supported in PSCore.
Currently, Import-Module throws a terminating error when seeing .xaml modules. After the change, Import-Module throws a non-terminating error when seeing .xaml modules.
Based on standard practices, we need to have a copyright and license notice at the top of each source file. Removed existing copyrights and updated/added copyright notices for .h, .cpp, .cs, .ps1, and .psm1 files.
Updated module manifests for consistency to have Author = "PowerShell" and Company = "Microsoft Corporation". Removed multiple line breaks.
Separate PR coming to update contribution document for new source files: #6140
Manually reviewed each change.
Fix#6073
* Test fixes and changes needed to support Pester 4.0.8
* Replace 'Should Contain' with new 'Should FileContentMatch' assertion
Explicitly check for string creation with write-output
* Use the current version of pester and install it in modulesDir
* Simplify logic for relative path test.
Multiple '..' is not needed for a relative path, a single one will do. Also, on multi-drive systems using split-path -noqualifier will probably do the wrong thing with regard to constructing a correct path.
Remove extraneous Should Not Throw test, if this throws, the test will fail, we don't need to explicitly assert the not throw
* In some environments it is possible that computer name is 'localhost', so that should be allowed
* [feature] Add link for migrating tests from Pester v3 to v4
Fix up capitalization and white space issues
Change one test to check FullyQualifiedErrorId rather than just `Should Throw`
* [feature] update invoke-item test to handle the case where multiple notepad processes are running
* Fix spelling issue with Pester 4x, calling it Pester 4 should be sufficient
This unifies file encoding across the inbox cmdlets to be UTF-8 without a BOM for all platforms. This is a breaking change as cmdlets on windows have a number of different encodings. This supports better interoperability with tradition Linux shells as we are using the same encoding.
Validate that files are created with UTF-8 encoding without BOM
Update tests to validate Encoding parameter to new type and create new tests for
parameter type validation.
[Breaking Change] The '-Encoding Byte' has been removed from the filesystem provider cmdlets. A new parameter '-AsByteStream' is now added to indicate that a byte stream is required as input, or output will be a stream of bytes.
- Rename powershell.exe to pwsh.exe
- Fixe appveyor.psm1
- Update MSI to include 'pwsh' in path and app paths
- Revert change for hyper-v powershell direct
- Update names in packaging.psm1.
- Fix check for SxS
The code in `AssemblyLoadContext.dll` doesn't need to be in a separate DLL anymore.
S.M.A.dll depends on `AssemblyLoadContext.dll`, so keeping that code out of S.M.A.dll doesn't help make S.M.A smaller size or less dependent. So the code in `AssemblyLoadContext.dll` is moved to `S.M.A.dll` and then we remove `AssemblyLoadContext.dll`.
The changes are:
- Move `CorePsAssemblyLoadContext.cs` to `src\S.M.A\CoreCLR\`
- Update `CorePsAssemblyLoadContext.cs` to get the test took moved to `Utils.InternalTestHooks` and update tests
- Update `build.psm1` and `.csproj` accrodingly
- Update `pwrshcommon.cpp` to remove `AssemblyLoadContext.dll` from the TPA list.
- `S.M.A.AssemblyExtensions` is removed as `PackageManagement` has finished their move to .NET Core 2.0. (I will work with Bryan to get the latest version uploaded to powershell-core)
It's to solve a side-by-side problem we have with powershell core. If a .NET Core version assembly has the same name as it's .NET ancestor in GAC, then even if you specify the file path to `Import-Module`, powershell core will still load the one in GAC because it tries 'Assembly.Load' first.
Now we change it to use `Assembly.LoadFrom` first when a file path is given, so it works for modules that have side-by-side assemblies.
- Add tests for remote import-module
- Fix issue with remotely importing module where it was checking the version filter incorrectly against the proxy module
- The filters are applied when importing the module remotely
- After proxy module is generated it always has a module version of 1.0, so the filters will always fail when importing the proxy locally
* Updated default ModuleVersion in ModuleManifest to 0.0.1
* updates tests where manifests default versions where still matched agianst the old 1.0 version
Fixes#1193 for most scenarios. The remaining scenario to be addressed is the Nano Server bring-up scenario. To continue supporting that scenario, I left the Install-PowerShellRemoting script in place.
This change
1. Ports Enable-PSRemoting and Disable-PSRemoting to PowerShell Core
2. Adds side-by-side PowerShell Core remoting support to the PSSessionConfiguration cmdlets and PSRemoting cmdlets.
3. Ports PSSessionConfiguration tests
This change also introduces a behavioral difference. The PSRemoting and PSSessionConfiguration cmdlets are now context-sensitive and only work for endpoints that match the PowerShell type. For example, Get-PSSessionConfiguration, when running in PowerShell Core, will only return PowerShell Core WinRM endpoints. It will only modify PowerShell Core WinRM endpoints and cannot be used to configure Windows PowerShell endpoints.
- Fix PSScriptAnalyzer warnings of type PSAvoidUsingCmdletAliases for 'ForEach-Object' (alias is '%' or 'foreach')
- Fix PSScriptAnalyzer warnings of type PSAvoidUsingCmdletAliases for 'Where-Object' (alias is '?' or 'where')
- Fix PSScriptAnalyzer warnings of type PSAvoidUsingCmdletAliases for 'Select-Object' (alias is 'select')
- Fix PSScriptAnalyzer warnings of type PSPossibleIncorrectComparisonWithNull. Essentially, $null has to be on the left-hand side when using it for comparison.
- A Test in ParameterBinding.Tests.ps1 needed adapting as this test used to rely on the wrong null comparison
- Replace a subset of tests of kind '($object -eq $null) | Should Be $true' with '$object | Should Be $null'
This change is only for Windows and appends the Windows PowerShell PSModulePath on startup via a default profile. Depending on the data/feedback we get, we can decide what to do (opt-in vs opt-out) as we get closer to a release candidate.
Implements support for backgrounding pipelines with &. Putting & at the end of a pipeline will cause the pipeline
to be run as a PowerShell job. When a pipeline is backgrounded a job object is returned. Once the pipeline is
running as a job, all of the normal job cmdlets can be used to manage the job. Variables (ignoring process-specific
variables) used in the pipeline are automatically copied to the job so
copy $foo $bar &
just works. The job is also run in the current directory instead of the user's home directory as is the case with Start-Job.Implement
* Add autoload for TestHelpers.psm1
Test.Helpers.psm1 was renamed to TestHelpers.psm1
* Resolve conflit and rebase Add autoload for TestLanguage.psm1
* Remove unneeded comments from PSD1 files
* Rename test modules
Remove approved verbs (Get-Verb) from module names.
* Enhance ShouldBeErrorId to output exception into pipeline for later analysis
* Remove unneeded comments
* Resolve merge conflict
Related #3238
1. Add autoload for test modules
2. Move TestHostCS.psm1 to 'test\tools\Modules\' folder
3. Remove explicit load TestHostCS.psm1 from test files
* Fix GetType() bad pattern and related issues in tests
$var.GetType() can raise an exception in tests so we should check $var
before make the call. A large part of the tests does not make this
check.
I start with searching ".GetType()" but discovered many related issues
in tests (reduntant and unneeded tests, "throw" bad pattens, bugs,
formattings (sorry!) and so on) - I had to fix them too.
* Fix after code review
* Second wave of migration GetType() -> BeOfType
Removed 'GetType().Name' patterns.
* Improve console cmdlets tests
Main improvements refer to tests of the Write-Host cmdlet.
Original tests:
1. Slow because run external processes
2. Don't test colors and -NoNewLine in fact.
1. The original tests is preserved (deleted one as redundant) but marked
by 'Slow' tag. They is preserved because they actually check the output
on the work, not a test console.
2. Add negative color tests. (Code cover grow!)
3. Add tests based on TestHostCS. This test host has been refined so we
can see colors and a new line in output.
4. Add minor fixes for test modules loads.
Also I add support for Information stream. I originally planned to use
it but not actually used. However, I have left this as a useful addition
for future tests.
I wonder that a Write-Host console output is duplicated in Information
Stream - Is it by design? I left a debug print on this matter in the
test code.
* Fix after code review
* Corrections after code review
Suppress import-module warnings
Rename Describes
Add "-Object" test
Add Stream.Information tests with TestHostCS
* Add checks for Streams.Information and add comments
set executable bit on Linux/MacOS as that's what determines whether something
is executable. Also simplify partial path creation, only remove up to the first
colon, so those filesystems which have a single root are treated properly
Klaudia Algiz