Now `iv_get()` returns `pos+1` if it finds the entry, so you don't need
to call `iv_put()`. You can replace the entry value by assigning to
`t->ptr[pos-1]`.
This is a fundamentally simplified reimplementation of #5317
by @shuujii
Instead of having array of `struct iv_elem`, we have sequences of keys
and values packed in single chunk of malloc'ed memory. We don't have to
worry about gaps from alignment, especially on 64 bit architecture,
where `sizeof(struct iv_elem)` probably consumes 16 bytes, but
`sizeof(mrb_sym)+sizeof(mrb_value)` is 12 bytes.
In addition, this change could improve memory access locality.
close#5317
Make "N for M" into the form "given N, expected M".
As I worked, I noticed that the `argnum_error()` function had a part to include the method name in the message.
I think this part is no longer needed by https://github.com/mruby/mruby/pull/5394.
- Before this patch
```console
% bin/mruby -e '[1, 2, 3].each 0'
trace (most recent call last):
[1] -e:1
-e:1:in each: 'each': wrong number of arguments (1 for 0) (ArgumentError)
```
- After this patch
```console
% bin/mruby -e '[1, 2, 3].each 0'
trace (most recent call last):
[1] -e:1
-e:1:in each: wrong number of arguments (given 1, expected 0) (ArgumentError)
```
The `__id__` method implemented in the C function has `MRB_ARGS_NONE()` specified, but it is also effective in the following cases.
```ruby
p nil.__id__ opts: 1 rescue p :a
p nil.method(:__id__).call 1 rescue p :b
p nil.method(:__id__).call opts: 1 rescue p :c
p nil.method(:__id__).to_proc.call 1 rescue p :d
p nil.method(:__id__).to_proc.call opts: 1 rescue p :e
p nil.method(:__id__).unbind.bind_call nil, 1 rescue p :f
p nil.method(:__id__).unbind.bind_call nil, opts: 1 rescue p :g
p nil.__send__ :__id__, 1 rescue p :h
p nil.__send__ :__id__, opts: 1 rescue p :i
```
After applying this patch, all items will output symbols in the same way as CRuby.
For this purpose, add `MRB_PROC_NOARG` to `struct RProc::flags`.
If a splat argument was passed, it could write out of range on the VM stack.
```console
% bin/mruby -e 'def m(*args, **opts, &blk) p [args, opts, blk] end; m(*%w(X Y Z), r: 1, g: 2, b: 3) {}'
[["X", "Y", "Z"], {}, #<Proc:0x80077d7d0>]
```
The number of registers used is reduced.
Also, previously `R6` and` R7` were used, which exceeded the limit of `new_irep.nregs = 6`.
This could cause the VM stack to overrun.
The Difference
Since Ruby1.9, the keyword arguments were emulated by Ruby using the hash
object at the bottom of the arguments. But we have gradually moved toward
keyword arguments separated from normal (positinal) arguments.
At the same time, we value compatibility, so that Ruby3.0 keyword
arguments are somewhat compromise. Basically, keyword arguments are
separated from positional arguments, except when the method does not
take any formal keyword arguments, given keyword arguments (packed
in the hash object) are considered as the last argument.
And we also allow non symbol keys in the keyword arguments. In that
case, those keys are just passed in the `**` hash (or raise
`ArgumentError` for unknown keys).
The Instruction Changes
We have changed `OP_SEND` instruction. `OP_SEND` instruction used to
take 3 operands, the register, the symbol, the number of (positional)
arguments. The meaning of the third operand has been changed. It is now
considered as `n|(nk<<4)`, where `n` is the number of positional
arguments, and `nk` is the number of keyword arguments, both occupies
4 bits in the operand.
The number `15` in both `n` and `nk` means variable sized arguments are
packed in the object. Positional arguments will be packed in the array,
and keyword arguments will be packed in the hash object. That means
arguments more than 14 values are always packed in the object.
Arguments information for other instructions (`OP_SENDB` and `OP_SUPER`)
are also changed. It works as the third operand of `OP_SEND`. the
difference between `OP_SEND` and `OP_SENDB` is just trivial. It assigns
`nil` to the block hidden arguments (right after arguments).
The instruction `OP_SENDV` and `OP_SENDVB` are removed. Those
instructions are replaced by `OP_SEND` and `OP_SENDB` respectively with
the `15` (variable sized) argument information.
Calling Convention
When calling a method, the stack elements shall be in the order of the
receiver of the method, positional arguments, keyword arguments and the
block argument. If the number of positional or keyword arugument (`n` or
`nk`) is zero, corresponding arguments will be empty. So when `n=0` and
`nk=0` the stack layout (from bottom to top) will be:
+-----------------------+
| recv | block (or nil) |
+-----------------------+
The last elements `block` should be explicitly filled before `OP_SEND`
or assigned to `nil` by `OP_SENDB` internally. In other words, the
following have exactly same behavior:
OP_SENDB clears `block` implicitly:
```
OP_SENDB reg sym 0
```
OP_SEND clears `block` implicitly:
```
OP_LOADNIL R2
OP_SEND R2 sym 0
```
When calling a method with only positional arguments (n=0..14) without
keyword arguments, the stack layout will be like following:
+--------------------------------------------+
| recv | arg1 | ... | arg_n | block (or nil) |
+--------------------------------------------+
When calling a method with arguments packed in the array (n=15) which
means argument splat (*) is used in the actual arguments, or more than
14 arguments are passed the stack layout will be like following:
+-------------------------------+
| recv | array | block (or nil) |
+-------------------------------+
The number of the actual arguments is determined by the length of the
argument array.
When keyword arguments are given (nk>0), keyword arguments are passed
between positional arguments and the block argument. For example, when
we pass one positional argument `1` and one keyword argument `a: 2`,
the stack layout will be like:
+------------------------------------+
| recv | 1 | :a | 2 | block (or nil) |
+------------------------------------+
Note that keyword arguments consume `2*nk` elements in the stack when
`nk=0..14` (unpacked).
When calling a method with keyword arguments packed in the hash object
(nk=15) which means keyword argument splat (**) is used or more than
14 keyword arguments in the actual arguments, the stack layout will
be like:
+------------------------------+
| recv | hash | block (or nil) |
+------------------------------+
Note for mruby/c
When mruby/c authors try to support new keyword arguments, they need
to handle the new meaning of the argument information operand. If they
choose not to support keyword arguments in mruby/c, it just raise
error when `nk` (taken by `(c>>4)&0xf`) is not zero. And combine
`OP_SENDV` behavior with `OP_SEND` when `n` is `15`.
If they want to support keyword arguments seriously, contact me at
<matz@ruby.or.jp> or `@yukihiro_matz`. I can help you.
Existing call stack depth checks are unified into this check in
`cipush()`. The maximum depth is now specified by `MRB_CALL_LEVEL_MAX`
(the default is 512). The older `MRB_FUNCALL_DEPTH_MAX` is no longer
used.
Which represent `obj[int]` and `obj[int]=val` respectively where `obj`
is either `string`, `array` or `hash`, so that index access could be
faster. When `obj` is not assumed type or `R(a+1)` is not integer, the
instructions fallback to method calls.
It used to be compiled to the static string in the compiler. But the
encoding status actually depends on the runtime configuration. A new
method `Kernel#__ENCODING__` is introduced to implement the feature.
Yukihiro "Matz" Matsumoto