The Difference
Since Ruby1.9, the keyword arguments were emulated by Ruby using the hash
object at the bottom of the arguments. But we have gradually moved toward
keyword arguments separated from normal (positinal) arguments.
At the same time, we value compatibility, so that Ruby3.0 keyword
arguments are somewhat compromise. Basically, keyword arguments are
separated from positional arguments, except when the method does not
take any formal keyword arguments, given keyword arguments (packed
in the hash object) are considered as the last argument.
And we also allow non symbol keys in the keyword arguments. In that
case, those keys are just passed in the `**` hash (or raise
`ArgumentError` for unknown keys).
The Instruction Changes
We have changed `OP_SEND` instruction. `OP_SEND` instruction used to
take 3 operands, the register, the symbol, the number of (positional)
arguments. The meaning of the third operand has been changed. It is now
considered as `n|(nk<<4)`, where `n` is the number of positional
arguments, and `nk` is the number of keyword arguments, both occupies
4 bits in the operand.
The number `15` in both `n` and `nk` means variable sized arguments are
packed in the object. Positional arguments will be packed in the array,
and keyword arguments will be packed in the hash object. That means
arguments more than 14 values are always packed in the object.
Arguments information for other instructions (`OP_SENDB` and `OP_SUPER`)
are also changed. It works as the third operand of `OP_SEND`. the
difference between `OP_SEND` and `OP_SENDB` is just trivial. It assigns
`nil` to the block hidden arguments (right after arguments).
The instruction `OP_SENDV` and `OP_SENDVB` are removed. Those
instructions are replaced by `OP_SEND` and `OP_SENDB` respectively with
the `15` (variable sized) argument information.
Calling Convention
When calling a method, the stack elements shall be in the order of the
receiver of the method, positional arguments, keyword arguments and the
block argument. If the number of positional or keyword arugument (`n` or
`nk`) is zero, corresponding arguments will be empty. So when `n=0` and
`nk=0` the stack layout (from bottom to top) will be:
+-----------------------+
| recv | block (or nil) |
+-----------------------+
The last elements `block` should be explicitly filled before `OP_SEND`
or assigned to `nil` by `OP_SENDB` internally. In other words, the
following have exactly same behavior:
OP_SENDB clears `block` implicitly:
```
OP_SENDB reg sym 0
```
OP_SEND clears `block` implicitly:
```
OP_LOADNIL R2
OP_SEND R2 sym 0
```
When calling a method with only positional arguments (n=0..14) without
keyword arguments, the stack layout will be like following:
+--------------------------------------------+
| recv | arg1 | ... | arg_n | block (or nil) |
+--------------------------------------------+
When calling a method with arguments packed in the array (n=15) which
means argument splat (*) is used in the actual arguments, or more than
14 arguments are passed the stack layout will be like following:
+-------------------------------+
| recv | array | block (or nil) |
+-------------------------------+
The number of the actual arguments is determined by the length of the
argument array.
When keyword arguments are given (nk>0), keyword arguments are passed
between positional arguments and the block argument. For example, when
we pass one positional argument `1` and one keyword argument `a: 2`,
the stack layout will be like:
+------------------------------------+
| recv | 1 | :a | 2 | block (or nil) |
+------------------------------------+
Note that keyword arguments consume `2*nk` elements in the stack when
`nk=0..14` (unpacked).
When calling a method with keyword arguments packed in the hash object
(nk=15) which means keyword argument splat (**) is used or more than
14 keyword arguments in the actual arguments, the stack layout will
be like:
+------------------------------+
| recv | hash | block (or nil) |
+------------------------------+
Note for mruby/c
When mruby/c authors try to support new keyword arguments, they need
to handle the new meaning of the argument information operand. If they
choose not to support keyword arguments in mruby/c, it just raise
error when `nk` (taken by `(c>>4)&0xf`) is not zero. And combine
`OP_SENDV` behavior with `OP_SEND` when `n` is `15`.
If they want to support keyword arguments seriously, contact me at
<matz@ruby.or.jp> or `@yukihiro_matz`. I can help you.
Which represent `obj[int]` and `obj[int]=val` respectively where `obj`
is either `string`, `array` or `hash`, so that index access could be
faster. When `obj` is not assumed type or `R(a+1)` is not integer, the
instructions fallback to method calls.
Add n elements at once. Reduces instructions for huge array
initialization. In addition, `gen_value` function in `codegen.c` was
refactored and clarified.
This reverts commit fd10c72319.
I thought it was OK to restrict index value within 1 byte, but in some
cases index value could be 16 bits (2 bytes). I had several ideas to
address the issue, but reverting `fd10c72` is the easiest way. The
biggest reason is `mruby/c` still supports `OP_EXT[123]`, so that they
don't need any additional work.
Add new pool value type `IREP_TT_BIGINT` and generate integer overflow
error in the VM. In the future, `mruby` will support `Bignum` for
integers bigger than `mrb_int` (probably using `mpz`).
We have introduced following new instructions.
* `OP_LAMBDA16`
* `OP_BLOCK16`
* `OP_METHOD16`
* `OP_EXEC16`
Each instruction uses 16 bits operand for `reps` index. Since new
instructions are added, `mruby/c` VM should be updated.
Due to new instructions, dump format compatibility is lost, we have
increased `RITE_BINARY_MAJOR_VER`.
In addition, we have decreased the size of `refcnt` in `mrb_irep` from
`uint32_t` to `uint16_t`, which is reasonably big enough.
Jump target address is `operand (16bit)` + `address of next instruction`.
In addition, `ilen` was made `uint32_t` so that `iseq` length limitation
of 65536 is removed. Only jump target address should be within signed
16bit (-32768 .. 32767).
New instructions:
* OP_LOADL16
* OP_LOADSYM16
* OP_STRING16
Size of pools, symbols are `int16_t` but offset representation in the
bytecode was 8 bits. Size of child `irep` array is `int16_t`, too but
this change does not address it.
When a global jump occurs, look at the catch handler table to determine where to jump.
In that case, `pc` already shows the following instruction, but since the table shows `begin_offset ... end_offset`, the comparison is done with `begin_offset < pc && pc <= end_offset`.
If there is a corresponding handler, move `pc` to `handler.target_offset` and continue running the VM.
When a global jump across `ensure` is made by `return`, `break`, `next`, `redo` and `retry`, the extended `RBreak` object saves and restores the C-level execution position.
This extended `RBreak` can have tag information, which makes it a pseudo coroutine (the "tag" mimics CRuby).
The implementation of pseudo coroutines by `RBreak` is summarized by `CHECKPOINT_RESTORE ... CHECKPOINT_MAIN ... CHECKPOINT_END` and `throw_tagged_break` / `unwind_ensure` macros.
The restart of processing is branched by `RBREAK_TAG_FOREACH(DISPATCH_CHECKPOINTS)`.
- Not only `rescue` blocks but also `ensure` blocks are now sandwiched between `OP_EXCEPT` and `OP_RAISEIF`.
- Remove the function `ecall()`.
It is no longer necessary to re-enter the VM to perform an "ensure block".
This will resolves#1888.
- Added instruction `OP_JUW` (Jump while UnWind).
It jumps unconditionally like `OP_JMP`, but searches the catch handler table and executes the ensure block.
Since it searches the catch handler table, it is much heavier than `OP_JMP`.
- `OP_EXCEPT` checks if `mrb->exc` is `NULL`, `MRB_TT_EXCEPTION` or
`MRB_TT_BREAK`.
If `mrb->exc` is `NULL`, it will be replaced with `nil`.
- If `OP_RAISE` is `nil`, it does nothing and the immediately
following instruction is executed (like `OP_NOP`).
Also, in case of `RBreak` object, it moves to the processing for
`break`.
With this change, the instruction name is changed from
`OP_RAISE` to `OP_RAISEIF`.
The catch handler table is combined with iseq block.
This is to prevent the structure from growing by adding a field for the
catch handler table to the `mrb_irep` structure.
"iseq block" and "catch handler table":
[number of catch handler table (2 bytes)]
[number of byte code (4 bytes)]
[iseq (any bytes)]
[catch handlers (multiple of 7 bytes)]
catch handler:
[catch type (1 byte)]
[begin offset (2 bytes)]
[end offset (2 bytes)]
[target offset (2 bytes)]
catch type: enum mrb_catch_type (0 = rescue, 1 = ensure)
begin offset: Includes the specified instruction address
end offset: Does not include the specified instruction address
target offset: replaces pc with the specified instruction address
This table is not expanded by `read_irep_record_1()`.
The necessary elements are expanded one by one when used.
Changes:
- `pool format is completely replaced
- supported types: `STR`, `INT32`, `INT64`, `FLOAT`
- `FLOAT` may be replaced by binary representation in the future
- insert `NUL` after string literals in `mrb` files
- `irep->pool` no longer store values in `mrb_value`
- instead it stores in `mrb_pool_value`
- less allocation
- `mrb_irep` can be stored in ROM
Which loads 16bit integer to the register. The instruction number should
be reorder on massive instruction refactoring. The instruction is added
for `mruby/c` which had performance issue with `OP_EXT`. With this
instruction, `mruby/c` VM can just raise errors on `OP_EXT` extension
instructions.
Yukihiro "Matz" Matsumoto