Remove unnecessary check for Paths.count > 0 as there is code later to use the current working directory since -Path is not a mandatory parameter.
Updated ShouldProcess to output the internal action on adding paths rather than the user action (which is the cmdlet name).
Updated tests to not specify -Path
Fix#5594
closes#2662
This feature adds the ability to restrict the SSL/TLS protocol used when making the web request. In 5.1 the user could make use of .NET API's to enforce this on the Web Cmdlets. With the move to HttpClient in PowerShell Core, those APIs have no impact. The user still has requirements to ensure specific protocols are used.
The public enum WebSslProtocol is added as a wrapper to the underlying SslProtocols enum. Neither it nor SecurityProtocolType can be used because Ssl3 and Ssl2 are not supported by HttpClientHandler.SslProtocols. While it may not be intuitive to a PowerShell user to use -bor or "Tls, Tls11" to set multiple options, the general use case for this will be a single protocol.
Adds -SslProtocol parameter to Web Cmdlets
Adds WebSslProtocol Enum to support limited subset of SslProtocol enum supported by HttpClientHandler
Adds TLS 1.1 and TLS 1.0 listening ports to WebListener
- Add an error when a user tries to use `-Credential` (legacy usage without `-Authentication`) or `-UseDefaultCredentials` over a non-HTTPS URI
- User can bypass error with `-AllowUnencryptedAuthentication`
- `-UseDefaultCredentials` can only be reliably tested on Windows as support on other platforms depends on a Kerberos infrastructure.
- Add `/Auth/` tests to WebListener for challenge authentication Basic, Negotiate, and NTLM
Incidentally, this increases test coverage for the web cmdlets as `-Credential` and `-UseDefaultCredentials` were not being tested.
* Add Remove-Alias Command. Add Remove-Alias Test. Add Remove-Alias to .psd1.
* Fix code-formatting. Fix ErrorAction on Remove-Alias instead of preference variable. Remove unnecessary Get-Alias calls. Switch Force parameter to auto property. Add ValueFromPipeline to Remove-Alias Name parameter.
* Remove empty lines. Add Remove-Alias to Unix Module .psd1. Add Remove-Alias to approved Commands test. Remove Try/Catch for SessionstateException. Add WriteError for aliasnotfound exception.
* Add ErrorAction Stop to all Get-Alias and Set-Alias Cmdlets in all tests for consistency. Add Should BeNullOrEmpty to "should throw if alias does not exist" test to verify that foo alias really is not there before removing it.
* Changed Remove-Alias parameter Name to String-Array. Changed Cmdlet Process Logic to work with String Array. Added Alias named "ral". Added test case for Alias "ral". Added "ral" Alias to list of approved Aliases. Replaced foo and bar values in all tests with better names.
* Remove "ral"-alias test as this is covered in DefaultCommands.Tests.ps1. Add test for removing multiple alias at once. Fix wrong curly braces positioning.
* Remove $FullCLR in DefaultCommands.Tests.ps1 for Remove-Alias and "ral" alias.
* Add Alias "ral" to Remove-Alias Cmdlet.
* Remove "ral" alias as this is handled by using the [Alias()] attribute on the Remove-Alias Cmdlet.
* Replace alias names used in Remove-Alias Cmdlet tests with GUIDs to avoid collisions
Since DCOM is not supported in corefx there was a great deal of dead code in the computer cmdlets.
This PR removes all vestiges of DCOM support from:
- Rename-Computer
- Restart-Computer
- Stop-Computer
removing about 4500 lines of dead code. Also, tests are updated to provide more complete coverage.
I also removed test-connection completely to make way for @iSazonov upcoming PR to improve coverage in tests, I created some test hook code which will test the cmdlet code without actually calling the WMI method to restart/rename/stop the system
Address #3623.
Implementation symmetric to traditional code path that returns a PSCustomObject. Code is shared on the top level but 2 low level methods were difficult to share, therefore 2 separate but similar methods were created for HashTables.
All existing tests related to this change were adapted to also test against this new switch and were slightly improved.
-AsHashtable is an existing pattern used in Group-Object
Added the following to the Get-Service command:
•BinaryPathName (Was suggested as ServicePath )
•Description
•UserName (Was suggested as LogOnAs )
•DelayedAutoStart
•ServiceStartupType
The ServiceStartupType was also added, providing the user access to use services like in services.msc , having Automatic , Automatic (Delayed Start) , Manual and Disabled as options (Also includes InvalidValue as an initial value for ServiceStartupType )
This unifies file encoding across the inbox cmdlets to be UTF-8 without a BOM for all platforms. This is a breaking change as cmdlets on windows have a number of different encodings. This supports better interoperability with tradition Linux shells as we are using the same encoding.
Validate that files are created with UTF-8 encoding without BOM
Update tests to validate Encoding parameter to new type and create new tests for
parameter type validation.
[Breaking Change] The '-Encoding Byte' has been removed from the filesystem provider cmdlets. A new parameter '-AsByteStream' is now added to indicate that a byte stream is required as input, or output will be a stream of bytes.
* Add depth to ProcessPathItems
* Honors capped recursion when using Include or Exclude filters with Get-ChildItem
* Including test cases to test include/exclude recursion
* Swap optional parameter for overload
•Sets -NoTypeInformation as the default behavior for Export-Csv and ConvertTo-Csv
•Hides the -NoTypeInformation parameter switch
•Adds -IncludeTypeInformation switch to Export-Csv and ConvertTo-Csv to enable legacy behavior
•Provides a terminating error when both -NoTypeInformation and -IncludeTypeInformation are supplied
•adds tests for the new behavior
•fixes existing tests to align with new behavior
The new behavior will need to be documented.
For PSCore 6, we are only supporting InitialSessionState. The RunspaceConfiguration APIs were already made internal. This PR removes all the code related to RunspaceConfiguration. This also means that some public APIs have changed. Was deciding between leaving the RunspaceConfiguration parameters and throwing Unsupported, but thought it was better to have it a compile-time error. This should simplify the code base.
Closes#4274
Adds an -Authentication parameter to Invoke-RestMethod and Invoke-WebRequest
Adds an -Token parameter to Invoke-RestMethod and Invoke-WebRequest
Adds an -AllowUnencryptedAuthentication parameter to Invoke-RestMethod and Invoke-WebRequest
Adds tests for various -Authorization uses
-Authentication Parameter has 3 options: Basic, OAuth, and Bearer
Basic requires -Credential and provides RFC-7617 Basic Authorization credentials to the remote server
OAuth and Bearer require the -Token which is a SecureString containing the bearer token to send to the remote server
If any authentication is provided for any transport scheme other than HTTPS, the request will result in an error. A user may use the -AllowUnencryptedAuthentication switch to bypass this behavior and send their secrets unencrypted at their own risk.
-Authentication does not work with -UseDefaultCredentials and will result in an error.
The existing behavior with -Credential is left untouched. When not supplying -Authentication, A user will not receive an error when using -Credential over unencrypted connections.
Code design choice is meant to accommodate more Authentication types in the future.
Documentation Needed
The 3 new parameters will need to be added to the Invoke-RestMethod and Invoke-WebRequest documentation along with examples. Syntax will need to be updated.
- Rename powershell.exe to pwsh.exe
- Fixe appveyor.psm1
- Update MSI to include 'pwsh' in path and app paths
- Revert change for hyper-v powershell direct
- Update names in packaging.psm1.
- Fix check for SxS
* Test fixes and updates to code coverage automation
* Fixed UpdatableHelpSystem tests and tab completion tests
* Fixed tab completion tests to better disambiguate root/interop namespace.
* Skip SSH test if ssh.exe is not present
* Get-Verb: add descriptions and prefixes
* Add description and alias prefix tests
* Make the new classes internal
* Convert alias prefix to static method
* Move verb descriptions to a resource file
* Shorten function name
* Shorten alias prefix function name
* Change tests to look at counts
* Add uniqueness test
* Add missing alias prefixes
* Fix name collision
* Change alias prefix for Compare
* Rename method
* Remove unnecessary string allocation
* Make tests easier to diagnose
* enable using filesystem from a UNC location
* [feature]
address PR feedback
* [feature]
removed changed in NavigationProviderBase and made change in FileSystemProvider where it should belong
* added variations of tests for set-location and push-location
no need to run [feature] anymore since it passed previously and the test case added is CI
* [feature]
move code to reproduce UNC path to GetParentPath()
* [feature]
fix detection of whether `-LiteralPath` was used to suppress wildcardexpansion
* [feature]
skip -literalpath test with asterisk in filename as that's not valid on Windows
* [feature]
added more variations of tests
* SetServiceCommand: Add positional parameter attribute
Added a positional parameter attribute to the InputObject parameter,
giving Set-Service behavior similar to the other *-Service cmdlets.
* Add test for positional InputObjects [Feature]
Added a test to Set-Service validating InputObjects passed positionally.
* [feature]
support folders and files with colon in name
* [feature]
only check separator in relation to colon if a colon is found
* [feature]
added comment to clarify algorithm
* added more tests
Fix test setup that was using `New-PSSession` instead of the helper function `New-RemoteSession` that works with AppVeyor. Re-enabled the pending test since it now works. Also added a check to ensure WinRM remoting is enabled and an endpoint is available for PowerShell 6.0.
Mark Kraus