Make PowerShell Core reads group policy settings from different registry keys (Windows only) and the configuration files (both Windows and Unix).
- On Windows, move to different GPO registry keys.
- On both Windows and Unix, read GPO related settings from the configuration file `powershell.config.json`.
- On Windows, the policy settings in registry take precedence over the configuration file.
- Enable policy controlled logging and transcription on Unix.
Issue #4029 exposed two problems when failing to load libpsrpclient.
WSManAPIDataCommon.ctor was not identifying the binary that failed DLLImport; hindering diagnosability
PrioritySendDataCollection.Clear() would throw a NullReferenceException when called from the finalizer after an error path.
This change addresses both of the above:
Guard against null arrays in PrioritySendDataCollection.Clear() - called from finalizer in error paths.
Diagnosability: Log the DllNotFoundException in WSManAPIDataCommon ctor and also include it as the internal exception when throwing PSRemotingTransportException.
* enable win-arm and win-arm64 builds
* fix using arm64 tools for build
fix finding vs2017 dynamically
* change install-powershellremoting.ps1 script to use reg provider rather than reg.exe so that error doesn't show on success
fix formatting issue in cmake.defs
* add check that path being read from config file is valid
address PR feedback
* fix copying of PowerShell.Core.Instrumentation as VS2017 puts it in $HOME/source
address PR feedback
Remove unnecessary check for Paths.count > 0 as there is code later to use the current working directory since -Path is not a mandatory parameter.
Updated ShouldProcess to output the internal action on adding paths rather than the user action (which is the cmdlet name).
Updated tests to not specify -Path
Fix#5594
This resolves issue #5391, which is tagged with 6.0.0-GA, therefore this should help with getting pwsh out of the door in January.
It removes PerformWSManPluginReportCompletion as stated in the issue and its associated class member g_pPluginContext, which is now unused as well.
The best reviewer is probably @mirichmo , who raised the initial issue with very helpful descriptions or @dantraMSFT who is currently assigned to the issue.
Replace the static `powershell.inc` filename with a name based on the current RID, so that the build doesn't confuse when running in the same local repository on WSL.
CoreCLR doesn't call finalizer on process exit. PowerShell relies on the CLR finalizer to clean up state on exit. In this case, a Runspace pool was not closed or disposed and any pipeline worker threads created to run concurrent scripts won't end, causing the hang. The same thing can happen if any individual Runspace is created to run a concurrent script and is not closed.
We cannot use the `AppDomain.DomainUnload` event because it's not supported by the default load context. The `AppDomain.ProcessExit` event is also not helpful since it is only called during application exit which means threads already have to be cleaned up.
The fix introduces a static property called `PrimaryRunspace` to `Runspace`. When the PrimaryRunspace is closing it means that the PowerShell session is ending and on exit clean should be performed. The static property `PrimaryRunspace` can only be set once per process.
closes#2662
This feature adds the ability to restrict the SSL/TLS protocol used when making the web request. In 5.1 the user could make use of .NET API's to enforce this on the Web Cmdlets. With the move to HttpClient in PowerShell Core, those APIs have no impact. The user still has requirements to ensure specific protocols are used.
The public enum WebSslProtocol is added as a wrapper to the underlying SslProtocols enum. Neither it nor SecurityProtocolType can be used because Ssl3 and Ssl2 are not supported by HttpClientHandler.SslProtocols. While it may not be intuitive to a PowerShell user to use -bor or "Tls, Tls11" to set multiple options, the general use case for this will be a single protocol.
Adds -SslProtocol parameter to Web Cmdlets
Adds WebSslProtocol Enum to support limited subset of SslProtocol enum supported by HttpClientHandler
Adds TLS 1.1 and TLS 1.0 listening ports to WebListener
* Add dependency nuget packaging instructions for PowerShell.Core.Instrumentation ETW resource binary.
* Fix markdown MD031 Fenced code blocks errors.
* Fix MD022 Headers should be surrounded by blank lines
* Add a note about Authenticode Dual-signing requirement.
* PR Feedback.
* Set version to Beta.10
- Add an error when a user tries to use `-Credential` (legacy usage without `-Authentication`) or `-UseDefaultCredentials` over a non-HTTPS URI
- User can bypass error with `-AllowUnencryptedAuthentication`
- `-UseDefaultCredentials` can only be reliably tested on Windows as support on other platforms depends on a Kerberos infrastructure.
- Add `/Auth/` tests to WebListener for challenge authentication Basic, Negotiate, and NTLM
Incidentally, this increases test coverage for the web cmdlets as `-Credential` and `-UseDefaultCredentials` were not being tested.
- Build PowerShell.Core.Instrumentation.dll - Resource-only binary for the ETW resources.
- Create a registration script for registering/unregistering the ETW provider.
- Revert refactoring changes so that it doesn't break remoting to Windows PowerShell 5.1
- Fix the rest of the supported types for remoting
- Put remoting sensitive private members in a descriptive region
This PR is divided into the following areas:
1. Add/Rename the PowerShell/Windows ETW manifest to the repo and change both the provider id (guid) and name. See #4939.
The manifest is at tools/resxgen/PowerShell-Core-Instrumentation.man
2. Generate a resx file containing the string resources needed for logging ETW events to syslog.
This is accomplished by tools\resxgen\resxgen.psm1 and resxgen.ps1. The tool generates two files
A resx file containing string resources for each message string from the manifest. This is generated in the System.Management.Automation\gen directory.
A C# class (EventResource) that provides the mapping between the integer event id and the associated string resource name. The file is generated in the System.Management.Automation\CoreCLR directory with a compile-time condition of UNIX
NOTE: The EventResource.cs class generated by resgen is explicitly ignored in the csproj file; it is not used.
3. SMA\utils\tracing\PSSysLogProvider.cs
Implements the abstract LogProvider class and is the syslog equivalent of PSEtwLogProvider. The class contains a number of logical methods for logging lifecycle, health, and normal events.
4. SMA\utils\tracing\SysLogProvider.cs
This is the Syslog equivalent of ETW's log provider class and implements a Log method versus ETW's EventWrite. It is also responsible for resolving event ids to resource names and performing the Syslog call. There is a large comment block in the class XML doc that describes the types of log output it produces.
5. SMA\utils\tracing\PSEtwLog.cs
PowerShell's current implementation is tightly coupled to this class; with code calling it directly for all events. To simplify integration of syslog, I updated the class to create an instance of PSSysLogProvider on Linux and removed the Linux-specific stub file.
6. SMA\engine\PropertyAccessor.cs
This class provides a wrapper around PowerShellProperties.json and has been extended to have Unix-specific assessors for configuring logging. Note that the file is expected to be in the $PSHOME directory to ensure SxS.
Currently, there are four configuration properties:
- LogIdentity - the string identifier for the source application. This defaults to 'powershell' and can be configured to enable distinguishing between side-by-side installations.
- LogLevel - configures the tracing level (log level). Informational is the defauilt.
- LogChannels - used to enable operational and analytic logging. Operational is the default.
- LogKeywords - used to configure enabling tracing by keyword. All keywords other than `UseAlwaysAnalytic` are enabled by default.
NOTE: This will likely change. PowerShell sometimes confuses the analytic channel with this keyword and sends logging to the wrong channel. Once this is cleared up, `UseAlwaysAnalytic` and `UseAlwaysOperational` keywords will likely be removed.
Additional Notes:
1. The current implementation writes directly to syslog and writing to a separate log file is still pending.
2. The generated class and resx are not part of the build; instead, it is expected that Resxgen should be run when events are added to the manifest. To fully automate the process, resxgen will need to be updated to generate the other dependent enums such as 'PSChannel', 'PSEventId', 'PSTask', 'PSOpcode', etc. You will see parsing logic in resxgen.psm1 to prepare for that but it is not enabled at this point.
4. Documentation is pending that documents the format of the syslog output as well as associated configuration.
5. As mentioned at the start, tests are pending
* Add Remove-Alias Command. Add Remove-Alias Test. Add Remove-Alias to .psd1.
* Fix code-formatting. Fix ErrorAction on Remove-Alias instead of preference variable. Remove unnecessary Get-Alias calls. Switch Force parameter to auto property. Add ValueFromPipeline to Remove-Alias Name parameter.
* Remove empty lines. Add Remove-Alias to Unix Module .psd1. Add Remove-Alias to approved Commands test. Remove Try/Catch for SessionstateException. Add WriteError for aliasnotfound exception.
* Add ErrorAction Stop to all Get-Alias and Set-Alias Cmdlets in all tests for consistency. Add Should BeNullOrEmpty to "should throw if alias does not exist" test to verify that foo alias really is not there before removing it.
* Changed Remove-Alias parameter Name to String-Array. Changed Cmdlet Process Logic to work with String Array. Added Alias named "ral". Added test case for Alias "ral". Added "ral" Alias to list of approved Aliases. Replaced foo and bar values in all tests with better names.
* Remove "ral"-alias test as this is covered in DefaultCommands.Tests.ps1. Add test for removing multiple alias at once. Fix wrong curly braces positioning.
* Remove $FullCLR in DefaultCommands.Tests.ps1 for Remove-Alias and "ral" alias.
* Add Alias "ral" to Remove-Alias Cmdlet.
* Remove "ral" alias as this is handled by using the [Alias()] attribute on the Remove-Alias Cmdlet.
* Replace alias names used in Remove-Alias Cmdlet tests with GUIDs to avoid collisions
Mariah