admin/rescatux-chntpw
1
0
Fork 0
mirror of https://github.com/rescatux/chntpw synced 2026-06-21 14:07:44 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
master
rescatux-chntpw/regedit.txt
T
Adrian Gibanel Lopez 05445b7200 Initial commit of 11 May 2011 chntpw source code
2013-08-11 00:02:31 +02:00

439 lines
13 KiB
Plaintext
Raw Permalink Blame History

The Offline NT Password Editor
(c) 1997-2011 Petter Nordahl-Hagen
Registry Editor Usermanual/docs
See COPYING for copyright & credits.
See INSTALL for compile/installation instructions.
See README for docs on the passwordpart (or website for bootdisk)
Some known limitations as of first half 2011:
This release features full basic registry edit with
add/del keys and values and resizing values, and also
expanding the file.
Renaming keys and values is not implemented yet.
Import is slow. Export is fast.
Program "reged" is used for interactive registry edit
(rudimentary command prompt type interface)
or to export or import .reg files.
Import and export can also be scripted (non-interactive)
The "chntpw" program which is for password edits, also
contains the editor, but not the import / export.
Usage of "reged":
reged version 0.1 110504, (c) Petter N Hagen
Modes:
-x <registryhivefile> <prefixstring> <key> <output.reg>
Xport. Where <prefixstring> for example is HKEY_LOCAL_MACHINE\SOFTWARE
<key> is key to dump (recursively), . or \ or \\ means all keys in hive
Only one .reg and one hive file supported at the same time
-I <registryhivefile> <prefixstring> <input.reg>
Import from .reg file. Where <prefixstring> for example is HKEY_LOCAL_MACHINE\SOFTWARE
Only one .reg and one hive file supported at the same time
-e <registryhive> ...
Interactive edit one or more of registry files
Options:
-L : Log changed filenames to /tmp/changed, also auto-saves
-C : Auto-save (commit) changed hives without asking
-N : No allocate mode, only allow edit of existing values with same size
-E : No expand mode, do not expand hive file (safe mode)
-t : Debug trace of allocated blocks
-v : Some more verbose messages
-x will do export to .reg file.
It will create files that seems to be compatible with regedit.exe in
Windows.
The prefix is the first part of the key names that windows shows/uses,
it is not stored in the hive files, so you can actually put in
anything unless you have to import in Windows.
Current version only handles one set of files at a time (and also only
one point to start export from in it)
-I does import of .reg files into the specified hive file.
It supports .reg files from Windows regedit.exe, they are usually
UTF-16 (16 bit characters) and in the few cases I tested it will
import with correct characters. Please note that the key and value
names always are 8 bit in the registry, but strings the values store
are 16 bit characters.
Will also work with latin-1 (8 bit) character files, like the export
functions creates, but again some character conversions may be wrong.
Note that the current versions are pretty slow, since they are not
optimized or well written in any way. Around 90000 keys with 120000
values just took around 10 minutes on my pretty fast machine.
(I am lazy! You don't write hex reads with one byte at a time do you? :)
-e goes into interactive editor (see below for old example)
-e can be combined with -I so that the editor is entered before saving
-after an import.
-N and -E are safe modes, can be used with any mode.
-C must be used when importing to auto-save, else it will ask first if
import succeeds.
The -L option will write changed hive file names to /tmp/changed,
I use it for scripts that need to know.
------------------------
Here is an old demo of registry edit, via the chntpw program,
but regedit is the same (except some new stuff is in there)
You can navigate the registry almost like a filesystem (only difference
being that the "files" actually are of a special datatype, instead of
just a bytestream)
Note that this demo is just some random editing, will likely
cause windows to not boot if written back to it.
>chntpw -h
chntpw version 0.99.0 030111, (c) Petter N Hagen
chntpw: change password of a user in a NT SAM file, or invoke registry editor.
chntpw [OPTIONS] <samfile> [systemfile] [securityfile] [otherreghive] [...]
-h This message
-u <user> Username to change, Administrator is default
-l list all users in SAM file
-i Interactive. List users (as -l) then ask for username to change
-e Registry editor. Now with full write support!
-d Enter buffer debugger instead (hex editor),
-t Trace. Show hexdump of structs/segments. (deprecated debug function)
-L Write names of changed files to /tmp/changed
-N No allocation mode. Only (old style) same length overwrites possible
(example edit of a SYSTEM-hive)
>chntpw -e system
chntpw version 0.99.0 030111, (c) Petter N Hagen
Hive's name (from header): <SYSTEM>
ROOT KEY at offset: 0x001020
This is probably not a sam HIVE
Simple registry editor. ? for help.
[1020] > ?
Simple registry editor:
hive [<n>] - list loaded hives or switch to hive numer n'
cd <key> - change key
ls | dir [<key>] - show subkeys & values,
cat | type <value> - show key value
st [<hexaddr>] - show struct info
nk <keyname> - add key
dk <keyname> - delete key (must be empty. recursion not supported yet)
ed <value> - Edit value
nv <type> <valuename> - Add value
dv <valuename> - Delete value
delallv - Delete all values in current key
debug - enter buffer hexeditor
q - quit
(list the contents of the current key)
[1020] > l
ls of node at offset 0x1024
Node has 6 subkeys and 0 values
offs key name
[ 11b8] <ControlSet001>
[ dff88] <ControlSet002>
[1c2040] <LastKnownGoodRecovery>
[ de448] <MountedDevices>
[ de998] <Select>
[ deab8] <Setup>
(keynames & valuenames may be abbreviated, first match is used!)
(also, it's case sensitive, but NT is not)
[1020] > cd Cont
[11b8] \ControlSet001> l
ls of node at offset 0x11bc
Node has 4 subkeys and 0 values
offs key name
[ 1348] <Control>
[ 60628] <Enum>
[ 80b60] <Hardware Profiles>
[ 820f0] <Services>
[11b8] \ControlSet001>
[11b8] \ControlSet001> cd Ser
[820f0] \ControlSet001\Services> l
ls of node at offset 0x820f4
Node has 238 subkeys and 0 values
offs key name
[ 82148] <Abiosdsk>
[ 82270] <abp480n5>
[ 824b0] <ACPI>
[ 82628] <ACPIEC>
[ 82750] <adpu160m>
....
[ dcdc0] <WmiApSrv>
[ dd228] <wuauserv>
[ dd7d8] <WZCSVC>
[b92e0] \ControlSet001\Services\perc2> l
ls of node at offset 0xb92e4
Node has 1 subkeys and 4 values
offs key name
[ b9408] <Parameters>
offs size type value name [value if type DWORD]
[ b933c] 4 REG_DWORD <ErrorControl> 1 [0x1]
[ b9364] 28 REG_SZ <Group>
[ b93b4] 4 REG_DWORD <Start> 4 [0x4]
[ b93d4] 4 REG_DWORD <Type> 1 [0x1]
[b92e0] \ControlSet001\Services\perc2> cat Group
Value <Group> of type REG_SZ, data length 28 [0x1c]
SCSI miniport
[b92e0] \ControlSet001\Services\perc2> ed Start
EDIT: <Start> of type REG_DWORD with length 4 [0x4]
DWORD: Old value 4 [0x4], enter new value (prepend 0x if hex, empty to keep old value)
-> 1
DWORD: New value 1 [0x1],
(seems like we just switched it on)
[b92e0] \ControlSet001\Services\perc2> cd \ControlSet001\Control\ServiceGroupOrder
(Multi strings are a bit awkward..)
[51048] \ControlSet001\Control\ServiceGroupOrder> ed List
EDIT: <List> of type REG_MULTI_SZ with length 1948 [0x79c]
[ 0]: System Reserved
[ 1]: Boot Bus Extender
[ 2]: System Bus Extender
[ 3]: SCSI miniport
[ 4]: Port
...
[52]: SpoolerGroup
[53]: AudioGroup
[54]: NetworkProvider
[55]: RemoteValidation
[56]: NetDDEGroup
[57]: Parallel arbitrator
[58]: Extended Base
[59]: PCI Configuration
[60]: MS Transactions
Now enter new strings, one by one.
Enter nothing to keep old.
'--n' to quit (remove rest of strings)
'--i' insert new string at this point
'--q' to quit (leaving remaining strings as is)
'--Q' to quit and discard all changes
'--e' for empty string in this position
[ 0]: System Reserved
->
(Basically, press just enter to keep string in that postition)
(or enter something to overwrite that postion)
(else give commands as described)
[ 0]: System Reserved
->
[ 1]: Boot Bus Extender
->
[ 2]: System Bus Extender
->
[ 3]: SCSI miniport
-> SCSI megaport
(This will replace the string "SCSI miniport" with "SCSI megaport",
it will probably wreck things once NT boots :)
[ 4]: Port
-> --i
[ 4]: [INSERT]
-> SuperGroup
(Inserts "SuperGroup" as string #4, rest is moved down one)
[ 5]: Port
->
[ 6]: Primary Disk
-> --e
(Will clear the string in this position, empty string)
[ 7]: SCSI Class
-> --q
(keep the rest as is)
[51048] \ControlSet001\Control\ServiceGroupOrder> cd \ControlSet001\Control\SystemResources
[578a0] \ControlSet001\Control\SystemResources> cd Bu
[57f18] (...)\Control\SystemResources\BusValues> l
ls of node at offset 0x57f1c
Node has 0 subkeys and 11 values
offs size type value name [value if type DWORD]
[ 57f7c] 8 REG_BINARY <CBus>
[ 57fac] 8 REG_BINARY <Eisa>
[ 58914] 8 REG_BINARY <Internal>
[ 58934] 8 REG_BINARY <Isa>
[ 5897c] 8 REG_BINARY <MPI>
[ 5899c] 8 REG_BINARY <MPSA>
[ 589ec] 8 REG_BINARY <NuBus>
[ 58a0c] 8 REG_BINARY <PCI>
[ 589cc] 8 REG_BINARY <PCMCIA>
[ 58a74] 8 REG_BINARY <TurboChannel>
[ 58a3c] 8 REG_BINARY <VME>
[57f18] (...)\Control\SystemResources\BusValues> cat Internal
Value <Internal> of type REG_BINARY, data length 8 [0x8]
:00000 00 00 00 00 00 00 00 00 ........
[57f18] (...)\Control\SystemResources\BusValues> cat MPI
Value <MPI> of type REG_BINARY, data length 8 [0x8]
:00000 0A 00 00 00 00 00 00 00 ........
(and now for editing of binary or unhandled valuetypes)
[57f18] (...)\Control\SystemResources\BusValues> ed Internal
EDIT: <Internal> of type REG_BINARY with length 8 [0x8]
New length (ENTER to keep same):
(here you may enter a new size for the binary blob.
new space will be filled with zero's)
Buffer debugger. '?' for help.
.?
d [<from>] [<to>] - dump buffer within range
a [<from>] [<to>] - same as d, but without ascii-part (for cut'n'paste)
: <offset> <hexbyte> [<hexbyte> ...] - change bytes
h <from> <to> <hexbyte> [<hexbyte> ...] - hunt (search) for bytes
ha <hexbyte> [<hexbyte] - Hunt all (whole buffer)
s - save & quit
q - quit (no save)
instead of <hexbyte> etc. you may give 'string to enter/search a string
.
.d
:00000 00 00 00 00 00 00 00 00 ........
.:1 38 39
from: 1, wlen: 2
.d 0
:00000 00 38 39 00 00 00 00 00 .89.....
.:0 'edit
from: 0, wlen: 4
.d 0
:00000 65 64 69 74 00 00 00 00 edit....
(now, s will save the value, q will throw away the changes)
.s
[6f00] (...)\Control\SystemResources\BusValues> cat Internal
Value <Internal> of type REG_BINARY, data length 8 [0x8]
:00000 68 61 68 61 00 00 00 00 haha....
[6f00] (...)\Control\SystemResources\BusValues> cd \
[1020] > l
ls of node at offset 0x1024
Node has 6 subkeys and 0 values
offs key name
[ 11b8] <ControlSet001>
[ dff88] <ControlSet002>
[1c2040] <LastKnownGoodRecovery>
[ de448] <MountedDevices>
[ de998] <Select>
[ deab8] <Setup>
(now let's make a subkey here)
[1020] > nk DemoKey
[1020] > l
ls of node at offset 0x1024
Node has 7 subkeys and 0 values
offs key name
[ 11b8] <ControlSet001>
[ dff88] <ControlSet002>
[1c2ef8] <DemoKey>
[1c2040] <LastKnownGoodRecovery>
[ de448] <MountedDevices>
[ de998] <Select>
[ deab8] <Setup>
[1020] > cd DemoKey
[1c2ef8] \DemoKey> l
ls of node at offset 0x1c2efc
Node has 0 subkeys and 0 values
(it's empty. let's add a value)
[1c2ef8] \DemoKey> nv 1 test
(type 1 is string, 3 binary, 4 dword)
(HINT: type "nv h" for help)
[1c2ef8] \DemoKey> l
ls of node at offset 0x1c2efc
Node has 0 subkeys and 1 values
offs size type value name [value if type DWORD]
[ e0144] 0 REG_SZ <test>
(well, never mind, delete it)
[1c2ef8] \DemoKey> dv test
[1c2ef8] \DemoKey> l
ls of node at offset 0x1c2efc
Node has 0 subkeys and 0 values
[1c2ef8] \DemoKey> cd ..
[1020] > l
ls of node at offset 0x1024
Node has 7 subkeys and 0 values
offs key name
[ 11b8] <ControlSet001>
[ dff88] <ControlSet002>
[1c2ef8] <DemoKey>
[1c2040] <LastKnownGoodRecovery>
[ de448] <MountedDevices>
[ de998] <Select>
[ deab8] <Setup>
(and delete the key)
[1020] > dk DemoKey
[1020] > l
ls of node at offset 0x1024
Node has 6 subkeys and 0 values
offs key name
[ 11b8] <ControlSet001>
[ dff88] <ControlSet002>
[1c2040] <LastKnownGoodRecovery>
[ de448] <MountedDevices>
[ de998] <Select>
[ deab8] <Setup>
(list hives loaded, only one this time)
[1020] > h
* D 0 2097152 0x00200000 <system>
^ ^ hive# size(dec) size(hex) name
| |
| |--- Hive dirty flag.
|
|--- Current hive, being edited.
(hive 2 will change to hive #2 listed and so on..)
(now, let's quit)
[57f18] (...)\Control\SystemResources\BusValues> q
Hives that have changed:
# Name
0 <system>
Write hive files? (y/n) [n] : y
0 <system> - OK
(done)
Reference in New Issue View Git Blame Copy Permalink