### Example
##### example.rb
```ruby
h = {}
(1..17).each{h[_1] = _1}
(1..16).each{h.delete(_1)}
h.rehash
```
##### ASAN report
```console
$ bin/mruby example.rb
==52587==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x602000006998 at pc 0x55a29cddf96b bp 0x7fff7b1b1720 sp 0x7fff7b1b1710
READ of size 4 at 0x602000006998 thread T0
#0 0x55a29cddf96a in ib_it_next /mruby/src/hash.c:639
#1 0x55a29cde2ca2 in ht_rehash /mruby/src/hash.c:900
#2 0x55a29cde379f in h_rehash /mruby/src/hash.c:996
#3 0x55a29cde7f3d in mrb_hash_rehash /mruby/src/hash.c:1735
#4 0x55a29ce77b62 in mrb_vm_exec /mruby/src/vm.c:1451
#5 0x55a29ce5fa88 in mrb_vm_run /mruby/src/vm.c:981
#6 0x55a29ceb87e1 in mrb_top_run /mruby/src/vm.c:2874
#7 0x55a29cf36bdf in mrb_load_exec mrbgems/mruby-compiler/core/parse.y:6805
#8 0x55a29cf36f25 in mrb_load_detect_file_cxt mrbgems/mruby-compiler/core/parse.y:6848
#9 0x55a29cdba0a2 in main /mruby/mrbgems/mruby-bin-mruby/tools/mruby/mruby.c:347
#10 0x7f24ef43b0b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2)
#11 0x55a29cdb4a6d in _start (/mruby/bin/mruby+0x2a3a6d)
0x602000006998 is located 0 bytes to the right of 8-byte region [0x602000006990,0x602000006998)
allocated by thread T0 here:
#0 0x7f24f01cfffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe)
#1 0x55a29ceb9440 in mrb_default_allocf /mruby/src/state.c:68
#2 0x55a29cdba747 in mrb_realloc_simple /mruby/src/gc.c:228
#3 0x55a29cdba928 in mrb_realloc /mruby/src/gc.c:242
#4 0x55a29cde12e5 in ht_init /mruby/src/hash.c:749
#5 0x55a29cde2b8e in ht_rehash /mruby/src/hash.c:897
#6 0x55a29cde379f in h_rehash /mruby/src/hash.c:996
#7 0x55a29cde7f3d in mrb_hash_rehash /mruby/src/hash.c:1735
#8 0x55a29ce77b62 in mrb_vm_exec /mruby/src/vm.c:1451
#9 0x55a29ce5fa88 in mrb_vm_run /mruby/src/vm.c:981
#10 0x55a29ceb87e1 in mrb_top_run /mruby/src/vm.c:2874
#11 0x55a29cf36bdf in mrb_load_exec mrbgems/mruby-compiler/core/parse.y:6805
#12 0x55a29cf36f25 in mrb_load_detect_file_cxt mrbgems/mruby-compiler/core/parse.y:6848
#13 0x55a29cdba0a2 in main /mruby/mrbgems/mruby-bin-mruby/tools/mruby/mruby.c:347
#14 0x7f24ef43b0b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2)
```
#### Before this patch:
```ruby
__send__ #=> wrong number of arguments
{}.default(1,2) #=> wrong number of arguments
```
#### After this patch:
```ruby
__send__ #=> wrong number of arguments (given 0, expected 1+)
{}.default(1,2) #=> wrong number of arguments (given 2, expected 0..1)
```
The accuracy is greatly improved by using the C preprocessor to scan C
sources for presym. C preprocessor can perfectly interpret all comments and
preprocessor directives, so it can detect all symbols defined, for example
`mrbgems/mruby-socket/src/const.cstub`.
Also, as described later, this change will greatly improve the accuracy of
presym detection from Ruby sources.
## Result
The number of lines in the `presym` file for all gems is as follows:
```console
Previous: 999 (false positive = 89, undetected = 297)
New: 1207
```
## Build process
The new build process (with presym) is as follows:
1. Build `mrbc` without presym (more on building without presym later).
2. Compile Ruby sources to C struct format with the `mrbc` created in
step 1, and create` mrblib.c` and `gem_init.c`. Note that the symbols
in the created files are output as `MRB_SYM` family macros or
`mrb_intern_lit` instead of IDs (details will be described later).
3. C preprocessor processes C sources including the created files of
step 2 and outputs them as `.i` files. In these files, for example,
`MRB_IVSYM(foo)` is converted to `<@! "@" "foo" !@>` and
`mrb_define_module(mrb, "Foo")` is converted to `<@! "Foo" !@>`.
4. Scan the files created in step 3 and create `presym` and` presym.inc`
files.
The files created in step 2 should output all static symbols defined in Ruby
sources, including local variables, so we can detect all presyms by just
scanning C sources without scanning Ruby sources directly.
Further, by this process, the files to be scanned becomes the same as the
files to be compiled, so that there is no excess or deficiency.
## Related changes
The following changes have been made in relation to realizing this feature.
### Allow build without presym
It enables build without presym to achieve the "Build process: 1". This
incorporates #5202, see its issue for details.
Note that when presym is enabled, even adding a local variable to a Ruby
source may change contents of presym and require recompilation of almost
all C sources. This is inconvenient, especially during trial and error in
development, but this feature is also useful because it does not cause
this problem if presym is disabled.
### Automatically create build target for `mrbc` without presym
The `mrbc` used in the "Build process: 1" will be built by automatically
creating a build target for it. The build name is `SOURCE_BUILD_NAME/mrbc`.
### Constantize output of C struct format by `mrbc`
To realizing the "Build process: 2", as mentioned above, symbol IDs are not
output directly in C struct format output by `mrbc`. As a result, the output
becomes constant regardless of the state of presym at the time of `mrbc`
build, and it is possible to detect symbols of Ruby sources in the same way
as other C sources.
Note that `mrb_intern_lit` is used for symbols that do not become presym,
but in this state, the corresponding element in the symbol array cannot be
statically initialized, so it is initialized at run time (therefore, in this
case, the `const` qualifier is not added to the symbol array).
### Specify arbitrary `mrbc` file
To realizing the "Build process: 2", enabled to specify `mrbc` created by
another build target or pre-built` mrbc`. Use `MRuby::Build#mrbcfile =` to
specify it explicitly. You can omit the "Build process: 1" by specifying
pre-built `mrbc`, and you can always use an optimized build to compile Ruby
sources faster. I think changes that affect the output of `mrbc` are rare,
so in many cases it helps to improve efficiency.
With presym, the build will be a little slower due to more build steps, but
this feature will improve it a bit.
### Create presym files for each build target
This feature was proposed at #5194 and merged once, but was reverted in
5c205e6e due to problems especially with cross-compilation. It has been
introduced again because this change solves the problem.
The presym files will be created below.
* `build/NAME/presym`
* `build/NAME/include/mruby/presym.inc`
### Other changes
* Because presym detection accuracy is greatly improved as mentioned above,
`MRuby::Gem::Specification#cdump?` is set to true by default, and
`disable_cdump` is added instead of `enable_cdump`. Also, support for gem
specific presym files has been discontinued (https://github.com/mruby/mruby/issues/5151#issuecomment-730967232).
* Previously, `mrbc` was automatically created for the `host` build, but it
will not be created if the build target for `mrbc` mentioned above is
automatically created. At this time, `mrbc` file of the `mrbc` build is
copied to` bin/`.
* Two types of `.d` files will be created, `.o.d` and `.i.d`. oThis is
because if `.i` depends on `presym.inc`, the dependency will circulate, so
the `.d` file cannot be shared.
* Changed file created with `enable_cxx_exception` to `X-cxx.cxx` from
`X.cxx` to use the mruby standard Rake rule.
### Note
Almost all C sources will need to be recompiled if there are any changes to
`persym.inc` (if not recompiled properly, it will often result in run-time
error). If `gcc` toolchain is used, dependencies are resolved by the `.d`
file, so it become automatically recompile target, but if not (e.g. MSVC),
it is necessary to manually make it recompile target.
Also, even if `gcc` toolchain is used, it may not become recompile target if
external gems does not use the mruby standard Rake rule. In particular, if
the standard rule is overwritten, such as
https://github.com/mruby/mruby/pull/5112/files, `.d` file will not be read,
so be careful.
Since `R-assignment` in CRuby is abandoned. Single-line pattern matching
in `mruby` only matches single local variable at the moment. Currently
it works as a right assignment to a local variable. It will be enhanced
in the future.
Files under `test/t` and `mrbgem/*/test` are for tests, not for actual
execution. So symbols in those files need not to be pre-allocated. This
change slightly reduce the memory consumption.
- Integrate `Fixnum` and `Integer`
- Remove `Integral`
- `int / int -> int`
- Replace `mrb_fixnum()` to `mrb_int()`
- Replace `mrb_fixnum_value()` to `mrb_int_value()`.
- Use `mrb_integer_p()` instead of `mrb_fixnum_p()`
Trailing `.0` is removed from `Float#to_s` and `Float#inspect` at
9d08025b. However, I think the more human-readable format is better
for `Float#inspect`.
For example, in the `Float#to_s` format, the failure message is not
well understood when testing values including types by `eql?` (e.g.
`Numeric#step` test).
```ruby
assert "example" do
exp = 1.0
act = 1
assert_operator(exp, :eql?, act) #=> Expected 1 to be eql? 1.
end
```
* The `Fixnum` constant is now an alias for the `Integer` class.
* Remove `struct mrb_state::fixnum_class` member.
If necessary, use `struct mrb_state::integer_class` instead.
- `MRB_WITHOUT_FLOAT` => `MRB_NO_FLOAT`
- `MRB_USE_FLOAT` => `MRB_USE_FLOAT32`
The former is to use `USE_XXX` naming convention. The latter is to make
sure `float` is 32bit float and not floating point number in general.
Check if the constant GEMNAME is defined before use in `assert.rb`.
This is added to prevent an undefined constant error when using
`assert.rb` in other environments - for example, testing CRuby.
Formerly, `__send__(*args)` modified `args` with `Array#shift`.
This bug affects optcarrot.
This changeset avoids the array destruction by using
`args = args[1, len-1]`.
#### Before this patch:
```console
$ bin/mruby rb -e '_0=:l; p ->{_0}.()'
-e:1:13: _0 is not available
-e:1:13: syntax error, unexpected $end, expecting '}'
```
#### After this patch (same as Ruby):
```console
$ bin/mruby rb -e '_0=:l; p ->{_0}.()'
:l
```
Because location info (file name and line number) is kept in the backtrace,
it should not be kept in the result of `inspect` (and the exception object
itself), I think.
### Example
```ruby
# example.rb
begin
raise "err"
rescue => e
p e
end
```
#### Before this patch:
```
$ bin/mruby example.rb
example.rb:2: err (RuntimeError)
```
#### After this patch:
```
$ bin/mruby example.rb
err (RuntimeError)
```
John Bampton