There a some differences in support of named pipes for Windows and non-Windows. Named pipes on Unix have a 104 character path limit. On macOS, the `$env:TMPDIR` (on my system) is already 49 characters; corefx adds 12 more. Since AppDomainName isn't really used, changed it from `DefaultAppDomain` to `None` to shorten the name. Need to keep it since Windows PowerShell expects it. Changed `starttime` part of pipe name to 8 hex characters which is to provide uniqueness to the pipe name.
[Breaking Change]
When a binary module has the module assembly in GAC, we load the assembly from GAC before trying to load it from module base path.
This change attempts to load it from module base path before looking up in GAC.
* Remove regions in HistoryInfo class
* Auto properties refactoring in HistoryInfo
* Adding Duration property to HistoryInfo
* Rename ExecutionTime => Duration
- Add VSTS CI for Windows
- Disable `Access-denied test for Get-Item C:\windows\appcompat\Programs\Install -ErrorAction Stop`, because the path does not always exist
- https://github.com/PowerShell/PowerShell/issues/7553
- Disable `Should give .sys file if the fullpath is specified with hidden and force parameter`, because pagefile.sys doesn't always exist and other files don't meet test's requirement.
- https://github.com/PowerShell/PowerShell/issues/7554
- Disable some `Test-Connection` tests for same reasons they failed on VSTS Linux
- https://github.com/PowerShell/PowerShell/issues/7555
- Disable `Test-FileCatalog should pass when catalog is in the same folder as files being tested`, because the CmdLet does not work in that scenario
- Also, give details needed to investigate when the test fails
- https://github.com/PowerShell/PowerShell/issues/7556
- Update `appveyor.psm1` to work with VSTS
- Update `HelpersRemoting.psm1` `New-RemoteSession` to work for CimSession (discovered an issue during the investigation)
- Update `Test wildcard with drive relative directory path` to work when there are multiple drives
- Disable on non-windows machines since the test is assuming drive letters
- Update `New-CimSession` Tests to requireAdmin
- Also, make sure session name is a string
- Add functions to save and restore psoptions
- update `.gitatttributes` so files clone like they do on appveyor
The intent was to have the version of the PSSessionConfiguration name not include the `v` for the version string. Also, Preview releases should standardize on `PowerShell.6-Preview` instead of clobbering `PowerShell.6` so that stable and preview can co-exist side-by-side.
Need to verify on Win10 IoT if `Install-PowerShellRemoting.ps1` is still needed anymore as it may be possible to run `pwsh -c enable-psremoting` from within Windows PowerShell Core removing the need for that script which duplicates `Enable-PSRemoting` capability.
Update: Not able to get the current master build working on Win10 IoT, getting `Invalid access to memory` error. Will have to investigate this separately from this PR and keep `Install-PowerShellRemoting.ps1` for now.
Fix https://github.com/PowerShell/PowerShell/issues/7119
- Add `%WINDIR%\System32\WindowsPowerShell\v1.0\Modules` (Windows PowerShell $PSHOME) to the end of the default PSCore 6 module path (i.e. the module path as initially set at startup).
- Cause an error to be thrown by `Import-Module` when a module with `CompatiblePSEditions` not containing `"Core"` is being loaded from the 'System32' module path.
- Suppress output of modules listed by `Get-Module -ListAvailable` from Windows PowerShell $PSHOME when `CompatiblePSEditions` does not contain `"Core"`.
- Introduce the `-SkipCompatibilityCheck` switch parameter on both `Import-Module` and `Get-Module` to respectively allow importing incompatible modules and listing incompatible modules.
- Adds a `PSEdition` column to the `PSModuleInfo` table view format.
- Ensures that completions are not given for incompatible modules on the System32 module path.
* The major refactoring changes are:
- In `ModuleIntrisic.cs`, remove unneeded Windows-PowerShell-only code.
- In `ModuleUtils.cs`
- use the new API `Directory.GetDirectories(string path, string searchPattern, EnumerationOptions enumerationOptions)` and `Directory.GetFiles(string path, string searchPattern, EnumerationOptions enumerationOptions)` to enumerate files and sub-directories within a directory path.
- remove the unused parameter `bool force` from `GetDefaultAvailableModuleFiles(bool force, bool isForAutoDiscovery, ExecutionContext context)`
- refactor the method `GetModuleVersionsFromAbsolutePath`. Add more comments and rename the method name.
- In `ModuleCmdletBase.cs`, refactor the method `GetModuleForNonRootedPaths` to `GetModuleForNames` to simply its implementation.
- In `PSModuleInfo.cs`
- group the declarations of `Declared*Exports` fields together
- rename `_detected*Exports` fields to `Detected*Exports` to group them together. They are internal fields and used outside `PSModuleInfo`.
* There is some perf improvement after this refactoring change:
- For `Get-Module -ListAvailable`, there is about 36% speed improvement for 94 default modules.
- For `Get-Module -ListAvailable -All`, there is about 14% speed improvement for totally 600 module files.
- For `Get-Module <name> -ListAvailable -List`, there is over 17x speed improvement for finding 13 modules from 600 modules. This is because we now filter names using the module file before creating a `PSMdouleInfo` object.
Dynamic (DLR) objects work in some places today, but not others. This change expands that support to ForEach-Object, Where-Object and the family of cmdlets that use 'MshExpression' (Select-Object, etc.).
This change addresses both wildcard and non-wildcard cases. In wildcard cases, it uses the existing support of generating PSDynamicMember objects for names returned by GetDynamicMemberNames.
In non-wildcard cases, a dynamic property access is attempted whether or not the name shows up in GetDynamicMemberNames, but a truly "blind" access is only attempted if we see that the base object is an IDMOP. If the dynamic access fails, you'll get the same or a similar error experience as before ("The property 'Blarg' cannot be found", or no error at all, depending on the cmdlet and the strict mode setting).
The included test coverage includes a stub for the.ForEach operator--once people are happy with this change, I can continue by adding support there.
This change should allegedly also have positive perf impact, though in actual perf testing, although it does seem ever-so-slightly faster, I found it difficult to measure much difference at all.
Convert ShouldBeErrorId to Should -Throw -ErrorId in PowerShell tests.
Get rid of try { } catch { } formula to assert that errors were thrown.
Small fixes in tests to obey the new Pester -Parameter syntax.
This regression was introduced by #6523, in `PSModuleInfo.cs`. A circular nested module check was removed because the comment there suggested it happens only with a deprecated workflow module. This causes a `StackOverflow` exception when running into circular nested modules.
Circular nested modules could happen for a module that is not well structured. For example, the module folder `test` contains two files: `test.psd1` and `test.psm1`, and `test.psd1` has the following content:
@{ ModuleVersion = '0.0.1'; RootModule = 'test'; NestedModules = @('test') }
The same value `test` is put in both RootModule and NestedModule, which will end up with a module whose nested module points to itself.
There are two changes in this PR:
1. Add back the check for circular nested modules in `PSModuleInfo.cs`.
2. Remove a wrong `Dbg.Assert` in `ModuleCmdletBase.cs` and two checks before it.
- For the assertion `Dbg.Assert(newManifestInfo.SessionState == ss`, when facing the example above, the nested module will first be loaded with a different session state, and then when trying to load the root module, the same loaded nested module will be reused for it. So 'newManifestInfo.SessionState' is not `ss`. The assertion will fail in that case.
- For the two checks before the assertion, they are not needed anymore based on the comments there.
Create the default PSSession configuration, not tied to a specific PowerShell version.
When Enable-PSRemoting command is run, it creates 2 sessions configurations:
first, the same as it was before with the name containing the current version expressed as: 'PowerShell.$PSVersionTable.GitCommitId'
second with the default name 'PowerShell.6' so that administrators wouldn't have to guess which specific version is installed on the target.
PR addresses the issue: #6470
Clean up workflow logic in the module loading component.
Workflow module is not supported in PSCore.
Currently, Import-Module throws a terminating error when seeing .xaml modules. After the change, Import-Module throws a non-terminating error when seeing .xaml modules.
Based on standard practices, we need to have a copyright and license notice at the top of each source file. Removed existing copyrights and updated/added copyright notices for .h, .cpp, .cs, .ps1, and .psm1 files.
Updated module manifests for consistency to have Author = "PowerShell" and Company = "Microsoft Corporation". Removed multiple line breaks.
Separate PR coming to update contribution document for new source files: #6140
Manually reviewed each change.
Fix#6073
* Test fixes and changes needed to support Pester 4.0.8
* Replace 'Should Contain' with new 'Should FileContentMatch' assertion
Explicitly check for string creation with write-output
* Use the current version of pester and install it in modulesDir
* Simplify logic for relative path test.
Multiple '..' is not needed for a relative path, a single one will do. Also, on multi-drive systems using split-path -noqualifier will probably do the wrong thing with regard to constructing a correct path.
Remove extraneous Should Not Throw test, if this throws, the test will fail, we don't need to explicitly assert the not throw
* In some environments it is possible that computer name is 'localhost', so that should be allowed
* [feature] Add link for migrating tests from Pester v3 to v4
Fix up capitalization and white space issues
Change one test to check FullyQualifiedErrorId rather than just `Should Throw`
* [feature] update invoke-item test to handle the case where multiple notepad processes are running
* Fix spelling issue with Pester 4x, calling it Pester 4 should be sufficient
This unifies file encoding across the inbox cmdlets to be UTF-8 without a BOM for all platforms. This is a breaking change as cmdlets on windows have a number of different encodings. This supports better interoperability with tradition Linux shells as we are using the same encoding.
Validate that files are created with UTF-8 encoding without BOM
Update tests to validate Encoding parameter to new type and create new tests for
parameter type validation.
[Breaking Change] The '-Encoding Byte' has been removed from the filesystem provider cmdlets. A new parameter '-AsByteStream' is now added to indicate that a byte stream is required as input, or output will be a stream of bytes.
- Rename powershell.exe to pwsh.exe
- Fixe appveyor.psm1
- Update MSI to include 'pwsh' in path and app paths
- Revert change for hyper-v powershell direct
- Update names in packaging.psm1.
- Fix check for SxS
The code in `AssemblyLoadContext.dll` doesn't need to be in a separate DLL anymore.
S.M.A.dll depends on `AssemblyLoadContext.dll`, so keeping that code out of S.M.A.dll doesn't help make S.M.A smaller size or less dependent. So the code in `AssemblyLoadContext.dll` is moved to `S.M.A.dll` and then we remove `AssemblyLoadContext.dll`.
The changes are:
- Move `CorePsAssemblyLoadContext.cs` to `src\S.M.A\CoreCLR\`
- Update `CorePsAssemblyLoadContext.cs` to get the test took moved to `Utils.InternalTestHooks` and update tests
- Update `build.psm1` and `.csproj` accrodingly
- Update `pwrshcommon.cpp` to remove `AssemblyLoadContext.dll` from the TPA list.
- `S.M.A.AssemblyExtensions` is removed as `PackageManagement` has finished their move to .NET Core 2.0. (I will work with Bryan to get the latest version uploaded to powershell-core)
It's to solve a side-by-side problem we have with powershell core. If a .NET Core version assembly has the same name as it's .NET ancestor in GAC, then even if you specify the file path to `Import-Module`, powershell core will still load the one in GAC because it tries 'Assembly.Load' first.
Now we change it to use `Assembly.LoadFrom` first when a file path is given, so it works for modules that have side-by-side assemblies.
- Add tests for remote import-module
- Fix issue with remotely importing module where it was checking the version filter incorrectly against the proxy module
- The filters are applied when importing the module remotely
- After proxy module is generated it always has a module version of 1.0, so the filters will always fail when importing the proxy locally
* Updated default ModuleVersion in ModuleManifest to 0.0.1
* updates tests where manifests default versions where still matched agianst the old 1.0 version
Fixes#1193 for most scenarios. The remaining scenario to be addressed is the Nano Server bring-up scenario. To continue supporting that scenario, I left the Install-PowerShellRemoting script in place.
This change
1. Ports Enable-PSRemoting and Disable-PSRemoting to PowerShell Core
2. Adds side-by-side PowerShell Core remoting support to the PSSessionConfiguration cmdlets and PSRemoting cmdlets.
3. Ports PSSessionConfiguration tests
This change also introduces a behavioral difference. The PSRemoting and PSSessionConfiguration cmdlets are now context-sensitive and only work for endpoints that match the PowerShell type. For example, Get-PSSessionConfiguration, when running in PowerShell Core, will only return PowerShell Core WinRM endpoints. It will only modify PowerShell Core WinRM endpoints and cannot be used to configure Windows PowerShell endpoints.
- Fix PSScriptAnalyzer warnings of type PSAvoidUsingCmdletAliases for 'ForEach-Object' (alias is '%' or 'foreach')
- Fix PSScriptAnalyzer warnings of type PSAvoidUsingCmdletAliases for 'Where-Object' (alias is '?' or 'where')
- Fix PSScriptAnalyzer warnings of type PSAvoidUsingCmdletAliases for 'Select-Object' (alias is 'select')
- Fix PSScriptAnalyzer warnings of type PSPossibleIncorrectComparisonWithNull. Essentially, $null has to be on the left-hand side when using it for comparison.
- A Test in ParameterBinding.Tests.ps1 needed adapting as this test used to rely on the wrong null comparison
- Replace a subset of tests of kind '($object -eq $null) | Should Be $true' with '$object | Should Be $null'
This change is only for Windows and appends the Windows PowerShell PSModulePath on startup via a default profile. Depending on the data/feedback we get, we can decide what to do (opt-in vs opt-out) as we get closer to a release candidate.
Aditya Patwardhan