This is a big step to split revng-lift in two parts: one that only
writes the model and one that actually lifts to LLVM IR.
* Introduce `revng import binary`
* Split off `BinaryFile.h`
* Drop `revng.h`
* `GeneratedCodeBasicInfo`: use model
* Reduce role of `GeneratedCodeBasicInfo` in favor of
`model::Architecture` and `model::Register` methods
* `CodeGenerator`: adopt `RawBinaryView` and model
* `JumpTargetManager`: adopt `RawBinaryView` and model
* `ExternalJumpsHandler`: adopt model
* `InstructionTranslator`: discard `Architecture` in favor of
`EndianessMismatch`
* Many other changes
This commit makes sure that GeneratedCodeBasicInfo can be used even in
absence of the `root`.
This also ensure that no time is wasted on brief/focused pipelines that
do not care about analyzing each basic block in the `root` function.
* Introduce GCBI::buildDispatcher
* Introduce GCBI::getJumpTarget{,Block} and GCBI::getBlocksGeneratedByPC
to easily map `BasicBlock *` to jump targets and viceversa.
* PCH::buildDispatcher now returns a list of the newly created basic
blocks.
* Other minor changes
Changes include:
- `getFunctionCall` has been moved in IRHelpers.h
- `getFallthrough` and `getFunctionCallCallee`
have been simplified and added in IRHelpers.h (their old versions
have been removed respectively from FCI.h and revng.h)
- `FCI::getCall` and `FCI::isCall` have been removed
due to redundancy with `getFunctionCall`.
This commit introduces the PruneRetSuccessors pass, whose role is to
identify all the indirect jumps whose devirtualized destinations
correspond to return addresses. In fact, they are most likely to be
return instructions and devirtualizing them is always detrimental.
This commit makes possible to execute the GeneratedCodeBasicInfo (GCBI)
Pass even on LLVM IR where the AnyPC and UnexpectedPC BasicBlocks are
not present.
This makes the GCBI pass more flexible, enabling more other passes to
depend on it and to use it to retrieve informations on the generated
code without architecture-dependent hacks.
As an example, one can now use GCBI to retrieve the CSV representing the
Stack Pointer Register or the Program Counter Register without relying
on the register names (which are architecture-specific), even if some
optimization pass along the decompilation pipeline has removed AnyPC or
UnexpectedPC.
Notice that the contracts of GCBI's methods has not been changed.
Calling anyPC() or unexpectedPC() still asserts that those are not
nullptr.
The contract has just been moved from the execution stage of the pass
(basically runOnModule), to the APIs used to query the results.
Unlike the previous iteration of `MetaAddress`, which tried to stuff all
the parts of `MetaAddress` within the existing `PC` CSV, this
implementation adds a set of new CSVs (or marks some existing ones as) to
represent the four portions of the current PC's `MetaAddress`.
* Introduce `ProgramCounterHandler`: a class responsible to maintain the
PC-related CSVs. This class is also used to manipulate the new
dispatcher.
* `AdvancedValueInfo`: update for new MetaAddress.
* External jump handler: do not clobber registers.
When introducing support for dynamic binaries, we didn't realize that
in x86-64 we were clobbering `r11`. To avoid this, we have to jump to
an address stored in memory. However, due to the new `MetaAddress`,
obtaining a *jumpable* address from the PC-related CSVs might require
some computations (and it does in ARM). Therefore, we introduce a new
global variable, `jumpablepc`, whose only role is to contain the
jumpable version of the program counter and then be the target of the
memory-indirect jump instruction.
* Labels care only about absolute addresses.
* CSAA: mark call site, even if no accesses.
`MetaAddress` replaces all the `uint64_t` used to represent a virtual
address. Its main features are:
* It has a non-zero representation of invalid addresses.
* It supports tags to represent code that has different interpretations but
resides at the same address in memory (namely ARM vs Thumb).
* Arithmetic operations cannot overflow.
* It supports epochs, a way we intend to employ to handle self-modifying code
(i.e., different code at the same address at different times).
* It supports "address spaces", which enable handling architectures with
multiple address spaces.
* It fits in two 64-bit registers.
* Drop unused argument names from function prototypes
* Make `static` some methods
* Disable some copy constructors
* Fix casing of Doxygen `\file` directives
* Add some casts to make the compiler happy
* Initialize `hasRelocationAddend` for AArch64
* Use references in range-for where possible
* Drop default for `switch` statements covering all the entries of an `enum`
* Make some global variables `static`
* Drop dead functions
LLVM 9 drops the `TerminatorInst` class. This commit replaces it with
`Instruction` where possible and asserts
`Instruction::isTerminator()`. It also switches from
`TerminatorInst::successors` to `successors(TerminatorInst *)`.
* `GeneratedCodeBasicInfo::getCSVUsedByHelperCall` and
`GeneratedCodeBasicInfo::extractCSVs`: make the call argument an
`Instruction`.
* Introduce `blockByName`
* Introduce `getUniqueUser`.
* Fix linking issues.
In the stack analysis, we used to consider helper functions as indirect
calls. However, the `CPUStateAccessAnalysis` provides us accurate
information about what an helper function does.
This commit transforms calls to helper functions in a series of ABI IR
instructions reading all the input registers of the helper functions and
a series of instructions writing the output registers.
Note that, while this is a serious improvement over considering them
indirect function calls, it's still suboptimal since
`CPUStateAccessAnalysis` doesn't provide us information as fine-grained
as the ABI analysis.
Previously, to enumerate all the CSVs we had to go through the
`GlobalVariable` of a `Module` and see if the were being used in
rev.ng-generated code.
Now we have a named metadata for that: `revng.csv`.
We used to save the type of a block in the `revng.block.type` metadata
as a number. This commit serializes it as a string.
In order to do this, the `BlockType` enum has been promoted to a
namespace with the usual `getName` and `fromName` functions.
This commit does the following:
* It drops `revamb-dump` and transforms all the passes it featured in
passes that can be used directly from `opt`.
* It rename `revamb` to `revng-lift`.
* It introduces a script called `revng` which acts as a driver for the
whole rev.ng project. It replaces `translate`, `revcc`,
`csv-to-ld-options` and `revamb-dump`, since it offers an `opt`
subcommand which allows to easily invoke all the analysis passes.
* It makes the project a CMake package that can be easily used
externally.
* It allows to easily create libraries of analysis to use through
`revng-opt`.
The `FunctionCallIdentification` analysis now provides a custom view on
the CFG where 1) dispatcher-related basic blocks are absent, 2) nodes
performing functions calls have an edge to their return address and 3)
nodes ending with a return instruction have no successor.
This CFG is now employed by the reaching definitions analysis and OSRA.
Additionally, the implementation of the `visitSuccessors` and
`visitPredecessors` method has been reviewed. It now consists in a class
that needs to be inherited and for which two methods should be
implemented, one to perform the visit of a block and another one to
enumerate the successors.
In addition, all the users of `visitSuccessors`/`visitPredecessors` have
been updated, a simple set of tests has been introduced and
`GeneratedCodeBasicInfo::visitPredecessors` has been dropped.
In function isolation, every time we met a jump to an unexpected basic
block (i.e., a basic block that is not part of the current function), we
used to throw an exception. However this is unnecessary since oftentimes
it is sufficient to call the `function_dispatcher` or even perform a
regular function call.
The most obvious example is the case of a direct tail call. In this
situation performing a function call to the corresponding isolated
function is the most appopriate thing to do.
`getType` didn't have a `BlockType` to represent the entry basic block
of the `root` function. Therefore, such basic block was erroneously
identified as a translated basic block.
This commit uses SET, information about canonical values and labels to
detect if an indirect function call is targeting an external symbol.
The strings used for the name of external symbols are uniqued global
variables. This commit also uses this approach for the disassembly of
original instructions, which used to be metadata.
This commit reimplements the (conditional) reaching definitions passes
as an instance of a monotone framework.
The `ConditionNumberingPass` has also been reworked in the way it
exposes its results, but it's otherwise unchanged.
A proper unit testing framework is also available to ensure everything
works as supposed to.
This commit moves around most files. The new directory structure is as
follows:
* `lib/$LIBRARY/`: contains a library, i.e., a set of `.cpp` files used
by multiple libraries/tools.
* `include/revng/$LIBRARY/`: contains the public headers associated to
the library in `lib/$LIBRARY/`.
* `tools/$TOOL/`: directory where all the `.cpp` files (and private
headers) for a tool reside. Currently we have two tools: `revamb` and
`revamb-dump`.
On top of this, all file names are now in camel case.
Pietro Fezzardi