admin/intel-linux-sgx
1
0
Fork 0
mirror of https://github.com/intel/linux-sgx synced 2026-06-08 14:49:32 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
033054af3999a87f2be8848c0df068d43de9df39
intel-linux-sgx/SampleCode/SampleEnclave/Makefile
T
Li, Xun c505e6129a Linux 2.6 Open Source Gold Release 
Added support for Reproducible Enclave Build using Docker file.
Added support for Intel AVX-512 instructions and Intel SHA Extensions New Instructions (SHA-NI) in trusted libraries.
Support both EPID and ECDSA based quote for quoting related interfaces in sgx_uae_service library.
Updated key exchange library to support both EPID and ECDSA based remote attestation.
Support new interface to check platform information blob from remote attestation response message.
Fixed bugs.

Signed-off-by: Li, Xun <xun.li@intel.com>
2019-07-05 14:12:24 +08:00

270 lines
9.5 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2011-2019 Intel Corporation. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# * Neither the name of Intel Corporation nor the names of its
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
#
######## SGX SDK Settings ########
SGX_SDK ?= /opt/intel/sgxsdk
SGX_MODE ?= HW
SGX_ARCH ?= x64
SGX_DEBUG ?= 1
ifeq ($(shell getconf LONG_BIT), 32)
SGX_ARCH := x86
else ifeq ($(findstring -m32, $(CXXFLAGS)), -m32)
SGX_ARCH := x86
endif
ifeq ($(SGX_ARCH), x86)
SGX_COMMON_FLAGS := -m32
SGX_LIBRARY_PATH := $(SGX_SDK)/lib
SGX_ENCLAVE_SIGNER := $(SGX_SDK)/bin/x86/sgx_sign
SGX_EDGER8R := $(SGX_SDK)/bin/x86/sgx_edger8r
else
SGX_COMMON_FLAGS := -m64
SGX_LIBRARY_PATH := $(SGX_SDK)/lib64
SGX_ENCLAVE_SIGNER := $(SGX_SDK)/bin/x64/sgx_sign
SGX_EDGER8R := $(SGX_SDK)/bin/x64/sgx_edger8r
endif
ifeq ($(SGX_DEBUG), 1)
ifeq ($(SGX_PRERELEASE), 1)
$(error Cannot set SGX_DEBUG and SGX_PRERELEASE at the same time!!)
endif
endif
ifeq ($(SGX_DEBUG), 1)
SGX_COMMON_FLAGS += -O0 -g
else
SGX_COMMON_FLAGS += -O2
endif
SGX_COMMON_FLAGS += -Wall -Wextra -Winit-self -Wpointer-arith -Wreturn-type \
-Waddress -Wsequence-point -Wformat-security \
-Wmissing-include-dirs -Wfloat-equal -Wundef -Wshadow \
-Wcast-align -Wcast-qual -Wconversion -Wredundant-decls
SGX_COMMON_CFLAGS := $(SGX_COMMON_FLAGS) -Wjump-misses-init -Wstrict-prototypes -Wunsuffixed-float-constants
SGX_COMMON_CXXFLAGS := $(SGX_COMMON_FLAGS) -Wnon-virtual-dtor -std=c++11
######## App Settings ########
ifneq ($(SGX_MODE), HW)
Urts_Library_Name := sgx_urts_sim
else
Urts_Library_Name := sgx_urts
endif
App_Cpp_Files := App/App.cpp $(wildcard App/Edger8rSyntax/*.cpp) $(wildcard App/TrustedLibrary/*.cpp)
App_Include_Paths := -IInclude -IApp -I$(SGX_SDK)/include
App_C_Flags := -fPIC -Wno-attributes $(App_Include_Paths)
# Three configuration modes - Debug, prerelease, release
# Debug - Macro DEBUG enabled.
# Prerelease - Macro NDEBUG and EDEBUG enabled.
# Release - Macro NDEBUG enabled.
ifeq ($(SGX_DEBUG), 1)
App_C_Flags += -DDEBUG -UNDEBUG -UEDEBUG
else ifeq ($(SGX_PRERELEASE), 1)
App_C_Flags += -DNDEBUG -DEDEBUG -UDEBUG
else
App_C_Flags += -DNDEBUG -UEDEBUG -UDEBUG
endif
App_Cpp_Flags := $(App_C_Flags)
App_Link_Flags := -L$(SGX_LIBRARY_PATH) -l$(Urts_Library_Name) -lpthread
ifneq ($(SGX_MODE), HW)
App_Link_Flags += -lsgx_uae_service_sim
else
App_Link_Flags += -lsgx_uae_service
endif
App_Cpp_Objects := $(App_Cpp_Files:.cpp=.o)
App_Name := app
######## Enclave Settings ########
ifneq ($(SGX_MODE), HW)
Trts_Library_Name := sgx_trts_sim
Service_Library_Name := sgx_tservice_sim
else
Trts_Library_Name := sgx_trts
Service_Library_Name := sgx_tservice
endif
Crypto_Library_Name := sgx_tcrypto
Enclave_Cpp_Files := Enclave/Enclave.cpp $(wildcard Enclave/Edger8rSyntax/*.cpp) $(wildcard Enclave/TrustedLibrary/*.cpp)
Enclave_Include_Paths := -IInclude -IEnclave -I$(SGX_SDK)/include -I$(SGX_SDK)/include/tlibc -I$(SGX_SDK)/include/libcxx
Enclave_C_Flags := $(Enclave_Include_Paths) -nostdinc -fvisibility=hidden -fpie -ffunction-sections -fdata-sections
CC_BELOW_4_9 := $(shell expr "`$(CC) -dumpversion`" \< "4.9")
ifeq ($(CC_BELOW_4_9), 1)
Enclave_C_Flags += -fstack-protector
else
Enclave_C_Flags += -fstack-protector-strong
endif
Enclave_Cpp_Flags := $(Enclave_C_Flags) -nostdinc++
# Enable the security flags
Enclave_Security_Link_Flags := -Wl,-z,relro,-z,now,-z,noexecstack
# To generate a proper enclave, it is recommended to follow below guideline to link the trusted libraries:
# 1. Link sgx_trts with the `--whole-archive' and `--no-whole-archive' options,
# so that the whole content of trts is included in the enclave.
# 2. For other libraries, you just need to pull the required symbols.
# Use `--start-group' and `--end-group' to link these libraries.
# Do NOT move the libraries linked with `--start-group' and `--end-group' within `--whole-archive' and `--no-whole-archive' options.
# Otherwise, you may get some undesirable errors.
Enclave_Link_Flags := $(Enclave_Security_Link_Flags) \
-Wl,--no-undefined -nostdlib -nodefaultlibs -nostartfiles -L$(SGX_LIBRARY_PATH) \
-Wl,--whole-archive -l$(Trts_Library_Name) -Wl,--no-whole-archive \
-Wl,--start-group -lsgx_tstdc -lsgx_tcxx -l$(Crypto_Library_Name) -l$(Service_Library_Name) -Wl,--end-group \
-Wl,-Bstatic -Wl,-Bsymbolic -Wl,--no-undefined \
-Wl,-pie,-eenclave_entry -Wl,--export-dynamic \
-Wl,--defsym,__ImageBase=0 -Wl,--gc-sections \
-Wl,--version-script=Enclave/Enclave.lds
Enclave_Cpp_Objects := $(sort $(Enclave_Cpp_Files:.cpp=.o))
Enclave_Name := enclave.so
Signed_Enclave_Name := enclave.signed.so
Enclave_Config_File := Enclave/Enclave.config.xml
ifeq ($(SGX_MODE), HW)
ifeq ($(SGX_DEBUG), 1)
Build_Mode = HW_DEBUG
else ifeq ($(SGX_PRERELEASE), 1)
Build_Mode = HW_PRERELEASE
else
Build_Mode = HW_RELEASE
endif
else
ifeq ($(SGX_DEBUG), 1)
Build_Mode = SIM_DEBUG
else ifeq ($(SGX_PRERELEASE), 1)
Build_Mode = SIM_PRERELEASE
else
Build_Mode = SIM_RELEASE
endif
endif
.PHONY: all target run
all: .config_$(Build_Mode)_$(SGX_ARCH)
@$(MAKE) target
ifeq ($(Build_Mode), HW_RELEASE)
target: $(App_Name) $(Enclave_Name)
@echo "The project has been built in release hardware mode."
@echo "Please sign the $(Enclave_Name) first with your signing key before you run the $(App_Name) to launch and access the enclave."
@echo "To sign the enclave use the command:"
@echo " $(SGX_ENCLAVE_SIGNER) sign -key <your key> -enclave $(Enclave_Name) -out <$(Signed_Enclave_Name)> -config $(Enclave_Config_File)"
@echo "You can also sign the enclave using an external signing tool."
@echo "To build the project in simulation mode set SGX_MODE=SIM. To build the project in prerelease mode set SGX_PRERELEASE=1 and SGX_MODE=HW."
else
target: $(App_Name) $(Signed_Enclave_Name)
ifeq ($(Build_Mode), HW_DEBUG)
@echo "The project has been built in debug hardware mode."
else ifeq ($(Build_Mode), SIM_DEBUG)
@echo "The project has been built in debug simulation mode."
else ifeq ($(Build_Mode), HW_PRERELEASE)
@echo "The project has been built in pre-release hardware mode."
else ifeq ($(Build_Mode), SIM_PRERELEASE)
@echo "The project has been built in pre-release simulation mode."
else
@echo "The project has been built in release simulation mode."
endif
endif
run: all
ifneq ($(Build_Mode), HW_RELEASE)
@$(CURDIR)/$(App_Name)
@echo "RUN => $(App_Name) [$(SGX_MODE)|$(SGX_ARCH), OK]"
endif
.config_$(Build_Mode)_$(SGX_ARCH):
@rm -f .config_* $(App_Name) $(Enclave_Name) $(Signed_Enclave_Name) $(App_Cpp_Objects) App/Enclave_u.* $(Enclave_Cpp_Objects) Enclave/Enclave_t.*
@touch .config_$(Build_Mode)_$(SGX_ARCH)
######## App Objects ########
App/Enclave_u.h: $(SGX_EDGER8R) Enclave/Enclave.edl
@cd App && $(SGX_EDGER8R) --untrusted ../Enclave/Enclave.edl --search-path ../Enclave --search-path $(SGX_SDK)/include
@echo "GEN => $@"
App/Enclave_u.c: App/Enclave_u.h
App/Enclave_u.o: App/Enclave_u.c
@$(CC) $(SGX_COMMON_CFLAGS) $(App_C_Flags) -c $< -o $@
@echo "CC <= $<"
App/%.o: App/%.cpp App/Enclave_u.h
@$(CXX) $(SGX_COMMON_CXXFLAGS) $(App_Cpp_Flags) -c $< -o $@
@echo "CXX <= $<"
$(App_Name): App/Enclave_u.o $(App_Cpp_Objects)
@$(CXX) $^ -o $@ $(App_Link_Flags)
@echo "LINK => $@"
######## Enclave Objects ########
Enclave/Enclave_t.h: $(SGX_EDGER8R) Enclave/Enclave.edl
@cd Enclave && $(SGX_EDGER8R) --trusted ../Enclave/Enclave.edl --search-path ../Enclave --search-path $(SGX_SDK)/include
@echo "GEN => $@"
Enclave/Enclave_t.c: Enclave/Enclave_t.h
Enclave/Enclave_t.o: Enclave/Enclave_t.c
@$(CC) $(SGX_COMMON_CFLAGS) $(Enclave_C_Flags) -c $< -o $@
@echo "CC <= $<"
Enclave/%.o: Enclave/%.cpp Enclave/Enclave_t.h
@$(CXX) $(SGX_COMMON_CXXFLAGS) $(Enclave_Cpp_Flags) -c $< -o $@
@echo "CXX <= $<"
$(Enclave_Name): Enclave/Enclave_t.o $(Enclave_Cpp_Objects)
@$(CXX) $^ -o $@ $(Enclave_Link_Flags)
@echo "LINK => $@"
$(Signed_Enclave_Name): $(Enclave_Name)
@$(SGX_ENCLAVE_SIGNER) sign -key Enclave/Enclave_private.pem -enclave $(Enclave_Name) -out $@ -config $(Enclave_Config_File)
@echo "SIGN => $@"
.PHONY: clean
clean:
@rm -f .config_* $(App_Name) $(Enclave_Name) $(Signed_Enclave_Name) $(App_Cpp_Objects) App/Enclave_u.* $(Enclave_Cpp_Objects) Enclave/Enclave_t.*
Reference in New Issue View Git Blame Copy Permalink