Integer#&, #| and #^ read the right-hand operand with mrb_integer()
without checking its type. For a Float (or any non-Integer) this reads an
unrelated union field and returns a garbage value instead of raising, as
CRuby does. Raise TypeError via mrb_int_noconv() when the operand is not
an Integer. Bigint operands are still handled before this point, and the
shift operators keep coercing their width as before.
Co-authored-by: Claude <noreply@anthropic.com>
The if/unless nil? optimization called codegen() on the call node's
receiver, but a bare `nil?` is parsed as an FCALL whose receiver is
NULL. codegen(NULL) emits OP_LOADNIL, so the JMPNIL was testing the
literal nil instead of self, making `if nil?` always behave as
`if nil.nil?` (always true) and `unless nil?` always skip its body.
Load self when the receiver is implicit. Fixes#6874.
Co-authored-by: Claude <noreply@anthropic.com>
The test pushed mrb_int via vf.i but the format read int via %!d. On
x86_64/aarch64 the va_arg slots overlap so reading the low 32 bits of
the pushed int64 returned the right value, but on strict-alignment
ABIs (MIPS o32) va_arg(ap, int) reads the alignment padding and the
format prints 0 instead of the value.
Make the format match the helper: vf.i pairs with %!i (reads mrb_int),
matching the surrounding lines 44-50 convention and the "inspect
mrb_int" label.
Reported by vobloeb in #6857.
Co-authored-by: Claude <noreply@anthropic.com>
The optimization that skips `deconstruct` and the size check when the
case/in value is an array literal trusted node count, ignoring splat.
An element like `*a` expands at runtime, so [*a] was treated as length
1 and matched only patterns of that length.
Fixes#6854.
Co-authored-by: Claude <noreply@anthropic.com>
`a[range] = a` on a long-enough array tripped a heap-buffer-overflow
in value_move(). mrb_ary_splice's self-aset branch calls ary_dup(a)
to get an independent copy of the source elements, but ary_dup ->
ary_replace converts the source to shared as a copy-on-write
optimization when the length exceeds ARY_REPLACE_SHARED_MIN. After
that, a->as.heap.aux is reinterpreted as `shared` (the union member)
and ARY_CAPA(a) reads from the shared pointer's bits rather than
the real capacity. The expand-capa check below then silently mis-
sizes and value_move walks past the buffer.
Re-modify `a` immediately after ary_dup to un-share before the in-
place mutation. The buffer reads through `argv` (which now points
into the dup's storage) stay valid because ary_modify on a multi-
reference shared array allocates a fresh buffer for `a` and leaves
the original buffer owned by the dup.
Found via clusterfuzz mruby_fuzzer testcase 6525563811725312;
regression test covers a[3, 2] = a on a 31-element array (above
the ARY_REPLACE_SHARED_MIN=20 threshold).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
The p_value rule only accepted bare tSTRING tokens, which the lexer
emits for single-quoted strings. Double-quoted strings emit
tSTRING_BEG ... tSTRING (or with interpolation, tSTRING_BEG
string_rep tSTRING), so
case "hello"
in "hello"
:match
end
raised "syntax error, unexpected string literal" at the `"` after
`in`. Use the existing `string` non-terminal instead of bare
tSTRING, which also enables alternation (`"a" | "b"`), interpolation
(`"hel#{x}"`), and concatenation by juxtaposition in patterns.
close#6830
Co-authored-by: Claude <noreply@anthropic.com>
mrb_read_float's underflow short-circuit used `final_p < -342 - nd`,
which for nd > 1 can be below POW10_MIN (-343). That let
parse_decimal call prescale() with a final_p below POW10_MIN, causing
an out-of-bounds read of pow10_tab. Tighten the guard to
`final_p < POW10_MIN`; values below that threshold cannot be
represented as a non-zero double for any mantissa within the parser's
19-digit cap.
Reported by OSS-Fuzz (testcase 6097379597287424).
Co-authored-by: Claude <noreply@anthropic.com>
A copied Proc now always carries `MRB_PROC_ORPHAN`, so calling a
`dup`'d block that contains `break` or `return` raises
`LocalJumpError` even while the original yielding method is still on
the stack.
This is stricter than CRuby — which only marks the copy orphan once
the original yielding method returns — but matches mruby's
memory-first design: tracking the original via a back pointer in
RProc would also enlarge the GC mark set. dearblue's option (1) in
the linked issue, accepted for the simpler RProc layout.
Document the divergence in `doc/limitations.md` and add a regression
test in `test/t/proc.rb`.
close#6345
Co-authored-by: Claude <noreply@anthropic.com>
The peephole in gen_addsub() rewrote `q + -n` into OP_SUBI n (and
`q - -n` into OP_ADDI n) by negating n. For numeric receivers this is
equivalent, but for receivers overriding + or - the runtime fallback
dispatches the flipped method, losing the original operator. Restrict
the fold to non-negative immediates; negative falls through to the
normal OP_ADD/OP_SUB path with LOADI of the literal value.
close#2557
ref #2579
Co-authored-by: Claude <noreply@anthropic.com>
In CRuby the inherited method is invoked before Class.new yields to the
block.
An "already initialized error" exception is also removed since the
inherited method is now invoked before initialization and can set
instance variables on a class.
GC.step_limit caps the per-step work in incremental GC,
enabling more predictable pause times for real-time use.
GC.malloc_threshold triggers GC based on allocation bytes,
addressing memory pressure from large buffers.
Both default to 0 (disabled), preserving existing behavior.
Co-authored-by: Claude <noreply@anthropic.com>
attr_reader-generated getter methods silently ignored any arguments
passed to them. CRuby raises ArgumentError in this case.
Add mrb_get_args(mrb, "") to enforce zero arguments, matching CRuby.
case/in without else clause now raises NoMatchingPatternError
when no pattern matches, matching CRuby behavior. Fixes#6741.
Co-authored-by: Claude <noreply@anthropic.com>
Add key existence check using key?() before value access, so that
missing keys correctly fail to match (e.g. {b: 1} no longer matches
{a: nil} pattern). Implement **nil and empty {} exact match via
hash.size == num_keys check. Fix **rest to properly exclude matched
keys using dup + __delete instead of copying the entire hash.
Co-authored-by: Claude <noreply@anthropic.com>
Previously, the identity of the proc object was verified solely based on the identity of irep.
This patch makes the behavior consistent with CRuby.
The reason I noticed this issue was that when adding multiple proc objects with the same irep to a set object, only one was added.
```ruby
p Set.new(Array.new(3) { -> {} }).size
# => 3 (Ruby 4.0)
# => 1 (mruby without this patch)
```
If the block scope is the same, there is only one in CRuby as well.
However, in CRuby, the result of `Proc#to_s` is not affected by the block scope, so it has been changed to be based on the object's address.
The reason no test for `Proc#to_s` was added is that I couldn't determine whether it should be based on `Proc#hash` or the object's address.
```ruby
b = []
t = 3
while t > 0
b << -> {}
t -= 1
end
p Set.new(b).size
# => 1 (Ruby 4.0 and mruby)
p b[0].to_s == b[1].to_s
# => false (Ruby 4.0)
# => true (mruby without this patch)
```
Preparation for future grammar simplification that may
require parentheses for method calls with arguments on
the right-hand side of assignments.
Co-authored-by: Claude <noreply@anthropic.com>
add comprehensive tests for pattern matching features:
- basic case/in with literals and variables
- array patterns with rest and nested structures
- hash patterns with shorthand and rest
- guard clauses (if/unless)
- alternative patterns (|)
- pin operator (^)
- as pattern (=>)
- one-line pattern matching (in and =>)
- NoMatchingPatternError handling
Co-authored-by: Claude <noreply@anthropic.com>
Modify `Enumerable#hash` to use `__method_recursive?(:hash)` for recursion
detection, preventing infinite loops when hashing self-referencing enumerables.
Add a test case to verify the fix.
Co-authored-by: Gemini <gemini@google.com>
The technique is called "double dispatch" (that was popular in
Smalltalk), but it does not work well with mruby. It's slower and
consumes more memory. Even thought `#append_features` defined in ISO
standard (15.2.2.4.11), we decided to remove it. Strictly speaking, it
is mruby limitation. And it should be documented clearly.
There was a problem with visibility state from proc that straddles a fiber or is independent.
Therefore, it has been changed to give priority to env objects, if any.
Also, added "separate module" flag to block traversal to a higher level env object.
Note that the "separate module" flag is now set when calling blocks with the `mrb_yield_with_class()` function.
fixed https://github.com/mruby/mruby/issues/6494
Yukihiro "Matz" Matsumoto