Since non-default constructors are now evaluated for autowiring,
there is no need anymore for setting autowiring mode or exposing
it in Kotlin bean DSL.
Issue: SPR-17292
Support for Kotlin primary constructor and non-default public constructors in addition to default instantiation, aligned with AnnotationConfigApplicationContext and model attribute processing.
Issue: SPR-17292
Declaring beanPostProcessors (and also embeddedValueResolvers) as CopyOnWriteArrayList prevents ConcurrentModificationExceptions in case of concurrent registration/access attempts.
Issue: SPR-17286
1. Helper method to eliminate duplication in formatting (de-)serialized
values for logging introduced with prior commit #e62298.
2. Helper method for TRACE vs DEBUG logging with different details.
Issue: SPR-17254
At DEBUG show up to 100 chars, at TRACE show full formatted value.
Note that the formatValue helper method is duplicated a number of times
in this commit. A utility method will likely be added in spring-core
through an extra commit.
Issue: SPR-17254
This commit makes sure that in DataBufferUtils.write, any received data
buffers are returned as part of the returned flux, even when an error
occurs or is received.
Issue: SPR-16782
Before this commit, Kotlin inner class nested configuration
handling thrown an IndexOutOfBoundsException due to bogus filtering
of its constructor parameter reference to an instance of the outer
class.
This commit keep constructor parameter of type INSTANCE in order to
throw a more meaningful NoSuchBeanDefinitionException.
Issue: SPR-17222
placeholders
Spring 4.3 introduced support for registering a default embedded value
resolver for the default environment, in case of none having been
registered through post-processors (like PropertyPlaceholderConfigurer
and PropertySourcesPlaceholderConfigurer. However, the existing
documentation – stating that a static
PropertySourcesPlaceholderConfigurer bean is required in order for
values coming from @PropertySource declarations to be honored – was not
updated to reflect the change.
This commit addresses this by updating the JavaDoc for @Configuration
and @PropertySource accordingly
Issue: SPR-17212
1. Rename globalResources to useGlobalResources.
2. Use of global resources is mutually exlusive with explicit config.
3. Allow Consumer<HttpResources> to configure global resources.
4. Allow ConnectionProvider + LoopResources Supplier to customize
creation and initialization.
5. Do not manage externally provided ConnectionProvider + LoopResources
instances.
Issue: SPR-17243
This commit adds decoder/message-reader tests for errors in
the source data buffer publisher. Because the tests extend
AbstractDataBufferAllocatingTestCase, they also check whether
the buffers that precede the error in the stream are properly
released.
Issue: SPR-17025
This commit optimizes Flux <-> Mono conversions in our codebase by
avoiding to hide that conversion from Reactor.
This tries to keep conversions sequentially so that they can be detected
by Reactor and optimized. In Spring WebFlux, this means keeping the
conversions at the edges of a method implementation (right when getting
an input parameter, and before returning it as a result). If those
conversions are made between other operators, Reactor might not be able
to detect those conversions and optimize them.
Issue: SPR-17203
This commit introduces a dependency on the Awaitility assertion
framework and makes use of asynchronous assertions in order to make
tests for asynchronous events more robust.
Issue: SPR-17211
Aligned with HibernateJpaDialect, using ConnectionHandle as functional interface now. Also, LazyConnectionDataSourceProxy supports Connection holdability as applied by HibernateTransactionManager, for use with prepareConnection=true.
Issue: SPR-17216
Prior to this commit, an bug introduced in SPR-16949 prevented
`Mono.empty` bodies from being written to the response.
This commit ensures that empty bodies still trigger the writing to the
response and does not hang the processing of the exchange.
Issue: SPR-17220
This commit represents a best effort attempt at fixing remaining
"a" vs. "an" grammatical errors related links specified via a fully
qualified class name.
Issue: SPR-17208
When used as global Netty resources, ReactorResourceFactory creates and
sets those resources on Reactor's HttpResources directly.
When that ReactorResourceFactory bean is destroyed, those resources are
disposed but HttpResources still holds a reference to those and may try
to use them again.
This commit uses HttpResources to clear those resources and its
references to it, when the ReactorResourceFactory is treating those as
global.
Issue: SPR-17199
JettyResourceFactory, similar to ReactorResourceFactory, allows
to share resources (Executor, ByteBufferPool, Scheduler) between
Jetty clients and servers.
Issue: SPR-17179
Prior to this commit, when using the `SimpleClientHttpRequestFactory`
as a driver for `RestTemplate`, the HTTP response body would only be
drained if there was an attempt to read it in the first place.
This commit ensures that, even if there's no attempt at reading the
response body, it is properly drained when the response is closed to
make sure that the connection is released in a proper state and can be
put back in the connection pool for reuse.
Issue: SPR-17181
When dealing with `Optional` values in a Controller handler (for
example, values coming from a Spring Data repository), developers might
reuse this code snippet quite often:
```
@GetMapping("/user")
public ResponseEntity<Optional<User>> fetchUser() {
Optional<User> user = //...
return user.map(ResponseEntity::ok).orElse(notFound().build());
}
```
This commit adds a new static method on `ResponseEntity` for that,
simplifying the previous snippet with `return ResponseEntity.of(user);`
Note that in case more specific HTTP response headers are required by
the application, developers should use other static methods to
explicitly tell which headers should be used in each case.
Issue: SPR-17187
Includes caching of declared annotation arrays and combined searching for several annotation types (used in SpringCacheAnnotationParser).
Issue: SPR-16933
Prior to this commit, if a test class was meta-annotated with multiple
@BootstrapWith declarations that registered different
TestContextBootstrapper implementations, such a configuration would
result in an IllegalStateException, and there was no way to override
this behavior.
This commit addresses this shortcoming by relaxing the explicit
TestContextBootstrapper resolution in BootstrapUtils so that a directly
present @BootstrapWith annotation will now override declarations of
@BootstrapWith that are meta-present. In other words, if @BootstrapWith
is used as a meta-annotation, it can be overridden directly on the test
class via an explicit, local declaration of @BootstrapWith.
Issue: SPR-17006
This commit handles "empty" cases for `ResponseEntity` controller
handler return types when wrapped with a `java.util.Optional` in Spring
MVC or a single `Publisher` like `Mono`.
Given the following example for Spring MVC:
```
@GetMapping("/user")
public Optional<ResponseEntity<User>> fetchUser() {
Optional<User> user = //...
return user.map(ResponseEntity::ok);
}
```
If the resulting `Optional` is empty, Spring MVC will infer a
`ResponseEntity` with an empty body and a 404 HTTP response status.
The same reasoning is applied to Spring WebFlux with Publisher types:
```
@GetMapping("/user")
public Mono<ResponseEntity<User>> fetchUser() {
Mono<User> user = //...
return user.map(ResponseEntity::ok);
}
```
This feature is only valid for `HttpEntity` return types and does not
apply to `@ResponseBody` controller handlers.
Issue: SPR-13281
Rename "Builder" sub-section to "Configuration" and move it in the
beginning before all others since it explains how to create a client
in the first place.
Update content on Reactor Netty connector based on the API in 0.8 and
specifically address Reactor Netty resources and lifecycle.
Issue: SPR-16963
Prior to this commit, ScriptUtils supported MySQL-style escapes ('\\')
when splitting a script into statements; however, MySQL-style escapes
were not supported when determining if a given script contained a
specified statement delimiter. This caused executeSqlScript() to
erroneously fallback to a newline as the statement separator in such
cases.
This commit fixes this issue by implementing the same check for
MySQL-style escapes in containsSqlScriptDelimiters() that was already
present in splitSqlScript().
Issue: SPR-17120
This commit enables the `-use` javadoc flag so that class usage pages
are included in the aggregated JavaDoc that is published to
https://docs.spring.io/spring-framework/docs/.
Issue: SPR-17173
No that JCacheCache extends AbstractValueAdaptingCache instead of
directly implementing Cache an import statement can be used in favor
of using the FQCN for the field and constructor arguments.
For consistency with AnnotationAsyncExecutionInterceptor (based on AnnotatedElementUtils.findMergedAnnotation) which is the main companion of AnnotationMatchingPointcut's checkInherited mode.
Issue: SPR-16933
This commit allows to specify a custom CorsConfigurationSource
in AbstractHandlerMapping (both Servlet and Reactive variants).
AbstractHandlerMapping#getCorsConfigurations method is now
deprecated.
Issue: SPR-17067
1. Update ExchangeFilterFunctions to delegate internally to
HttpHeaders.setBasicAuth(user, password).
2. Remove deprecation from
ExchangeFilterFunctions.basicAuthentication(String user, String password)
It is still useful as a filter to insert the header.
3. Update deprecation notes.
Issue: SPR-17099
Forwarded headers are now processed before ServerWebExchange is created
through ForwardedHeaderTransformer which has the same logic as the
ForwardedHeaderFilter but works on the request only.
ForwardedHeaderFilter is deprecated as of 5.1 but if registered it is
removed from the list of filters and ForwardedHeaderTransformer is used
instead.
Issue: SPR-17072
This revision considers any java/javax and org.springframework.lang annotations as not synthesizable upfront, checking not only in isSynthesizable but also at synthesizeAnnotation(Array) level.
Issue: SPR-16933
Empty Maps are preferably initialized without capacity (not initializing them at all or lazily initializing with default capacity when needed).
Issue: SPR-17105
This commit introduces Protobuf support in WebFlux via dedicated
codecs.
Flux<Message> are serialized/deserialized using delimited Protobuf
messages with the size of each message specified before the message
itself. In that case, a "delimited=true" parameter is added to the
content type.
Mono<Message> are expected to use regular Protobuf message
format (without the size prepended before the message).
Related HttpMessageReader/Writer are automatically registered when the
"com.google.protobuf:protobuf-java" library is detected in the classpath,
and can be customized easily if needed via CodecConfigurer, for example
to specify protocol extensions via the ExtensionRegistry based
constructors.
Both "application/x-protobuf" and "application/octet-stream" mime types
are supported.
Issue: SPR-15776
Prior to this commit, controller handlers (regular and exception
handlers as well) would not overwrite existing HTTP response headers on
the exchange. This would lead to situations where Content-Type values
set during the initial handling phase would not be overwritten when
handling an error later on.
This commit aligns the implementation of that result handler on the
Spring MVC one in that regard.
Issue: SPR-17082
1. Revise @SubscribeMapping to address common points of confusion.
2. Add ExecutorSubsribableChannel.
3. Split Events and Interception in two.
Issue: SPR-16950
In order to be consistent with SPR-15776, and since it does not
provide clear added value, this commit deprecates
ExtensionRegistryInitializer and uses ExtensionRegistry
parameter instead in ProtobufHttpMessageConverter and
ProtobufJsonFormatHttpMessageConverter constructors.
Issue: SPR-17081
Introduces getBeanProvider(Class) and getBeanProvider(ResolvableType), also narrowing getBean(String, Class) and isTypeMatch(String, Class) to a non-null Class argument and enriching NoUniqueBeanDefinitionException with a full ResolvableType. In addition, ObjectProvider supports iterable/stream access for collection-style resolution of multiple matching beans now, and collection injection falls back to an empty collection in a single-constructor case with non-null arguments.
Issue: SPR-17075
Issue: SPR-11419
Issue: SPR-15338
This commit adds support for single-value reactive types in
@MessageMapping by converting them using ReactiveAdapterRegistry
and MonoToListenableFutureAdapter.
MonoToListenableFutureAdapter previously package private and used only
in org.springframework.messaging.tcp.reactor has been moved to
org.springframework.messaging.support and made public in order to be
used by ReactiveReturnValueHandler as well.
Issue: SPR-16634
This commit ignores errors like TransformerFactoryConfigurationError
that can be thrown when instantiating SourceHttpMessageConverter on
platforms where no TransformerFactory implementation is available,
like when compiling/running as GraalVM native images.
Issue: SPR-17007
This commit includes an optimization of BeansUtils#instantiateClass
that favors Java reflection for default constructors before leveraging
Kotlin one for finding primary constructors and avoids Kotlin related
conditions when running in Java.
Issue: SPR-17069
This revision limits serializability of derived interfaces, superclasses and type parameters, optimizing for introspection performance instead.
Issue: SPR-17070
Adds XML-based assertions in
org.springframework.test.web.reactive.server.WebTestClient.BodyContentSpec
for asserting against the XML body as well as xPath,
similar to those assertions offered when using
MockMvcResultMatchers.xpath().
Issue: SPR-16741
Since SPR-15205, the `FormHttpMessageConverter` is adding a `charset`
directive to the `Content-Type` request header in order to help servers
understand which charset is being used to encode headers of each part.
As reported in SPR-17030 and others, some servers are not parsing
properly such header values and assume that `boundary` is the last
directive in the `Content-Type` header.
This commit reorders the charset information right before the boundary
declaration to get around those issues.
Issue: SPR-17030
Prior to this commit, the `DefaultClientResponse` implementation would
handle HTTP client cases where the server response body would need to be
consumed (pooled resources need to be released) and the body publisher
cancelled right away. This is done to avoid reading the whole response
body and returning the connection to the pool, now that this connection
cannot be reused.
This was done already when the `WebClient` is asked for a `Void` type
for the response body.
SPR-17054 brought a new case for that: whenever no message reader is
able to decode the response body, an `UnsupportedMediaTypeException`
error signal is sent. Prior to this commit, the response body would not
be consumed and cancelled for that case.
This commit refactors all those cases from the `DefaultClientResponse`
directly into the `BodyExtractors`, since most of the logic and
knowledge for that belongs there. We only need to only apply this
behavior when the HTTP client is involved, as the server does not want
this to happen.
Issue: SPR-17054
See Javadoc on UriComponentsBuilder#uriVariables for details.
This helps to prepare for SPR-17027 where the MvcUriComponentsBuilder
already does a partial expand but was forced to build UriComonents
and then create a new UriComponentsBuilder from it to continue. This
change makes it possible to stay with the same builder instance.
Issue: SPR-17027
After the latest changes, two small fixes in the clone method to copy
the encode flag, and in the encodeUriTemplate method to account for
possible null query params.
Improvements in the URI encoding section.
Issue: SPR-17039, SPR-17027
Provides a non-null guarantee for MethodMatcher's targetClass argument and strict separation between IntroductionAwareMethodMatcher and regular MethodMatcher, enabling DefaultAdvisorChainFactory to defer its IntroductionAdvisor determination until encountering an actual IntroductionAwareMethodMatcher (even behind union/intersection).
Issue: SPR-17068
Given "/{foo}" and "/a=42;c=b", previously that would be treated as a
sequence of matrix vars with an empty path variable. After the change
the path variable "foo" is "a=42".
This should be ok for backawards compatibility since it's unlikely for
anything to rely on an empty path variable.
Issue: SPR-11897
The HandlerMethodParameter arrangement uses an approach similar to ModelAttributeMethodProcessor's FieldAwareConstructorParameter, merging the local parameter annotations with interface-declared annotations.
Issue: SPR-11055
Leverage https://github.com/jetty-project/jetty-reactive-httpclient
to add support for Jetty in WebClient via JettyClientHttpConnector.
Implemented with buffer copy instead of optimized buffer wrapping
because the latter hangs since Callback#succeeded doesn't allow
releasing the buffer and requesting more data at different times
(required for Mono<DataBuffer> for example).
See https://github.com/eclipse/jetty.project/issues/2429.
Issue: SPR-15092
Prior to this commit, resolving an argument for a WebFlux controller
that's missing from the request and not required by the handler would
throw a NullPointerException in some cases.
This involves the conversion of the parameter (a `String` parameter type
might not trigger this behavior) and sending a `null` within a reactive
stream, which is illegal per the RS spec.
We now rely on a `Mono.justOrEmpty()` to handle those specific cases.
Issue: SPR-17050
Includes tests for parsing all available locales on the JVM, checking toString/toLanguageTag equality between parsed and original locale.
Issue: SPR-7598
Issue: SPR-16651
Like CookieLocaleResolver, LocaleChangeInterceptor parses both locale formats by default now. Since it does not need to render the locale, its languageTagCompliant property is not relevant anymore at all.
The parseLocale method in StringUtils validates the locale value now and turns an empty locale into null, compatible with parseLocaleString behavior and in particular aligned with web locale parsing needs.
Issue: SPR-16700
Issue: SPR-16651
Includes an extension of SmartValidator for candidate value validation, as well as nullability refinements in Validator and BindingResult.
Issue: SPR-16840
Issue: SPR-16841
Issue: SPR-16854
DefaultUriBuilderFactory now uses EncodingMode.TEMPLATE_AND_VALUES by
default. However the RestTemplate explicitly sets it to the previous
setting EncodingMode.URI_COMPONENTS, so this affects mainly the
WebClient and any direct use of DefaultUriBuilderFactory to configure
either the RestTemplate or the WebClient.
Issue: SPR-17039
The ability to request to encode before `build()`, and more importantly
before expanding, allows stricter encoding to be applied to URI vars
and consequently to neutralize the effect of characters with reserved
meaning in a URI.
Issue: SPR-17039
Introduces a configure method pattern for Supplier-style configuration and a common SingletonSupplier decorator for method reference suppliers. Also declares jcache.config and jcache.interceptor for non-null conventions.
Issue: SPR-17021
This commit removes the session threshold check added recently which
is not effective since maxIdleTime is usually much longer than the
frequency of checks. The lazy triggering of expiration checks during
create or retreive are simple and the most effective
This commit also adds a maxSessions limit on the total number of
sessions that can be created at any one time, a getSessions method
for management purposes, and a removeExpiredSessions public API
for manual triggering of expiration checks.
Issue: SPR-17020, SPR-16713
Prior to this commit, `WebClient` would throw `IllegalArgumentException`
when receiving an HTTP response with an unknown HTTP status code.
This commit is a follow up of SPR-16748 (supporting non-standard HTTP
status codes on the reactive `ClientHttpResponse`), and is mirroring
SPR-15978 (supporting non-standard HTTP status codes in `RestTemplate`).
With this change, `WebClient` now tolerates unknown status codes in some
cases, while not offering that choice as a first class citizen:
`HttpStatus` is still the preferred way to deal with HTTP status codes.
Here's how `WebClient` will behave when fetching the full response:
```
// Given a remote endpoint returning a "123" HTTP status code
Mono<ClientResponse> result = this.webClient.get()
.uri("/status/123")
.exchange();
// will still throw an IllegalArgumentException
HttpStatus status = result.block().statusCode();
// is safe and will return 123
int statusCode = result.block().rawStatusCode();
```
Resolving directly the response body with `retrieve()` is different.
```
// will send an error signal with a UnknownHttpStatusCodeException
Mono<String> result = this.webClient.get()
.uri("/status/123")
.retrieve()
.bodyToMono(String.class);
```
In general, `WebClient` will provide high-level support
for well-known HTTP status codes, like error handling with
`WebClient.ResponseSpec#onStatus`.
For such support with unknown status codes, it is better to rely
on lower level constructs such as `ExchangeFilterFunction`.
Issue: SPR-16819
1. Add session count threshold as am extra pre-condition.
2. Check pre-conditions for expiration checks on every request.
Effectively an upper bound on how many sessions can be created before
expiration checks are performed.
Issue: SPR-17020
This commit restricts the support of `"Content-Range"` when returning
`Resource` instances from Controllers - now only "HTTP 200 OK" responses
will be considered, as Controllers might want to handle content range
themselves.
Issue: SPR-16921
1. Use special category prefix "spring-web.reactivestreams" for logging
of reactive streams signals in spring-web, since those are quite
verbose would fill the logs at TRACE.
2. Add and use loggers in request and websocket session implementations
separate from reactive streams bridge for regular TRACE logging.
3. Improve log messages and add where missing (e.g. for Reactor)
Issue: SPR-16898
Hiding it (at AbstractServerHttpRequest) complicates matters since
requests are often mutated and decorated, plus it's also possible to
implement the interface directly (we've one, albeit corner case).
Issue: SPR-16966
1. Eliminate WebSocketClientSupport base class whose main value was
to provide logging but those methods get in the way of inserting a
log prefix.
2. Remove checks and synchronization in lifecycle methods of Jetty
client since underlying Jetty client already has that.
This involves a new ResourceTransactionDefinition variant that JpaTransactionManager indicates a transaction-local EntityManager on. HibernateJpaDialect uses this indicator for hard read-only behavior.
Issue: SPR-16956
LocalSessionFactoryBean automatically registers its containing BeanFactory as a BeanContainer when Hibernate 5.3 or higher is on the classpath.
Issue: SPR-16305
SessionHolder extends EntityManagerHolder now, allowing for @PersistenceContext and co to interact with HibernateTransactionManager's thread-bound transactions, and SpringSessionContext is capable of interacting with JpaTransactionManager by detecting a plain EntityManagerHolder as well.
Issue: SPR-17002
This commit introduces a test to verify that multiple declarations of
@BootstrapWith that register the same TestContextBootstrapper type
(i.e., duplicates) do not result in an error.
Issue: SPR-17006
After this change sameSite still gets a default value of "Strict" in
CookieWebSessionIdResolver but for changes to either sameSite or secure
it is now expected to use
addCookieInitializer(Consumer<ResponseCookie.ResponseCookieBuilder>).
Issue: SPR-16418, SPR-16980
In order to allow Spring Framework applications running as GraalVM
native images, ReactiveAdapterRegistry should perform explicit class
checks instead of catching Throwable in order to avoid
UnsupportedFeatureError errors.
Issue: SPR-17000
Includes specific fine-tuning of ProtobufHttpMessageConverter and JAXB2 based message converters, as well as revised javadoc for abstract base classes.
Issue: SPR-16995
Includes an efficient implementation of isEmpty(), not relying on a full entry count but rather backing out once a non-empty hash segment has been found.
Issue: SPR-16994
Includes a clarification of ThreadPoolExecutor configuration options and a note on early AsyncConfigurer initialization.
Issue: SPR-16944
Issue: SPR-16945
Allows for skipping the now-deprecated postProcessPropertyValues callback with its expensive PropertyDescriptor retrieval requirement. RequiredAnnotationBeanPostProcessor (which is dependent on postProcessPropertyValues) and the @Required annotation itself are also deprecated now: in favor of constructor injection (or afterPropertiesSet).
Issue: SPR-16918
This commit introduces RouterFunctions.Builder, a new way to build
router functions that does not require static imports, thus being more
discoverable and convenient.
Issue: SPR-16953
Polish a few issue identified when adding checkstyle to the
build. Although checkstyle is not enforcing rules on tests,
these are a few minor changes that are still worth making.
Issue: SPR-16968
Reorganize imports to ensure consistent ordering. This commit also
expands any `.*` static imports in favor of using fully-qualified
method references.
Issue: SPR-16968
Update all classes so that inner classes are always last. Also
ensure that utility classes are always final and have a private
constructor and make exceptions final whenever possible.
Issue: SPR-16968
Add checkstyle to the build to enforce Spring Framework coding
conventions. Rule suppressions are used for several classes where
relaxing the rules makes more sense than fixing them.
Issue: SPR-16968
In SPR-16892, the `EncoderHttpMessageWriter` has been improved to write
`"Content-Length"` HTTP response headers if the response body is of type
`Mono` (i.e. the actual content length is easily accessible without
buffering a possibly large response body). That change was relying on
the fact that the server side is using a `ChannelSendOperator` to delay
the writing of the body until the first signal is received.
This strategy is not effective on the client side, since no such channel
operator is used for `WebClient`. This commit improves
`EncoderHttpMessageWriter` and delays, for `Mono` HTTP message bodies
only, the writing of the body so that we can write the
`"Content-Length"` header information once we've got the body resolved.
Issue: SPR-16949
Allow the `Environment` to accept a generic `Profiles` interface which
can support more complex matching rules. The previous
`acceptsProfiles(String...)` method now uses `Profiles.of` which
supports basic profile expressions such as "(a | b) & !c"
Issue: SPR-12458
This commit adds support for the "SameSite" attribute in response
cookies. As explained in rfc6265bis, this attribute can be used to limit
the scope of a cookie so that it can't be attached to a request unless
it is sent from the "same-site".
This feature is currently supported by Google Chrome and Firefox, other
browsers will ignore this attribute.
This feature can help prevent CSRF attacks; this is why this commit adds
this attribute by default for SESSION Cookies in WebFlux.
See: https://tools.ietf.org/html/draft-ietf-httpbis-rfc6265bis
Issue: SPR-16418
Also, ZeroCopyHttpOutputMessage provides writeWith(Path, int, int), enforcing that variant as the implementation target in 5.1 (analogous to FilePart).
Issue: SPR-16925
@PathVariable's javadoc states that it supports MultiValueMap
parameters (introduced by commit df0902), but by reading through the
code, that does not seem to be the case (compare, e.g.,
PathVariableMapMethodArgumentResolver to
RequestParamMapMethodArgumentResolver).
Moreover, parsing MultipleValueMap is done according to the ";"
character, and placing such a character in a path (e.g., consider
something like "/app/{param}/show" would just break the path.
This patch fixes PathVariable's javadoc by removing the mention of
MultiValueMap.
This commit fixes the write checks for
`ResourceRegionHttpMessageConverter`, which was previously not checking
properly the parameterized type (e.g. in case of a `List<Something>`).
Issue: SPR-16932
This commit restricts the allowed HTTP methods on HiddenHttpMethodFilter
(Reactive variant) to the following: PUT, DELETE, PATCH.
This filter is meant to be used to simulate those methods from HTML
forms sent by browsers, so no other methods are allowed.
Issue: SPR-16836
This commit restricts the allowed HTTP methods on HiddenHttpMethodFilter
(Servlet variant) to the following: PUT, DELETE, PATCH.
This filter is meant to be used to simulate those methods from HTML
forms sent by browsers, so no other methods are allowed.
Issue: SPR-16836
Prior to this commit, the generated POMs for Spring Framework modules
would contain unneeded/harmful information from the Spring Framework
build:
1. The BOM imports applied to each module by the dependency
management plugin, for example for Netty or Reactor Netty.
Spring should not export that opinion to its POMs.
2. The exclusion of "org.slf4:jcl-over-slf4j" from *all* dependencies,
which made the POMs much larger than necessary and suggested to
developers that they should exclude it as well when using all those
listed dependencies. In fact, only Apache Tiles currently brings that
transitively.
This commit removes that information from the POMs.
The dependencyManagement Gradle plugin is disabled for POM generation
and we manually resolve the dependency versions during the generation
phase.
The Gradle build is streamlined to exclude "org.slf4:jcl-over-slf4j"
only when necessary.
Issue: SPR-16893
After the Groovy 2.5 upgrade, the Spring Framework build on JDK9 hit
GROOVY-8631. Adding the relevant `jax-api` dependency to the module
didn't fix this issue. The Groovy release notes mention the use of the
`--add-modules` JVM flag, but this is not an option for this build which
should run on JDK8 -> JDK11.
This commit changes the dependency from `groovy-all` to more focused
dependencies on Groovy in the `spring-beans` and `spring-context`
modules. This change seems to avoid the automatic loading of Groovy
enhancements to JAXB (shipped with `groovy-xml`).
See:
* http://groovy-lang.org/releasenotes/groovy-2.5.html#Groovy2.5releasenotes-Knownissues
* https://issues.apache.org/jira/browse/GROOVY-8631
Issue: SPR-15407
This commit adds FormContentFilter, which is the same as the
HttpPutFormContentFilter but also supports DELETE.
The HttpPutFormContentFilter is now deprecated.
Issue: SPR-16874
The key in CachingResourceResolver now includes the "Accept-Encoding"
request header cleaned to exclude "*", "identity", and parameters, and
also sorted alphabetically.
For encoded resources the response now includes a response header with
"Vary: Accept-Encoding".
Issue: SPR-16381
The new EncodedResourceResolver is a generalized version of
GzipResourceResolver that can be configured to support different
content codings, by "br" and "gzip".
GzipResourceResolver is now deprecated.
Issue: SPR-16381
This commit makes it possible to pass attributes from the WebSession of
a handshake request to the WebSocketSession, by configuring a
Predicate<String> on HandshakeWebSocketService.
Issue: SPR-16212
After the recent changes to expose configuring TcpOperations, it no
longer makes sense to automatically log the relayHost/Port since that's
mutually exclusive with a custom TcpOperations.
Instead we delegate to TcpOperations.toString().
Issue: SPR-16801
DefaultMultipartHttpServletRequest always returned mulitpart parameter
values only rather than aggregating with query parameters, which
contradicts with Servlet spec, section 3.1, and is inconsistent with
StandardMultipartHttpServletRequest.
Issue: SPR-16590
This commit removes all places where forwarded headers are checked
implicitly, on an ad-hoc basis.
ForwardedHeaderFilter is expected to be used instead providing
centralized control over using or discarding such headers.
Issue: SPR-16668
This commit exposes the resource lookup function used by
`RouterFunctions.resources(String, Resource)`, so that it can be
composed upon.
Issue: SPR-16788
This commit introduces support for creating a new `ServerRequest` from
an existing instance. This is especially useful when filtering requests
in a HandlerFilterFunction.
Issue: SPR-16707
Prior to this commit, a YAML entry that define an empty array value was
lost. This commit makes sure to flag it with an empty String, which
corresponds as an empty comma separated list of entries in the
properties format.
Issue: SPR-16769
With this commit, WebFlux server uses warning instead of error log level
for request handling, and also just print the message instead of the
stacktrace which is mostly meaningless in reactive world.
Complementary to this change, Reactor Netty removed additional logging
as part of https://github.com/reactor/reactor-netty/issues/339.
Issue: SPR-16688
1. Consistent with "xml code" examples.
2. "xml()" is a static method and will use default builder config,
so use createXmlMapper(true) instead.
3. Fix mvc namespace tag typo.
Prior to this commit, the `AbstractMessageConverterMethodProcessor`
would fail to convert `InputStreamResource` to `ResourceRegion` as
expected, since the content length cannot be read without consuming the
stream. This is enforced by the `HttpRange` class.
Now the method processor would still try to output HTTP range response
headers to provide range support information. This step is using the
resource content length and reads the input stream, leading to
exceptions such as "IllegalStateException: InputStream has already been
read".
This commit improves the return type detection and excludes early
`InputStreamResource` return types. With those types, HTTP range support
is now completely disabled.
Issue: SPR-16754
ServerSentEventHttpMessageReader had logic to split on new lines
and buffer until an empty new line (start of a new event). To account
for random data chunking, it later re-assembled the lines for each
event and split again on new lines. However bufferUntil was still
unreliable a chunk may contain nothing but a newline, which doesn't
necessarily mean an empty newline in the overall SSE stream.
This commit simplifies the above by delegating the splitting of the
stream along newlines to StringDecoder.
Issue: SPR-16744
Prior to this commit, due to KT-5464 type inference issue there was not
proper way to provide body expectations with WebTestClient. This commit
provides a workaround by updating the existing Kotlin extension to
return a Kotlin compatible API.
Issue: SPR-15692
Includes efficient check for same ClassLoader in ClassUtils.isVisible, efficient MethodMatchers check for IntroductionAwareMethodMatcher, and supertype method resolution in MethodMapTransactionAttributeSource.
Issue: SPR-16723
Prior to this commit, the various `HttpMessageConverter` instances
configured for a given `RestTemplate` instance could all contribute
`MediaType` values to the "Accept:" request header.
This could lead to duplicate media types in that request header,
cluttering for the HTTP request for no reason.
This commit ensures that only distinct values are added to the request.
Issue: SPR-16690
This commit introduces a deferred initialization of the declared beans
in order to make it possible to access to the environment (and even
to the context for advanced use-cases) in the beans { } Kotlin DSL.
Issues: SPR-16269, SPR-16412
HandlerMethodReturnValueHandlerComposite and
AbstractMethodMessageHandler iterate using index over collections
implementing RandomAccess to avoid unnecessary iterators.
Using the simple example shown in the ticket but switching from
Mono<String> to Flux<String> (and 5,000,000 onNext calls) shows that
constant pausing causes significant overhead and is not worth the
trouble vs ignoring the onWritePossible in REQUESTED state.
Issue: SPR-16702
Undertow does not provide a way to check if we can write so with the
current implementation of isWritePossible, deep recursion can occur
when writing slows down. We now use a flag to keep track of write
ChannelListener callbacks.
This commit also addresses a related issue in
AbstractListenerWriteProcessor that went undected since #3c2d186
where after a large (single) buffer that is not written fully, the
completion signal is processed before the all data is written.
Issue: SPR-16702
Includes direct use of ControllerMethodInvocationInterceptor for return type Object, avoiding the attempt to generate an Object subclass.
Issue: SPR-16710
Spring's CGLIB fork is patched with local copies of affected files here, introducing the notion of a "contextClass" (e.g. the proxy superclass) which gets passed through to ReflectUtils.defineClass for delegating to MethodHandles.Lookup.defineClass eventually, against a privateLookupIn(contextClass) lookup context on JDK 9/10/11.
Issue: SPR-15859
This commit documents the difference between configuring the socket
timeout on the `RequestConfig` and on the `SocketConfig`.
The first one does not affect timeouts when establishing an SSL
connection or sending a CONNECT request to a proxy. For these use cases,
it is required to configure `SocketConfig` on the `HttpClient` instance
directly.
Issue: SPR-16697
Gradle 4.6 provides built-in support for the JUnit Platform within the
standard `test` task.
This commit configures a custom `testJUnitJupiter` test task for
executing JUnit Jupiter tests directly on the JUnit Platform instead of
indirectly on JUnit 4 via @RunWith(JUnitPlatform.class).
This switch provides for better integration with Gradle's test reporting
and paves the way for a possible transition to the JUnit Platform in the
future.
Issue: SPR-16672
This commit specifies a local packageListUrl and defines that dokka task
must be executed after the api task in order to be able to build KDoc
during the release process when the Spring Framework's Javadoc is not
published yet.
Issue: SPR-16687
This breaks the package dependency cycle between web.server/web.method and makes ServerErrorException more generally applicable. Includes deprecation of the plain reason constructor variant, in favor of providing a Method or MethodParameter context (which MatrixVariableMethodArgumentResolver does now).
Prior to this commit it was impossible to have an individual
constructor argument in a @Nested (i.e., inner) test class injected via
@Autowired, @Qualifier, or @Value.
This is due to a bug in javac on JDK versions prior to 9, whereby
annotation lookups performed directly via the
java.lang.reflect.Parameter API fail for inner class constructors.
Specifically, the parameter annotations array in the compiled byte code
for the user's test class excludes an entry for the implicit enclosing
instance parameter for an inner class constructor.
This commit introduces a workaround in ParameterAutowireUtils for this
off-by-one error by transparently looking up annotations on the
preceding Parameter object (i.e., index - 1). In addition, this commit
relies on the change recently introduced in MethodParameter in order to
compensate for the same JDK bug (see SPR-16652).
Issue: SPR-16653
In my opinion, we should parse ":{x}" style parameter as "x" is parameter using "NamedParameterUtils.parseSqlStatement",
so the condition "j - i > 2" is the correct condition, not "j - i > 3", because if "i" is the index of
":" in ":{x}", and "j" is the index of "}" in ":{x}", "j - i == 3" is true.
Also add a test case for SPR-16663.
This commit introduces tests for looking up annotations on parameters
in constructors for nested and inner classes via Spring's
MethodParameter abstraction.
The test for an inner class is currently disabled since it fails on
JDK 8. See JIRA issue for details.
Issue: SPR-16652
Consistently return "*/*" if no media types were requested rather than
an empty list. Existing code has to check for both in any case to see
if nothing was requested.
Issue: SPR-16624
Consistently return "*/*" if no media types were requested rather than
an empty list. Existing code has to check for both in any case to see
if nothing was requested.
Issue: SPR-16624
This commit introduces @Nested tests to verify support for constructor
injection when using the SpringExtension.
One of the tests is disabled on Java 8 due to a bug in javac that was
first fixed in JDK 9.
See https://github.com/junit-team/junit5/issues/1345 for details.
The prevailing current wisdom is to use the default constructor for
secure and let it pick the best algorithm for the OS.
On Java 8 (Oracle), Linux this results in "NativePRNG" which uses
/dev/random (potentially blocking) for the initial seed, and
/dev/urandom (non-blocking) for subsequent calls to nextInt.
Issue: SPR-16635
Rather than create a new EvaluationContext instance per evaluation, we
now create a statically shared instance, without the root object in it,
and re-use it for all evalutations.
The web.server package is quite low-level and should not depend on web.bind in order to avoid a dependency cycle. Extracting the introspection of the ResponseStatus annotation into a WebFlux-level subclass resolves the cycle.
Issue: SPR-16567
Undertow does not provide a way to check if data is available to read
but instead we have to try to read and see if any data is returned.
This makes it impossible to implement checkOnDataAvailable without
trying to read and that can lead to infinite recursion like this:
...
UndertowServerHttpRequest$RequestBodyPublisher.checkOnDataAvailable(UndertowServerHttpRequest.java:156)
AbstractListenerReadPublisher.changeToDemandState(AbstractListenerReadPublisher.java:177)
AbstractListenerReadPublisher.access$900(AbstractListenerReadPublisher.java:47)
AbstractListenerReadPublisher$State$4.onDataAvailable(AbstractListenerReadPublisher.java:319)
AbstractListenerReadPublisher.onDataAvailable(AbstractListenerReadPublisher.java:85)
UndertowServerHttpRequest$RequestBodyPublisher.checkOnDataAvailable(UndertowServerHttpRequest.java:156)
This commit prevent the call to checkOnDataAvailable() when switching
states from READING->DEMAND which implies we exited the readAndPublish
loop because there was no more data to read.
Issue: SPR-16545
This commit allows several DeferredImportSelector instances to be
grouped and managed in a centralized fashion. This typically allows
different instances to provide a consistent ordered set of imports to
apply.
Issue: SPR-16589
This commit picks up where SPR-14498 left off by adding support for an
explicit target type when using JsonPath to perform an assertion against
the response content using a Hamcrest Matcher.
Specifically, there is a new overloaded value(Matcher<T>, Class<T>)
method in JsonPathResultMatchers for use with Hamcrest matchers where
the target type (i.e., Class<T>) can be specified.
Issue: SPR-16587
With this change the code generation for method and property
references is modified to include branching logic in the
case of null safe dereferencing (?.). This is complicated
by the possible usage of primitives on the left hand side
of the dereference. To cope with this case primitives are
promoted to boxed types when this situation occurs enabling
null to be passed as a possible result.
Issue: SPR-16489
This commit restructures the existing content to separate out Overview
content into its own section, and also introduces more formal structure
where reference type content can be expanded over time.
Issue: SPR-16547
Prior to this commit, the `HttpEntityMethodProcessor` would check HTTP
conditions on non-safe requests (i.e. not GET/HEAD). This would prevent
Controllers from returning `ResponseEntity` containing response headers
with updated values of `"Last-Modified"` or `ETag` once the resource has
been updated.
This commit avoids those checks for non GET/HEAD requests - this code
can still be leveraged from Controllers themselves using
`ServletWebRequest::checkNotModified` methods.
Issue: SPR-15780
After send error, ignore calls to complete or completeWithError by the
application in the same thread (e.g. try-catch block), to avoid a
competing with an error callback from servlet container during which
the same action is taken.
Issue: SPR-16548
When checking whether there is still request body the first method
that should be checked is ServletInputStream.isReady() and then
ServletInputStream.isFinished(). ServletInputStream.isReady() is the active
method whereas the ServletInputStream.isFinished() is not.
It is important to call ServletInputStream.isReady() because if it returns
false it will schedule a dispatch and if the request body is already read it will
send onAllDataRead event.
Issue: SPR-16521
Includes related polishing in core.metadata and datasource.embedded and a revision of the corresponding database definitions in sql-error-codes.
Issue: SPR-16558
This commit makes sure that no `StringIndexOutOfBoundsException` is
thrown when `getForRequestUrl` is called with a URL that's shorter than
the expected context path.
Issue: SPR-16526
Jackson2Tokenizer now also wraps JsonProcessingException's on
endOfInput(), as it also does in tokenize(DataBuffer). This ensures
treating those errors as 400 vs 500.
Issue: SPR-16521
When read returns -1, we know we've reached the end of input. Instead
of waiting for the onAllDataRead container callback, this commit
proactively calls onAllDataRead.
Issue: SPR-16521
Make the protected fields in AbstractJackson2Encoder private plus
minor refactoring to the way streaming separators are applied.
The current (5.0.3) behavior is to always use '\n', but in 5.0.4 the
newly supported "application/stream+x-jackson-smile" needs to be
excluded from that. For now, separator determination remains private
in the abstract base class, but current behavior remains which is to
apply '\n' by default.
Issue: SPR-15424
This commit adds an Asciidoc anchor to the section on different injection
styles to be able to link to the discussion as official recommendation.
Closes gh-1681
As of 4.3.13 MappingJackson2MessageConverter uses the MethodParameter
hint to obtain generic type information but it needs to be careful, and
nest one level, if the target parameter type has a Message wrapper.
Issue: SPR-16486
This commit introduces DataBuffer.asInputStream(boolean), that can
release the underlying buffer when the stream is closed.
Furthermore, this commit adds additional javadoc.
Issue: SPR-16444
After this commit the use of interval in tests is combined with
take(n).onBackpressureBuffer(n) to ensure emissions don't fail if the
fixed rate is exceeded (e.g. on slow CI server).
Tests that verify N number of items followed by verifyOnComplete()
should set the number of emissions to N.
Tests that verify N number of items followed by thenCancel() should
set the number of buffered to an arbitrary number greater than N.
This commit updates HttpWebHandlerAdapter and
ResponseStatusExceptionHandler in order to specify the method/uri in the
logged message.
It also logs a WARN message for bad request (400) HTTP responses in
order to get some logs when an exception is thrown due to client error
(unable to deserialize request body for example).
Issue: SPR-16447
Previously MockHttpServletRequestBuilder calculated the pathInfo from the
provided URL without decoding the value. This meant that the pathInfo
incorrectly included URL encoded values.
Now MockHttpServletRequestBuilder properly decodes the pathInfo.
Fixes: SPR-16453
MockHttpServletResponse no longer calls flushBuffer on calls to
getContentAsByteArray and getContentAsString. The flushing doesn't
actually do anything useful but does commit the response leading to
unexpected side effects.
Issue: SPR-16430
This commit adds these 2 Vary headers in addition to the existing
Origin one to avoid caching of Access-Control-Request-Method and
Access-Control-Request-Headers headers which can be an issue
when allowed methods or headers are unbounded and only the
requested method or headers are returned in the response.
Issue: SPR-16413
From:
Thymeleaf
Groovy Markup
FreeMarker
JSP & JSTL
Script Views
XML
Tiles
XSLT
PDF, Excel
RSS, Atom
Jackson
To:
Thymeleaf
FreeMarker
Groovy Markup
Script views
JSP & JSTL
Tiles
RSS, Atom
PDF, Excel
Jackson
XML
XSLT
Also move View Technologies after MVC Config to align order with
WebFlux config.
Issue: SPR-16393
The commit brings following changes:
- Move getDecodableMimeTypes() to AbstractJackson2Decoder
- Move getEncodableMimeTypes() to AbstractJackson2Encoder
- Add support for application/stream+x-jackson-smile
- Avoid streaming line separator when Smile encoder is used
- Use double null token in Jackson2Tokenizer to identify documents
Issue: SPR-16151
The resolved URI instance is also being cached now. This should not make a difference in a real Servlet environment but does affect tests which assumed they could modify an HttpServletRequest path behind a pre-created ServletServerHttpRequest instance. Our WebSocket test base class has been revised accordingly, re-creating the ServletServerHttpRequest in such a case.
Issue: SPR-16414
This commit makes sure there is no custom Content-Disposition header
before setting one automatically.
This commit also adds a headers(Consumer<HttpHeaders>) method, so that
one can user the nicer methods of HttpHeaders, as opposed to basic
strings.
Issue: SPR-16376
Since Java7 HttpURLConnection offers setFixedLengthStreamingMode method with long parameter which should be prefered over version with int argument, therefore casting ContentLength to int is no longer needed. Moreover it makes impossible to stream payload larger than Integer.MAX_VALUE
Now that SPR-16307 makes it possible to write a part with a Publisher
we need to ensure we get the filename correctly when writing with
Publisher<Resource>.
Issue: SPR-16376
After this commit DefaultUserDestinationResolves no longer looks at
whether AntPathMatcher is configured with "." as separator and rather
expects to be explicitly told whether to keep the leading slash in
translated destinations which actually depends on what the message
broker supports (e.g. RabbitMQ "/", Artemis ".") or how it is
configured (simple broker could be either way).
There is also a minor improvement in SimpMessagingTemplate to ensure
user destinations are correctly formed based on what the
DefaultUserDestinationResolver expects. When using "." as separtor it
allows sending messages to "queue.q1" rather than "/queue.q1".
Issue: SPR-16275
The previous fix #09f1f7 did not actually address the issue but only
moved it further down, so instead of the subscribe(), it was consuming
it inside the MultipartHttpMessageWriter#write method which returned
this.body.then(), and then again for the actual request body writing.
In this commit MultipartHttpMessageWriter#write returns Mono.empty()
since we don't actually want to write the part content from there, but
only want to access it as soon as it is availabele, for writing to
the request body.
Issue: SPR-16402
This commit checks the Etag/LastModified headers on the incoming
request, and sets a 304 Not Modified status with no body when they
match, by delegating to ServerWebExchange.checkNotModified.
Issue: SPR-16348
This commit separates the creation of a response so that it is executed
after the synchronized block inside which requests need to be matched
and validated (for order and count).
This allows a ResponseCreator to be slow or block if it has to.
Issue: SPR-16319
We cover this more succinctly from other places, e.g. in Model Methods
by referring to the Javadoc of Contentions, or pointing to the
RequestToViewNameTranslator.
As of EclipseLink 2.4.0 - Juno this is not sufficient to log
SQL parameter binding. Additionally,
eclipselink.logging.parameters must be enabled.
Issue: SPR-16383
After this commit, AbstractSockJsService uses the configured allowed
origins when generating the CorsConfiguration instead of "*".
As a consequence, forbidden origin requests still result in a 403
response but now with no CORS headers in order to improve consistency
between the status code and the headers.
Issue: SPR-16304
Use DataBufferUtils.compose instead of writeAggregator to combine
multiple data buffers into one, as the write aggregator would not work
when the initial data buffer did not have enough capacity to contain
all subsequent buffers.
Removed writeAggregator, as it is no longer needed.
Issue: SPR-16365
Added a utility method that composes data buffers into a single buffer.
Depending on the `DataBuffer` implementation, the returned buffer may be
a single buffer containing all data of the provided buffers, or it may
be a true composite that contains references to the buffers.
Issue: SPR-16365
The match/matches methods of UriTemplate use a regex with (.*) in place
of URI variables, which work fine except in the end where such a
pattern can match greedily more than one segment.
This commit updates the regex to use ([^/]*) instead since URI
variables are only meant to be used within a single path segment.
Issue: SPR-16169
Clarify what PathPatternParser is used for which is CORS checks in the
very least. Some sub-classes will also use it for request mapping but
not all (e.g. RouterFunctionMapping). Hence the need to be more
explicit.
@EnableWebFlux bootstraps both annotated controllers and functional
endpoints, so we need to be more explicit about which parts of the
configuration apply to which.
Issue: SPR-16360
This commit polishes SPR-16022 fix in order to handle correctly
the case when primary and default constructors are the same when
a secondary constructor is defined.
Issue: SPR-16289
As a consequence of dropping CompositeByteBuf (see prior commit),
DataBuffers fluxes that are aggregated with Flux.reduce(BiFunction) are
now required to be released, as the composite no longer holds a
reference to subsequent data buffers.
For this purpose, DataBufferUtils now has a writeAggregator that can be
used with Flux.reduce, and that released the subsequent buffers
properly.
Issue: SPR-16351
Prior to this commit, NettyDataBuffer had a optimization in
write(ByteBuf...), where it used a CompositeByteBuf to hold the original
and the parameter buffer.
Unfortunately, this procedure has nasty consequences when splicing
buffers (see https://stackoverflow.com/a/48111196/839733).
As of this commit, NettyDataBuffer stopped using CompositeByteBuf, and
simply does ByteBuf.write().
Issue: SPR-16351
Optimize same origin check when the request is an instance of
ServletServerHttpRequest and when there is no forwarded headers.
This commit also optimizes the getPort methods and ForwardedHeaderFilter
forwarded headers checks.
Issue: SPR-16262
This commit refines forwarded protocol support in order to support
proxies that only set "X-Forwarded-Proto" header and not
"X-Forwarded-Port" by performing a reset of the port in such case.
"Forwarded" header support has been updated accordingly since it
also supports similar use case, as described in SPR-15504.
Issue: SPR-16262
Since type erasure can be fixed only when using
ParameterizedTypeReference based Java methods, RestOperations and
WebFlux API documentation should be updated to specify which extensions
are subject to type erasure, and which are not.
Issue: SPR-16273
This allows us to confirm 0.7.3 fixes and run tests against the latest
ahead of an upgrade to Reactor Netty 0.8 snapshots.
The fix for #231 and #240 are confirmed but unfortunately test case for
This commit moves the ResolvableType field from HttpEntity to
PublisherEntity, a new entity type defined in MultipartBodyBuilder.
With this change, the scope of the ResolvableType is limited to
multipart-related code, instead of becoming part of the complete
HttpEntity hierarchy.
Issue: SPR-16307
This commit adds new header assertions for `WebTestClient`.
`doesNotExist` tests that a given header is not present:
.expectHeader().doesNotExist("Cache-Control");
`contentTypeCompatibleWith` tests for MediaType compatibility:
.expectHeader().contentTypeCompatibleWith("text/*");
Issue: SPR-16285
This commit adds a ResolvableType field to HttpEntity, in order to
support Publishers as multipart data. Without the type, the
MultipartHttpMessageWriter does not know which delegate writer to use to
write the part.
Issue: SPR-16307
This commit allows CorsConfiguration#combine()
to differentiate permit default values set by
CorsConfiguration#applyPermitDefaultValues()
from values configured explicitly by the user.
Those permit default values will be overridden
by any user-provided ones while user-provided values
will be combined in an additive way, including
when "*" is specified.
Documentation has been improved accordingly.
Issue: SPR-15772
With this commit, the default content-type defined by the
view (usually "text/html;charset=UTF-8" defined in AbstractView)
is used if any, when none is defined in the response headers.
Issue: SPR-16247
This commit removes the mention that Spring Boot 2.0 includes
Jackson Kotlin module since it is not the case as of M7, and
add a note about using bean validation annotations with Kotlin.
If the response is set and we can't change the status through
ServerHttpResponse any more, allow the error signal to propagate and
let the individual server adapters handle it. Ultimately that should
result in closing the connection.
On Servlet containers, we check one last time if the response is
committed (we may not have filled the buffer). If not then save
the exception as a request attribute, dispatch, and re-throw it on the
container thread.
On Undertow access the connection and close it.
On Netty just let the error through to Reactor Netty.
Issue: SPR-16051
Provide a fully mutable HttpHeaders to ClientHttpRequestInterceptors
of a RestTemplate when headers are set using HttpEntity. This avoids
UnsupportedOperationException if both HttpEntity and
ClientHttpRequestInterceptor add values for the same HTTP header.
Issue: SPR-15066
As of Gradle Kotlin plugin 1.1.60,
project.sourceSets.main.kotlin.srcDirs contains
Java source directories in addition to Kotlin
ones. This commit filter out Java sources to
retain only Kotlin ones.
Issue: SPR-16268
This commit fixes a bug where an IllegalStateException was
thrown if the minPort and maxPort values supplied to
SocketUtils.findAvailableTcpPort(int, int) were identical.
From #9a894a we began using the content-type from the ResponseEntity
but cross-checking it still against the requested content type.
Arguably there isn't any purpose in cross-checking. The only possible
outcomes are: a) it's compatible or b) it's not, which would result in
406 (NOT_ACCEPTABLE). As we've been given explicitly the media type to
use, it makes little sense to send 406, ignoring the wish to use that
content type.
Issue: SPR-16251
The request URI returned from HttpServerRequest.uri() typically
contains contains an absolute path but could also contain an
absolute URI. This commit adds handling for the latter, effectively
taking only the absolute path portion.
Issue: SPR-16243
apiVersion and languageVersion options are set to 1.1
on production code in order to avoid incompatibilities
with Kotlin 1.1 based projects or libraries.
Issue: SPR-16239
ResponseStatusExceptionHandler lets the error through if it can't
change the status while HttpWebHandlerAdapter logs a more helpful
message (including status code) but without a full stack trace.
Issue: SPR-16231
- Add "Processing" section (also replaces Advanced Customizations)
- Add information on out-of-the-box behavior
- Add more deails on @CrossOririn default configuratio
- Add cross-references between Spring MVC and WebFlux
- Polish
1. setComplete checks the isCommitted flag to avoid an unnecessary
debug message. This method is meant to be safe to call many times.
2. setStatusCode lowers log message to TRACE, since the return value
communicates the outcome it's arguably much less critical.
3. Add comment and test case for ResponseStatusExceptionHandler.
A ResponseStatusException is clearly meant to be handled by this
handler so don't let it pass through even if the respones is
committed.
Issue: SPR-16231
Before this commit, the return value from write was interpreted as the
data being fully written and ready to be released via releaseData().
This is not true for WebSocketSession implementations where a true
return value simply means the message was sent with the full payload
but releas is not appropriate until a send confirmation.
Technically not an issue since WebSocketSession's extending this do
not use pooled buffers. Nevertheless this commit refines the semantics
of write, removes the releaseData() method, and makes sub-classes
responsible for releasing the buffer when fully written (and they
know best when that is). As a bonus currentData is now private.
Issue: SPR-16207
After this commit, Tomcat and Undertow WebSocketSession imlpementations
start out in suspended mode and wait for demand.
The JettyWebSocketSession is capable of suspending but it doesn't seem
to work if invoked before any messages are received. That may become an
issue if there is a case where no demand appears long enough for more
messages to accumulate than we can hold.
UnderowServerHttpRequest would ideally also start in suspended mode but
that also doesn't work. It is not an issue in this case since we can
ignore the read notifications.
Servlet API requires a proactive check before it calls you back so
there is no need to suspend.
Issue: SPR-16207
This commit turns suspendReading() into a readingPaused() notification
that is invoked after a succession of reads stops because there is no
more demand. Sub-classes can use this notification to suspend, if that
applies to them.
Most importantly the notification is guaranteed not to overlap with
checkOnDataAvailable() which means that suspend does not need to be
atomic and guarded against resume. The two can and do compete all the
time when reading ends with no demand, and a request for demand arrives
concurrently.
Issue: SPR-16207
Access-Control-Allow-Credentials CORS header, used to
allow cookies with CORS requests, is not set to true
anymore by default when enabling CORS with
@CrossOrigin or global CORS configuration in order to
provide a more secured default CORS configuration.
The related allowCredentials property now requires to
be set to true explicitly in order to support cookies
with CORS requests.
Issue: SPR-16130
Transition from DEMAND->NO_DEMAND:
Two concurrent threads enter DEMAND.request and DEMAND.onDataAvailable.
And DEMAND.onDataAvailable finishes before DEMAND.request to be able to
update the demand field then a request for reading will be lost.
Transition from READING->NO_DEMAND:
readAndPublish() returns false because there is no demand but before
switching the states READING.request is invoked again a request for
reading will be lost.
Changing READING->DEMAND/NO_DEMAND is made conditional so that the
operations will be executed only if changing states succeeds.
When in READING state detect completion before each next item in order
to exit sooner, if completed.
Issue: SPR-16207
- Ensure completion signal (normal/exception) will be delivered to
the subscriber when transition from UNSUBSCRIBED->COMPLETED
- According to the specification "Publisher.subscribe MUST call onSubscribe
on the provided Subscriber prior to any other signals to that Subscriber" so
ensure onComplete/onError signals will be called AFTER onSubscribe signal.
Issue: SPR-16207
This commit changes the implementation of the PathPattern
extractPathWithinPattern method that used an old AntPathMatcher
derivative to a new version that integrates more closely with
PathContainer.
It also introduces consistency in a couple of areas. The javadoc
is updated to specify this but basically:
- the response from the extra method will have all leading
and trailing separators removed.
- the response will have multiple adjacent separators within the
reponse reduced to just one. (For example response would be
aaa/bb/cc and not aaa///bbb//cc)
If your response would start or finish with multiple separators, they
are all removed.
Issue: SPR-16120
- When there is no demand for reading, the implementation
should suspend reading otherwise useless events will be
send by Undertow to the registered read listener.
- There is not need to wait for an event for reading/writing after calling
resumeReads/resumeWrites
This commit adds
AbstractMessageReaderArgumentResolver#readBody and
AbstractMessageWriterResultHandler#writeBody variants
which allow to pass the actual MethodParameter in order
to perform proper annotation-based hint resolution with
nested generics, for example with HttpEntity.
Issue: SPR-16098
Autowiring implicitely Kotlin primary constructors
when there are secondary constructors has side effects
on ConstructorResolver. It seems reasonable to
require explicit @Autowired annotation in such case.
With this commit, implicit autowiring of Kotlin
primary constructors is only performed when there
is a primary constructor defined alone or with
a default constructor (define explicitly or
generated via the kotlin-noarg compiler plugin
or via optional constructor parameters with default
values).
Issue: SPR-16022
The EXTENSION_RECEIVER parameter of Kotlin's extension
methods appear as normal method parameters to Java and
thus require a name. The synthetic name "$receiver" is
used here, as it is not a valid Kotlin identifier,
but valid in Java.
Issue: SPR-16119
This commit uses the existing CompositeByteBuf if present, as opposed
to creating a new composite for every call to
NettyDataBuffer.write(ByteBuf...)
Issue: SPR-16180
Practically no changes to RxNetty for a year and efforts underway to
rebuild 0.6.x based on a current Reactor Netty base.
Aside from the extra time to run integration tests having two
Netty-based servers can also cause false alarms such as ByteBuf leaks
related to RxNetty.
Also remove ErrorDeferredResultProcessingInterceptor which was meant
to be package private to begin with as its peer
ErrorCallableProcessingInterceptor (also removed).
Create the buffer with at least the original sql length to avoid
multiple re-allocations
Add a fast path if the original sql doesn't contain any parameters
Includes fixes for invalid exception declarations in Mockito-based unit tests. Also includes FreeMarker 2.3.27, Commons Pool 2.4.3, JSON-P 1.1.2.
Issue: SPR-16157
This commit introduces a new AbstractReactiveWebInitializer in
spring-web that relies on WebHttpHandlerBuilder to detect request
processing infrastructure beans from an ApplicationContext.
This eliminates the need to create a DispatcherHandler, since it is
expected to be a Spring bean, and as a result the initializers in
spring-webflux have been deprecated.
Issue: SPR-16144
The RFCs around basic authentication don't explicitly disallow empty
usernames. On the other hand usernames containing colons are, as colons
are used to separate the username from the password.
SimpMessageTypeMessageCondition was lenient in matching the message
type, essentially matching on any non-null message type with an exact
match given a preference only in comparing mulitple matches.
This commit modifies matching logic to look for an exact match.
Issue: SPR-16109
FromHttpMessageWriter and MultipartHttpMessageWriter both support
MultiValueMap except the former supports String values only. This
presents an issue since either full generic type information must be
provided, which is cumbersome on the client side, or if left out there
is no good way to order the writers to make a proper decision.
This commit:
- refines the canWrite behavior of to not a
accept MultiValueMap without proper generic information unless the
MediaType is explicitly set providing a strong hint.
- modifies MultipartHttpMessageWriter to be configured with a
FormHttpMessageWriter so it can write both plan and multipart data with
the ability to properly differentiate based on actual map values.
Issue: SPR-16131
This avoids "IllegalStateException: Expectations already declared" when
a MockRestServiceServer is used after one request throws an exception.
Issues: SPR-16132
This commit changes the way Undertow's PooledByteBuffers are dealt with.
Previously, these buffers where closed as soon as all data was read. As
of this commit, the UndertowServerHttpRequest returns PooledDataBuffers
from getBody(), so that the buffers are released when release() is
called.
The "Build from Source" wiki page now consolidates build-related information
and is independent from "Release" information. The former is broadly of interest
to any contributor. The later is of interest to committers.
This commit decouples ExchangeResult from knowledge about
WiretapClientHttpRequest/Response both of which are now private to
WiretapConnector.
ExchangeResult takes ClientHttpRequest/Response instead along with
promises for the serialized request and response content in the form
of MonoProcessor<byte[]>.
This sets up the possibility for an ExchangeResult to be created
outside and independent of WebTestClient, should we decide to make its
constructor public.
Issue: SPR-16101
The main way CONTRIBUTING will be viewed is on Github and the output
is just not good enough to justify using asciidoctor vs md/txt as
the recommended on the Github help page for contributing guidelines.
For example it was attractive to use a TOC and that works on Github
but doesn't look good. In the end it's a very short TOC and
maintaining manually is easy enough and it's easier to control the
look.
The guidelines were originally created several years ago. This commit
does not fundamentally change anything but rather make the guidance
more compact.
The commit consolidates into into CONTRIBUTING.adoc information from
CONTRIBUTING-DOCUMENTATION.adoc and also the wiki page "The Lifecycle
of an Issue".
Directly inlined hasLength implementations for proper nullability detection in IntelliJ, assuming a hasText checked value is never null afterwards. Since the JVM is going to do this at runtime anyway, this is effectively equivalent but more indicative for source code introspection algorithms.
Issue: SPR-15540
A new HTTP/2 support section has been added in the Spring MVC
documentation. Also, a dedicated wiki page is created for specific
container support information.
Issue: SPR-15821
This commit exposes the ClientRequest's URL and HttpMethod fields via a
setter, so that they can be changed more easily in a request that was
created via ClientRequest.from(ClientRequest).
Issue: SPR-16093
This commit introduces various improvements in DataBuffer:
- DataBuffer now exposes its read and write position, as well as its
capacity and writable byte count.
- Added DataBuffer.asByteBuffer(int, int)
- DataBufferUtils.read now reads directly into a DataBuffer, rather than
copying a ByteBuffer into a DataBuffer
- TomcatHttpHandler now reads directly into a DataBuffer
Issues: SPR-16068 SPR-16070
MockMvc now properly detects the presence of an AsyncContext and
re-uses the response instance used to start it.
This commit also includes a minor fix in
ResponseBodyEmitterReturnValueHandler to ensure it does not disable
ETag related content buffering for reactive return values that do not
result in streaming (e.g. single value or collections).
Issue: SPR-16067
Includes redeclaration of CodecConfigurer.DefaultCodecs without concrete Jackson decoder/encoder references in order to avoid hard Jackson dependency.
Issue: SPR-16064
Before this commit, when adding filters to a builder obtained via
`WebClient.mutate()`, the filters were added both to the original client
as well as the mutated builder. This commit fixes that.
Issue: SPR-16059
Prior to this commit, the `ResourceWebHandler` would itself handle the
response with an HTTP 404 in many cases, including a missing static
resource.
This does not give a chance to `WebExceptionHandler` instances to handle
that error and, for example, display an error page.
See spring-projects/spring-boot#8625
Issue: SPR-16023
Prior to this commit, the Resource `HandlerMapping` configured by
`@EnableSpringMvc` would be set up with only one custom
`HandlerInterceptor` (the one exposing the `ResourceUrlProvider` for
resolving URLs of static resources).
This behavior is not consistent with the rest of the default
configuration which leverages the interceptors configured against the
interceptor registry (with possible user-provided ones).
This change allows to register interceptors against resource handling;
this can be useful for metrics purposes, as in
spring-projects/spring-boot#10335.
Issue: SPR-16034
The Javadoc on tag classes now has all the information including a
list of all tags at the package level, HTML tables listing tag
attributes in each tag class, and class level description that is
as good or in many cases better than what was in the reference.
Issue: SPR-16045
1. Move schemas to local appendix within each top-level section.
2. Link to Javadoc for JSP tags
3. Purge Class Spring usage information
Issue: SPR-16045
The WebTestClient now takes advantage of the support for decoding
response to Void.class in WebClient so that applications can use
expectBody(Void.class) to the same effect as using
response.bodyToMono(Void.class) as documneted on WebClient#exchange.
The top-level, no-arg returnResult method (added very recently) has been
retracted, since the use of returnResult at that level, i.e. without
consuming the response content, should be used mainly for streaming.
It shouldn't be used for "no content" scenarios.
Documentation and Javadoc have been udpated accordingly.
Use the ClientResponse methods bodyToMono and bodyToFlux rather than
passing in a BodyExtractor so that WebTestclient now also benefits from
the recently improved handling of Void.class.
Before this commit those were burried in the Appendix where few would
guess to look. Previously that information was at the top, so it makes
sense to point to the Github wiki from the index HTML page.
Also a general update of the index page. Since we have recently revised
the overview, we can simply point to it and keep it shorter.
The section listing now includes more details per section.
Before this commit WebClient documentation was also included from the
Integration section where the RestTemplate is documented. That is
convenient but results in duplicate content under different URLs.
This commit removes the include from the Integration section and leaves
Concrete server and client, reactive request and response
implementations should not have to be accessed outside their package.
They could be seen as private to their HttpHandler adapters and
ClientHttpConnector's respectively.
The one exception, WebSocket upgrades in spring-webflux, is an internal
framework use case, accommodated via downcast + accessors in the
abstract base classes.
Prior to this commit, the `WebClient` always throws a `ClassCastException`
when an error occurs in `bodyToMono(ParameterizedTypeReference)``, and
not the expected exception, as set up by `onStatus`
Issue: SPR-16025
Extract WebClient content into a separate file that is now included
both in the WebFlux and in the Integration sections.
This allows having RestTemplate and WebClient documented in one place
under Integration while also keeping the same included in the WebFlux
section too.
Prior to this commit, asking for a `Void` type using any of the
`ClientResponse#bodyTo*` methods would immediately return an empty
`Publisher` without consuming the response body.
Not doing so can lead to HTTP connection pool inconsistencies and/or
memory leaks, since:
* a connection that still has a response body being written to it cannot
be properly recycled in the connection pool
* incoming `DataBuffer` might not be released
This commit detects when `Void` types are asked as body types and in
those cases does the following:
1. Subscribe to the response body `Publisher` to allow the connection to
be returned to the connection pool
2. `cancel()` the body `Publisher` if the response body is not empty; in
that case, we choose to close the connection vs. consume the whole
response body
Those changes imply that `ClientHttpResponse` and other related
contracts don't need a `close()` method anymore.
Issue: SPR-16018
Includes unified detection of Kotlin's optional parameters in MethodParameter.isOptional(), reduces BeanUtils.findPrimaryConstructor to Kotlin semantics (for reuse in AutowiredAnnotationBeanPostProcessor), and finally introduces a common KotlinDetector delegate with an isKotlinType(Class) check.
Issue: SPR-15877
Issue: SPR-16020
Prior to this issue, SPR-15920 added this new `close()` method which was
supposed to be called to clean resources after response processing.
This commit changes the meaning of that method: calling `close()` will
close the underlying HTTP connection. This has to be called if the
response body is not consumed by the application, since at that point
the underlying connection might be in an inconsistent state if shared in
a connection pool.
Issue: SPR-15993
Now that WebSessionStore is in charge of expiration checks on retrieve
it makes sense to also update the lastAccessTime on retrieve at the
same time, saving the need to call it after a retrieve.
Issue: SPR-15963
It is no longer adequate to list supported arguments and return values
-- between Web MVC and WebFlux, directly on the annotation.
Instead we have tables in the respective chapters in the reference with
cross references to each other.
Issue: SPR-15149
This commit makes Reactor Netty `WebClient` instances
support zero-copy requests by implementing `ZeroCopyHttpOutputMessage`.
The implementation leverages the optimized `sendFile` mechanism if
available.
This commit moves WebFluxUriComponentsBuilder.fromServerRequest to the
ServerRequest interface itself.
Consequently, the WebFluxUriComponentsBuilder is removes itself, as it
contained no other methods.
Issue: SPR-15953
The typical way to load DispatcherHandler is to use
WebHttpHandlerBuilder#applicationContext which also detecs filters,
exception handlers, as well as other beans that are injected into every
ServerWebExchange -- custom session manager, localecontext resolver,
codecs for form data, multipart data, etc
WebHttpHandlerBuilder is the preferred and way so removing the ones on
DispatcherHandler. They could always be added back later.
This commit introduces a visitor for router functions
(RouterFunctions.Visitor), allowing to iterate over all the components
that make up a router function.
This commit also introduces a ToStringVisitor, which creates a nicely
formatted string for use with toString().
Issue: SPR-15711, SPR-15711
Also, ChannelRegistration.setInterceptors is deprecated now: in favor of a fluently named interceptors(...) method which is documented to add the given interceptors to the channel's current list.
Issue: SPR-15962
Issue: SPR-15976
This commit makes sure that any custom MessageConverter set in a
JmsTemplate used by a JmsMessagingTemplate is reused as the payload
converter of the message.
Issue: SPR-15965
This commit introduces the WebFluxUriComponentsBuilder, with a single
method that creates a UriComponentsBuilder for a ServerRequest. More
methods to be added by @rstoyanchev.
Issue: SPR-15953
This commit introduces a methodName() method to the ServerRequest,
returning the String name of the method. This method is useful for
non-standard HTTP methods.
This commit introduces the following changes.
1) It adds a new Spring @NonNull annotation which allows to apply
@NonNullApi semantic on a specific element, like @Nullable does.
Combined with @Nullable, it allows partial null-safety support when
package granularity is too broad.
2) @Nullable and @NonNull can apply to ElementType.TYPE_USE in order
to be used on generic type arguments (SPR-15942).
3) Annotations does not apply to ElementType.TYPE_PARAMETER anymore
since it is not supported yet (applicability for such use case is
controversial and need to be discussed).
4) @NonNullApi does not apply to ElementType.FIELD anymore since in a
lot of use cases (private, protected) it is not part for the public API
+ its usage should remain opt-in. A dedicated @NonNullFields annotation
has been added in order to set fields default to non-nullable.
5) Updated Javadoc and reference documentation.
Issue: SPR-15756
When writing Publisher<Publisher<T>>, a flush operation is performed onComplete
for every Publisher. If the flush operation is not able to be performed immediately
it will be retried before starting to process data provided by the next Publisher.
For the last Publisher the implementation needs to ensure that the flush will
be performed only then whole operation will complete.
Issue: SPR-15949
This commit introduces a ForwardedHeaderFilter for WebFlux, similar to
the existing Servlet version. As part of this the
DefaultServerHttpRequestBuilder had to be changed to no longer use
delegation, but instead use a deep copy at the point of mutate().
Otherwise, headers could not be removed.
Issue: SPR-15954
This commit fixes a typo in the `DefaultWebClient` implementation.
Instead of forwarding resolved `WebClientException` instances as error
signals, the `bodyToMono(ParameterizedTypeReference)` variant would just
forward those exceptions as `onNext` signals.
Issue: SPR-15946
Prior to that commit, the `ResponseSpec` `WebClient` would process error
responses (4xx, 5xx HTTP status) and transform those into error signals
with a `WebClientResponseException`. But this would only work if the
HTTP response would have a non-empty response body.
An empty error response would not send an error signal and only
translate in an `onComplete` signal.
This commit fixes this behavior and makes sure that this error signal is
sent in all cases.
Issue: SPR-15946
Now that https://github.com/reactor/reactor-netty/issues/138 is solved,
this commit removes the temporary workaround introduced in SPR-15784
but leaves the general mechanism for detecting empty responses.
The high level matchStarting API was removed a few commits ago.
This change tidies up by removing the supporting infrastructure
for that from the PathElements.
Prior to this commit, various dependencies in the spring-test module
pulled in commons-logging as a transitive dependency. Consequently,
the presence of commons-logging in the generated Eclipse classpath
overrode the intended use of the spring-jcl module causing JUL to be
used instead of log4j for tests executed within Eclipse, thereby
ignoring the configuration in src/test/resources/log4j2-test.xml.
This commit addresses this issue by excluding commons-logging in
spring-test.gradle for all Selenium dependencies.
Issue: SPR-15930
InMemoryWebSessionStore is very closely associated to DefaultWebSession
passing it to it several fields and functions. Now that the store also
creates the session, it makes sense to bring the latter in as an inner,
nested class.
Issue: SPR-15875, 15876
DefaultWebSessionManager no longer requires the WebSessionStore
to use DefaultWebSession.
Removed explicit start() in save(). This seemed unnecessary since at
that point isStarted is guaranteed to return true. The status can
be updated through the copy constructor.
DefaultWebSessionTests added.
Issue: SPR-15875
- Add WebSessionStore.createWebSession.
- Remove remove WebSessionStore.changeSessionId
- Add WebSessionStore updateLastAccessTime which allows updating the
WebSession lastAccessTime without exposing a method on WebSession in
an implementation independent way.
- Remove WebSessionStore.storeSession. This method is not necessary
since the WebSession that is returned allows saving the WebSession.
Additionally, it is error prone since the wrong type might be passed
into it.
Issue: SPR-15875, 15876
Add missing DefaultWebSessionManagerTests .block(). Previously
session.save() was invoked, but we did not ensure it was completed.
This commit makes it block on session.save()
Fix existingSessionIsExpired. This test is actually broken and is
testing a new session is created because the session id returned
by the idResolver does not match the existing WebSession.
This commit ensures that the id of the WebSession found by idResolver
matches the existing WebSession.
DefaultWebSessionManagerTests use Mockito. To ensure we test with
independence from InMemoryWebSessionStore we use Mockito for the
DefaultWebessionManager collaborators.
Add test for response.setComplete(). We want to ensure that when the
response is completed, it saves the WebSession and writes it to the
response using idResolver
Use constant for default header name and make getHeaderName private.
Also switch HeaderWebSessionIdResolverTests to unit tests rather than
testing with DefaultWebSessionManager.
Issue: SPR-15917
Before this commit, there was no way to signal the HTTP client that we
were done consuming the response. Without that, the underlying client
library cannot know when it is safe to release the associated resources
(e.g. the HTTP connection).
This commit adds new `close()` methods on both `ClientHttpResponse`
and `ClientResponse`. This methods is non-blocking and its behavior
depends on the library, its configuration, HTTP version, etc.
At the `WebClient` level, `close()` is called automatically if we
consume the response body through the `ResponseSpec` or the
`ClientResponse` itself.
Note that it is *required* to call `close()` manually otherwise; not
doing so might create resource leaks or connection issues.
Issue: SPR-15920
This commit introduces a test that demonstrates that custom JUnit 4
rules can be @Autowired into a test instance but that they will not be
applied by JUnit since JUnit only ever sees such fields as null and
therefore ignores them.
Issue: SPR-15927
This commit moves `encodeUrl` and `registerUrlEncoder` from
ServerHttpResponse to ServerWebExchange.
It also renames `encodeUrl` to `transformUrl` and `registerUrlEncoder`
to `addUrlTransformer` to make it clearer that these methods do not
perform actual URL encodings (i.e. they do not replaceinvalid
characters).
The `add` prefix (instead of `register`) makes it clearer that each
function is added in addition to the previous one.
Issue: SPR-15924
Introduces HeaderSessionIdResolver, which reads session ids from a session header and generates a session response header when new session are created.
Related issue: SPR-15917
`ReactorClientHttpConnector` provides an adapter layer to `WebClient`
for using Reactor-Netty's `HttpClient`.
This commit enables HTTP compression support by default for this client
Connector.
Another constructor is still available for providing a custom
`HttpOptions` configuration.
Issue: SPR-15908
Prior to this commit, HTTP Range requests were only supported by the
ResourceHttpRequestHandler when serving static resources.
This commit improves the `HttpEntityMethodProcessor` and
the `RequestResponseBodyMethodProcessor`. They now extract
`ResourceRegion`s from the `Resource` instance returned by the
Controller and let the Resource-related message converters
handle the writing of the resource (including partial writes).
Controller methods can now handle Range requests for
return types that extend Resource or HttpEntity:
@RequestMapping("/example/video.mp4")
public Resource handler() { }
@RequestMapping("/example/video.mp4")
public HttpEntity<Resource> handler() { }
Issue: SPR-15789, SPR-13834
This change allows much more usable TOC for the reactive
stack and will make WebFlux documentation easier to
contribute thanks to a clearer split between both stacks.
Issue: SPR-15149
The upgrade to Gradle 4.0 broke the custom Eclipse support in the
Spring Framework build.
This commit includes the following changes which re-enable support for
Eclipse in the build.
- Switched to ProjectDependency(String) constructor
- Updated regular expression that matches against project output
dependencies to include more than one subdirectory between "build"
and "main"|"test".
Issue: SPR-15862
This commit adds support for autowired constructor parameters
on Kotlin classes with optional parameters. If some constructor
parameters are not available, optional parameter default values
will be used instead. Both explicit @Autowired annotated constructor
and implicit single constructor automatically autowired are supported.
Issue: SPR-15847
This commit reinstates the Spring Framework BOM, which was previously
empty because of a previous change in 41cbc4670f.
This change also removes the JSR305 dependency from the BOM, which does
not belong here since it is not an artifact produced by Spring.
Issue: SPR-15885
This commit ensures that only the HTML version of the reference
documentation is rendered for SNAPSHOT builds. This speeds up
significatly the build.
Issue: SPR-15885
As of Gradle 4.0, project SourceSets can have multiple output
directories (one per programming language).
This commit fixes warnings that are logged when a single output dir
is considered by tasks.
Issue: SPR-15885
This commit applies the Dependency Management Plugin to modules that
require it; right now Spring Framework is importing BOMs for Netty and
Reactor dependencies only.
Instead of applying those BOMs to all modules, they're applied only
where they're needed.
Issue: SPR-15885
The main `build.gradle` file contains now only the common build
infrastructure; all module-specific build configurations have
been moved to their own build file.
Issue: SPR-15885
This commit merges back the "spring-beans-groovy" module into the main
"spring-beans" one. The build is configured so:
* Java and Groovy sources are jointly compiled
* Kotlin sources are compiled after
With this change, the `MergePlugin` is not used anymore in the project
build and therefore is removed.
The `DetectSplitPackagesPlugin` wasn't applied so it's been removed as
well.
Issue: SPR-15885
With this change, each subproject can configure its
build in a dedicated file like:
```
spring-core/spring-core.gradle
spring-web/spring-web.gradle
```
Issue: SPR-15885
This commit configures Gradle build scans for the Spring Framework
build. Scans aren't performed for every build but can be enabled
with the following:
```
./gradlew build --scan
```
Issue: SPR-15885
Includes general streamlining of dependency declarations with reduced version variables, direct use of EclipseLink 2.7 and its implicit JPA 2.2 dependency in spring-orm, mixed use of Hibernate 5.2.10 and 5.1.10 for integration tests, as well as an upgrade to Jetty 9.4.7 RC0 and a downgrade to Groovy 2.4.12 (since Groovy 2.5 won't be final in time for Spring Framework 5.0).
Issue: SPR-15879
Issue: SPR-15880
Bean-derived null values may still get passed into bean properties and injection points but only if those are declared as non-required. Note that getBean will never return null; a manual bean.equals(null) / "null".equals(bean.toString()) check identifies expected null values now. This will only ever happen with custom FactoryBeans or factory methods returning null - and since all common cases are handled by autowiring or bean property values in bean definitions, there should be no need to ever manually check for such a null value received from getBean.
Issue: SPR-15829
Refer to both Servlet and reactive stacks in web.adoc
Move web-integration.adoc to the very end
Link in web-flux-functional.adoc
Insert "Spring Web MVC" or "Servlet" prefix in chapter titles
Issue: SPR-15149
This commit restores and existing redirectedUrl and forwardedUrl
methods (simple String comparison) and creates separate
redirectedUrlTemplate and forwardedUrlTemplate methods that expand
and also encode before comparing.
Issue: SPR-15834
This commit revises the implementation of the SpringExtension to use
the getRequired*() methods in the ExtensionContext which are now built
into JUnit Jupiter thanks to inspiration from the initial "convenience"
methods implemented here.
The PathPattern compareTo method is now consistent with equals when
two patterns are of the same specificity but otherwise different.
Separately PathPattern now exposes a Comparator by specificity that
offers the current functionality of compareTo. This can be used for
actual sorting where we only care about specificity.
Consistent behavior with matches(PathContainer), the two had slightly
different logic for handling of empty paths.
Make matchAndExtract independantly usable without the need to call
matches(PathContainer) first. Essentially no longer raising ISE if the
pattern doesn't match but simply returning null.
Rename getPathRemaining to matchStartOfPath since the method does
match and to be more clear about what the method and the return value
intuitively follows.
Remove matchStart which matches the start of the pattern (rather than
the start of the path). It is a use case that does not come up in
request mapping.
This commit changes the WebClient so that it now throws a
`WebClientResponseException` for `ResponseSpec.bodyTo`. This newly
introduces exception contains the status code, headers, and body of the
response message.
As a consequence of the above, we had to change `onStatus` so that the
`exceptionFunction` now returns a `Mono<Throwable>` rather than a
`Throwable`, which it was before. The Mono allows for asynchronous
operations, such as reading the contents of the body.
Issue: SPR-15824
Remove the separator constructor argument (but preserve internal
functionality) now that PathPatternParser is more explicitly purposed
for URL paths and in any case the use of an alternate separator would
also requires a similar input option on the PathContainer parsing side.
Re-arrange the checks so that if there is no form parameter, then
immediately and unconditionally delegate to super.getParameterValues().
Or reversely if there is no super.getParameterValues() then return the
form parameter.
So the only remaining case is when combining values present in both.
In that case we'll take both only if a queryString exists.
One extra fix is to not even wrap the request if we did not parse any
form parameters at all which can happen with HttpHiddenMethodFilter.
Issue: SPR-15828, 15835
Removed superfluous `fromServerSentEvent` variants from `BodyInserters`,
as their functionality can also be obtained by passing a stream of
strings or POJOs (to be encoded as JSON) to
`fromPublisher(Publisher, Class)}`, and specifying a `text/event-stream`
Content-Type.
Issue: SPR-15826
This commit also removes WebFlux non-extension functions in favor of
regular Kotlin extensions leveraging ParameterizedTypeReference parameter.
Issue: SPR-15818
This commit changes the usage of two separate attributes (username and
password) into one: a single `Credentials` object.
Additionally, the attributes key under which the credentials are stored
is changed to be specific to Basic Authentication, in order to allow for
other sorts of authentication later.
Issue: SPR-15764
This commit changes adds overloaded `ParameterizedTypeReference `
variants to body-related methods in `ServerRequest` and
`ServerResponse`.
It also adds a single PTR variant to ClientRequest, which was missing
before.
Issue: SPR-15817
This commit changes all consumers of CodecConfigurer to consume a `List`
of HttpMessageReaders or HttpMessageWriters instead of consuming the
Server- or ClientCodecConfigurer directly.
Issue: SPR-15816
By using function literals with receiver, we can avoid requiring
lambda parameters for a shorter and nicer syntax. Based on a
proposal from Joseph Taylor.
Issue: SPR-15815
When the input stream is a JSON array the tokenizer skips over the
start and end array tokens in order to decode into an array of
top-level objects. However in this mode it also skips over nested
start and end array tokens which prevents proper parsing of JSR-310
dates (represented with an array syntax) as well as any fields that
are collections.
Issue: SPR-15803
The method was orginally added under SPR-14547 but the example in it
was probably intended for use with Content-Disposition server response
header (file dowonload) and not for a Content-Disposition header
within the body of a multipart request.
In a Spring application a multipart request is typically serialized
by the FormHttpMessageConverter and hence the Content-Disposition is
not explicitly set by the application.
Issue: SPR-15205
This commit parses the "Host" HTTP request header as an
`InetSocketAddress`, while supporting IPv6 addresses like `[::1]`.
This host string contains `:` chars even though it has no port
information.
Issue: SPR-15799
StandardMultipartHttpServletRequest now properly decodes RFC-5987
encoded filenames (i.e. filename*) by delegating to ContentDisposition
and also support RFC-2047 syntax through javax.mail MimeUtility.
Issue: SPR-15205
This commit updates BeanUtils class in order to add Kotlin optional
parameters with default values support to the immutable data classes
support introduced by SPR-15199.
Issue: SPR-15673
Prior to this commit, the host+port information of the incoming request
where taken from the remoteAddress, which is actually the socket address
of the HTTP client (i.e. not the server).
This commit resolves this information from the "Host" HTTP request
header, if available, or the actual local address of the channel if no
header is available.
Issue: SPR-15084
Add an option for ForwardedHeaderFilter to only process the
HttpServletRequest. This means that HttpServletResponse.sendRedirect will
only work when the application is conifgured to use relative redirects
using Servlet Container specific setup.
Issue: SPR-15717
This commit ensure that null-safety is consistent between
getters and setters in order to be able to provide beans
with properties with a common type when type safety is
taken in account like with Kotlin.
It also add a few missing property level @Nullable
annotations.
Issue: SPR-15792
Since there is no reason for an exchange to ever complete without a
ClientResponse I've added a switchIfEmpty check at the WebClient level.
Also, temporarily a second check closer to the problem in the
ReactorClientHttpConnector suggesting a workaround and providing a
reference to the Reactor Netty issue #138.
Issue: SPR-15784
Collapse the base interface VersionPathStrategy into its extension
VersionStrategy and then turn the prefix nad fliename based
implementations into abstract base classes (vs delegate strategies).
It is simpler to have one VersionStrategy hierarchy vs that plus a
separate VersionPathStrategy as a delegate. In practice each
VersionStrategy is suited to be prefix or filename based. Also none
of our code cares about the distinction between those two interfaces.
Since `PathPattern.combine` now returns another `PathPattern` instance
(it was previously returning a String instance), we can now safely
remove the parser instance included in `PatternsRequestCondition`.
Issue: SPR-15663
Currently ResourceEncoder and ResourceRegionEncoder use DataBufferUtils
to read resource with an AsynchronousFileChannel if it is a file or
otherwise fallback on getting the channel from the resource.
The same is now required in other places where a Resource needs to be
read and is also generally useful.
Issue: SPR-15773
Use copy constructor to refresh a session with lastAccessTime and a
save function referencing the current exchange. As a result both fields
are now final and ConfigurableWebSession is no longer needed.
This commit changes the write methods to return `Flux<DataBuffer>`
instead of `Mono<Void>`, giving access to the original buffers,
so that they can decided whether the buffers need to be closed or not.
Issue: SPR-15726
This commit adds an overloaded write method to `DataBufferUtils`. There
are three parameter variants: `OutputStream`, `WritableByteChannel`, and
`AsynchronousFileChannel`.
Issue: SPR-15726
This commit introduces overloaded variants of `bodytoMono`,
`bodyToFlux`, `toEntity`, and `toEntityList` that take a
`ParameterizedTypeReference`. It also adds similar methods to
`WebClient.ResponseSpec`.
Issue: SPR-15725
This binary format more efficient than JSON should be useful for server
to server communication, for example in micro-services use cases.
Issue: SPR-15424
Avoid re-using the WriteBarrier as the Subscription to both the
completionSubscriber and the writeSubscriber.
Instead DownstreamBridge is now called WriteCompletionBarrier and is
both a Subscriber and Subscription, i.e. handles all signals to and
from the completion Subscriber.
This frees the request method implementation in WriteBarrier to assume
it can only be called by the writeSubscriber and hence it's safe to
pass on request signals to the write source outside the synchronized
block.
This commit introduces a boolean `readOnly` flag in `HttpHeaders`,
which is used to check if creating a new `HttpHeaders` instance is
necessary in `readOnlyHttpHeaders`.
As a follow-up of the ApplicationContext Kotlin extensions, close to
the Kotlin functional WebFlux DSL and partially inspired of the
Groovy/Scala bean configuration DSL, this commit introduces a
lightweight Kotlin DSL for functional bean declaration.
It allows declaring beans as following:
beans {
bean<Foo>()
profile("bar") {
bean<Bar>("bar", scope = Scope.PROTOTYPE)
}
environment({ it.activeProfiles.contains("baz") }) {
bean { Baz(it.ref()) }
bean { Baz(it.ref("bar")) }
}
}
Advantages compared to Regular ApplicationContext API are:
- No exposure of low-level ApplicationContext API
- Focused DSL easier to read, but also easier to write with a fewer
entries in the auto-complete
- Declarative syntax instead of functions with verbs like registerBeans
while still allowing programmatic registration of beans if needed
- Such DSL is idiomatic in Kotlin
- No need to have an ApplicationContext instance to write how you
register your beans since beans { } DSL is conceptually a
Consumer<GenericApplicationContext>
This DSL effectively replaces ApplicationContext Kotlin extensions as
the recommended way to register beans in a functional way with Kotlin.
Issue: SPR-15755
This commit introduces an apply method to `WebClient.Builder`, allowing
users to make multiple changes to the builder in one consumer.
Issue: SPR-15743
The failures look like older failures possibly exposed by recent
changes in Reactor.
The one in ViewResolutionResultHandler is very old test error.
The one in Jackson2JsonDecoderTests is more recent but went unreported.
WriteBarrier acts as Subscription to both completionSubscriber and
writeSubscriber so the request method needs to be careful not to
pass on the request outside of readyToWrite or writeSubscriber checks.
ContentNegotiationManagerFactoryBean now provides an option to
explicitly set the strategies to use vs customizing a fixed
list of default strategies.
Issue: SPR-11114
This commit moves `toEntity(Class<T>)` and `toEntityList(Class<T>)`
from WebClient.ResponseSpec to ClientResponse. The main reason for doing
so is that the newly introduced `onStatus` method (see
2f9bd6e075) does not apply to these two
methods, and the result would be confusing. Also, `ClientResponse` and
`ResponseEntity` represent the same data: status code, headers, and a
body.
Issue: SPR-15724
This commit introduces a way to customize the WebClientExceptions, as
thrown by WebClient.ResponseSpec.bodyTo[Mono|Flux]. The first
customization will override the defaults, additional customizations are
simply tried in order.
Issue: SPR-15724
This commit changes `ServerRequest.attribute(String)`` to return
`Optional<Object>` instead of `Optional<T>`, where `T` was infered
from a type parameter.
Segment.value() now returns the actual original path segment value
including path parameters while semicolonContent() is removed.
valueDecoded() is renamed to valueToMatch() to reflect it is the value
for pattern matching which is not only decoded but also has path
parameters removed.
This commit makes the `uri` step of the WebTestClient optional, so that
users who have specified a base URL during WebClient config do not need
to provide an empty one (i.e. `url("")`).
Issue: SPR-15695
This commit makes the `uri` step of the WebClient optional, so that
users who have specified a base URL during WebClient config do not need
to provide an empty one (i.e. `url("")`).
The basic idea of this fix is that the HTTP method methods in WebClient
(`get`, `post`, etc.) should be able to "bypass" the uri stage, and skip
straight to defining headers, or even doing an exchange or retrieve
(i.e. call methods on `RequestHeaderSpec` or `RequestBodySpec`).
I have accomplished this by adding two new composed interfaces:
`RequestHeadersUriSpec` and `RequestBodyUriSpec`.
`RequestHeadersUriSpec` extends from the existing `UriSpec` and
`RequestHeaderSpec`, while `RequestBodyUriSpec` extends from `UriSpec`
and `RequestBodySpec`. These types are returned from the HTTP methods
(`get`, `post` etc). The `uri` methods on these types return a plain
`RequestHeaderSpec` and `RequestBodySpec` (i.e. types without the `uri`
methods), so that you can call `uri` once only.
Issue: SPR-15695
This commit introduces integration tests which verify that the
SpringExtension can be used in conjunction with JUnit Jupiter's
@ParameterizedTest support.
Explicitly pass the client-side JSR-356 WebSocketContainer to the
TomcatWebSocketClient to prevent the ContainerProvider from finding
the one from undertow-websockets-jsr through the ServiceLoader API.
This commit disables the "failOnServerError" feature on the
`HttpClientRequest`, as wrapped by ReactorClientHttpRequest. 5xx errors
are supposed to be dealt with in the WebClient, not in the lower-level
components.
Issue: SPR-15739
This commit introduces client-side request attributes, similar to those
found on the server-side. The attributes can be used, for instance, for
passing on request-specific information to a globally registered
ExchangeFilterFunction.
The client request builder, as well as WebClient.RequestHeadersSpec and
WebTestClient.RequestHeaderSpec, add methods for adding a single
attribute, as well as manipulating the entire attributes map.
The client request itself adds a accessor for the (immutable) attributes
map.
This commit also introduces a new variant of the basic authentication
filter in ExchangeFilterFunctions. This variant takes the username and
password from well-known attributes.
Issue: SPR-15691
Previously `UrlBasedCorsConfigurationSource` was relying on
`PathMatcher` implementations for matching incoming request lookup paths
with the configured path patterns for CORS configuration.
This commit replaces the use of `PathMatcher` with a `PathPatternParser`
that parses the string patterns into `PathPattenr` instances and allows
for faster matching against lookup paths.
Issue: SPR-15688
Note that WebFlux and WebFlux.fn can be both used at the same time
thanks to the handler mapping registration in `@EnableWebFlux`.
Fixing typos in the reference documentation for outdated Reactor
operators.
This commit changes ServerRequest.queryParams from returning a
List<String> given a String name, to returning a
MultiValueMap<String, String>, which gives more flexibility.
This commit uses the newly introduced `PathContainer` and `RequestPath`
support in the functional web framework. It exposes the path container
as property in `ServerRequest`, and uses that in the path-based
`RequestPredicates`.
Direct comparison of a pattern (as a String) to the path does not make
much sense now that we deal with URL encoding through PathContainer
which exposes (safely) decoded path segments.
Removing the PathPatternComparator also means we can keep patterns
pre-sorted instead of sorting them all the time. That probably offsets
any benefits from comparing to the lookup path for direct matches and
patterns are still sorted according to specificity.
The new PathContainer represent the path as a series of elements
including separators. This naturally represents leading/trailing
slashes and empty path segments which in turn makes it easier to match
in PathPattern as well as to reconstruct the path.
This commits extends nullability declarations to the field level, formalizing the interaction between methods and their underlying fields and therefore avoiding any nullability mismatch.
Issue: SPR-15720
This commit changes the release of data buffers from a finally block
into a `doFinally()` lambda on the returned `Flux<XMLEvent>` stream.
Issue: SPR-15707
This commit introduces the Jackson2Tokenizer as a replacement for the
JsonObjectDecoder. The latter was dropped because of its complexity, and
hard dependency on Netty's ByteBuf.
The new Jackson2Tokenizer leverages the new non-blocking JSON parser,
using it to parse the incoming data buffers into TokenBuffers, each
token buffer representing one JSON object. As with JsonObjectDecoder,
it also supports streaming individual JSON array elements.
Issue: SPR-14528
The cloneBuilder helps to avoid the issue in the comment of the ticket.
Rather than creating the WebClient to then obtain a fresh builder which
causes connector instantiation, we now use the cloneBuilder
Issue: SPR-15674
This commit adds a new `cloneBuilder()` method on `WebClient.Builder`;
we can now reuse the customizations of an existing builder without
sharing its state across several `WebClient` building code paths.
Issue: SPR-15690
This commit introduces 2 new public methods in HttpHeaders in order
to leverage Java 8 ZonedDateTime in addition to the existing long
(with GMT time zone implied) variants:
- ZonedDateTime getFirstZonedDateTime(String headerName)
- void setZonedDateTime(String headerName, ZonedDateTime date)
This commit also leverages Java 8 thread-safe DateTimeFormatter for
HttpHeader implementation instead of SimpleDateFormat. As a consequence
of the usage of DateTimeFormatter.RFC_1123_DATE_TIME, HTTP date header
serialization could change slightly for single digit days from for
example "Thu, 01 Jan 1970 00:00:00 GMT" to
"Thu, 1 Jan 1970 00:00:00 GMT".
Issue: SPR-15661
This new WebFilter implementation is designed to allow initial
CORS support when using WebFlux functional API. More high-level
API may be introduced later.
Issue: SPR-15567
This commit adds support for Void response body types in the WebClient,
both when using `exchange` with a response.bodyToMono(Void.class), as
well as using `retrieve` with `toEntity(Void.class)`.
Issue: SPR-15679
This commit replaces the WebClient.filter method with
WebClient.Builder.filter. The reason for this change is that filters
added via WebClient.filter would be applied in the opposite order of
their declaration, due to the compositional nature of the method,
combined with the immutable nature of the WebClient.
WebClient.Builder.filter does keep the order of the filters, as
registered.
Furthermore, this commit introduces a WebClient.mutate() method,
returning a WebClient.Builder. This method allow to add/remove filters
and other defaults from a given WebClient.
Issue: SPR-15657
Add WebClient.Builder.addFilter
Add Consumer-based headers and cookies methods to builders.
Add WebClient.mutate
This commit changes the `ExchangeStrategies` and `HandlerStrategies`
interfaces to consistently use the `CodecConfigurer` (and
sub-interfaces) for configuring codecs on the server and on the client.
Issue: SPR-15682
Supporting ScriptEngine#eval(String, Bindings) when no render function
is specified allows to support use cases where script templates are
simply evaluating a script expression with an even more simplified
configuration.
This improvement also makes it possible to use script engines that
do not implement Invocable.
Issue: SPR-15115
Static parse methods on PathSegmentContainer and PathSegment plus:
isEmpty() on PathSegmentContainer and PathSegment
isAbsolute() and hasTrailingSlash() on PathSegmentContainer
char[] alternative for valueDecoded() on PathSegment
_Have something you'd like to contribute to the framework? We welcome pull
requests but ask that you carefully read this document first to understand how
best to submit them; what kind of changes are likely to be accepted; and what
to expect from the Spring team when evaluating your submission._
# Contributing to the Spring Framework
_Please refer back to this document as a checklist before issuing any pull
request; this will save time for everyone!_
First off, thank you for taking the time to contribute! :+1: :tada:
## Code of Conduct
This project adheres to the Contributor Covenant [code of conduct](CODE_OF_CONDUCT.adoc).
By participating, you are expected to uphold this code. Please report unacceptable behavior to spring-code-of-conduct@pivotal.io.
### Table of Contents
## Take Your First Steps
* [Code of Conduct](#code-of-conduct)
* [How to Contribute](#how-to-contribute)
* [Discuss](#discuss)
* [Create a Ticket](#create-a-ticket)
* [Ticket Lifecycle](#ticket-lifecycle)
* [Submit a Pull Request](#submit-a-pull-request)
* [Build from Source](#build-from-source)
* [Source Code Style](#source-code-style)
* [Reference Docs](#reference-docs)
### Understand the basics
### Code of Conduct
Not sure what a pull request is, or how to submit one? Take a look at GitHub's
excellent [help documentation][] first.
This project is governed by the [Spring Code of Conduct](CODE_OF_CONDUCT.adoc).
By participating you are expected to uphold this code.
Please report unacceptable behavior to spring-code-of-conduct@pivotal.io.
### Search Stack Overflow first; discuss if necessary
### How to Contribute
If you're unsure why something isn't working or wondering if there is a better
way of doing it please check on Stack Overflow first and if necessary start
a discussion. This is the official list of
[Spring project tags](https://spring.io/questions). In short the issue tracker
should be used to report issues and make feature requests.
#### Discuss
### Search JIRA; create an issue if necessary
If you have a question, check StackOverflow using
[this list of tags](https://spring.io/questions), organized by Spring project.
Find an existing discussion or start a new one if necessary.
Is there already an issue that addresses your concern? Do a bit of searching
in our [JIRA issue tracker][] to see if you can find something similar. If you
do not find something similar, please create a new JIRA issue before submitting
a pull request unless the change is truly trivial -- for example: typo fixes,
removing compiler warnings, etc.
If you suspect an issue, perform a searchin the
[JIRA issue tracker](https://jira.spring.io/browse/SPR), using a few different keywords.
When you find related issues and discussions, prior or current, it helps you to learn and
it helps us to make a decision.
### Sign the Contributor License Agreement (CLA)
#### Create a Ticket
If you have not previously done so, please sign the [Contributor License Agreement][].
If you forget to do so, you'll be reminded when you submit a pull request.
Reporting an issue or making a feature request is a great way to contribute. Your feedback
and the conversations that result from it provide a continuous flow of ideas.
## Create a Branch
Before you create a ticket, please take the time to [research first](#discuss).
### Branch from `master`
If creating a ticket after a discussion on StackOverflow, please provide a self-sufficient description in the ticket, independent of the details on StackOverview. We understand this is extra work but the issue tracker is an important place of record for design discussions and decisions that can often be referenced long after the fix version, for example to revisit decisions, to understand the origin of a feature, and so on.
Master currently represents work toward Spring Framework 5.0. Please submit
all pull requests there, even bug fixes and minor improvements. Backports to
`4.3.x` will be considered on a case-by-case basis.
When ready create a ticket in the [JIRA issue tracker](https://jira.spring.io/browse/SPR).
#### Ticket Lifecycle
### Use short branch names
When an issue is first created, it may not be assigned and will not have a fix version.
Within a day or two, the issue is assigned to a specific committer and the target
version is set to "Waiting for Triage". The committer will then review the issue, ask for
further information if needed, and based on the findings, the issue is either assigned a fix
version or rejected.
Branches used when submitting pull requests should preferably be named
according to JIRA issues, e.g. 'SPR-1234'. Otherwise, use succinct, lower-case,
dash (-) delimited names, such as 'fix-warnings', 'fix-typo', etc. In
[fork-and-edit][] cases, the GitHub default 'patch-1' is fine as well. This is
important, because branch names show up in the merge commits that result from
accepting pull requests and should be as expressive and concise as possible.
When a fix is ready, the issue is marked "Resolved" and may still be re-opened. Once a fix
is released, the issue is permanently "Closed". If necessary, you will need to create a new,
related ticket with a fresh description.
## Use Spring Framework Code Style
#### Submit a Pull Request
The complete [Spring Framework Code Style][] reference is available on the wiki, but
here's a quick summary:
You can contribute a source code change by submitting a pull request.
### Mind the whitespace
1. If you have not previously done so, please sign the
[Contributor License Agreement](https://cla.pivotal.io/sign/spring). You will also be reminded
automatically when you submit a pull request.
Please carefully follow the whitespace and formatting conventions already
present in the framework.
1. For all but the most trivial of contributions, please [create a ticket](#create-a-ticket).
The purpose of the ticket is to understand and discuss the underlying issue or feature.
We use the JIRA issue tracker as the preferred place of record for conversations and
conclusions. In that sense discussions directly under a PR are more implementation detail
oriented and transient in nature.
1.Tabs, not spaces
1. Unix (LF), not DOS (CRLF) line endings
1. Eliminate all trailing whitespace
1. Wrap Javadoc at 90 characters
1. Aim to wrap code at 90 characters, but favor readability over wrapping
1. Preserve existing formatting; i.e. do not reformat code for its own sake
1. Search the codebase using `git grep` and other tools to discover common
naming conventions, etc.
1. UTF-8 encoding for Java sources
1.Always check out the `master` branch and submit pull requests against it
(for target version see [settings.gradle](settings.gradle)).
Backports to prior versions will be considered on a case-by-case basis and reflected as
the fix version in the issue tracker.
1. Use short branch names, preferably based on the JIRA issue (e.g. `SPR-1234`), or
otherwise using succinct, lower-case, dash (-) delimited names, such as `fix-warnings`.
### Add Apache license header to all new classes
1. Choose the granularity of your commits consciously and squash commits that represent
multiple edits or corrections of the same logical change. See
[Rewriting History section of Pro Git](http://git-scm.com/book/en/Git-Tools-Rewriting-History)
for an overview of streamlining commit history.
```java
/*
* Copyright 2002-2017 the original author or authors.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
1. Format commit messages using 55 characters for the subject line, 72 lines for the
description, followed by related issues, e.g. `Issues: SPR-1234, SPR-1235`.
See the
[Commit Guidelines section of Pro Git](http://git-scm.com/book/en/Distributed-Git-Contributing-to-a-Project#Commit-Guidelines)
for best practices around commit messages and use `git log` to see some examples.
package...;
```
1. List the JIRA issue number in the PR description.
### Update Apache license header in modified files as necessary
If accepted, your contribution may be heavily modified as needed prior to merging.
You will likely retain author attribution for your Git commits granted that the bulk of
your changes remain intact. You may also be asked to rework the submission.
Always check the date range in the license header. For example, if you've
modified a file in 2017 whose header still reads:
If asked to make corrections, simply push the changes against the same branch, and your
pull request will be updated. In other words, you do not need to create a new pull request
when asked to make changes.
```java
/*
*Copyright2002-2011theoriginalauthororauthors.
```
### Build from Source
Then be sure to update it to 2017 accordingly:
See the [Build from Source](https://github.com/spring-projects/spring-framework/wiki/Build-from-Source)
wiki page for instructions on how to check out, build, and import the Spring Framework
source code into your IDE.
```java
/*
*Copyright2002-2017theoriginalauthororauthors.
```
### Source Code Style
### Use @since tags for newly-added public API types and methods
The wiki pages
[Code Style](https://github.com/spring-projects/spring-framework/wiki/Code-Style) and
[IntelliJ IDEA Editor Settings](https://github.com/spring-projects/spring-framework/wiki/IntelliJ-IDEA-Editor-Settings)
defines the source file coding standards we use along with some IDEA editor settings we customize.
For example:
### Reference Docs
```java
/**
* ...
*
* @author First Last
* @since 5.0
* @see ...
*/
```
The reference documentation is in the [src/docs/asciidoc](src/docs/asciidoc) directory and, in
[Asciidoctor](http://asciidoctor.org/) format. For trivial changes, you may be able to browse,
edit source files, and submit directly from Github.
## Prepare Your Commit
When making changes locally, use `./gradlew asciidoctor` and then browse the result under
`build/asciidoc/html5/index.html`.
### Submit JUnit test cases for all behavior changes
Search the codebase to find related tests and add additional `@Test` methods
as appropriate. It is also acceptable to submit test cases on a per JIRA issue
basis, for example:
```java
packageorg.springframework.beans.factory.support;
/**
* Unit tests for SPR-8954, in which a custom {@link InstantiationAwareBeanPostProcessor}
* forces the predicted type of a FactoryBean, effectively preventing retrieval of the
* bean from calls to #getBeansOfType(FactoryBean.class). The implementation of
* {@link AbstractBeanFactory#isFactoryBean(String, RootBeanDefinition)} now ensures
* that not only the predicted bean type is considered, but also the original bean
* definition's beanClass.
*
* @author Chris Beams
*/
publicclassSpr8954Tests{
@Test
publicvoidcornerSpr8954(){
// ...
}
}
```
### Squash commits
Use `git rebase --interactive --autosquash`, `git add --patch`, and other tools
to "squash" multiple commits into a single atomic commit. In addition to the man
pages for git, there are many resources online to help you understand how these
tools work. The [Rewriting History section of Pro Git][] provides a good overview.
### Use real name in git commits
Please configure git to use your real first and last name for any commits you
intend to submit as pull requests. For example, this is not acceptable:
Author: Nickname <user@mail.com>
Rather, please include your first and last name, properly capitalized, as
submitted against the Spring Individual Contributor License Agreement (ICLA):
Author: First Last <user@mail.com>
This helps ensure traceability against the ICLA and also goes a long way to
ensuring useful output from tools like `git shortlog` and others.
You can configure this via the account admin area in GitHub (useful for
fork-and-edit cases); _globally_ on your machine with
git config --global user.name "First Last"
git config --global user.email user@mail.com
or _locally_ for the `spring-framework` repository only by omitting the
'--global' flag:
cd spring-framework
git config user.name "First Last"
git config user.email user@mail.com
### Format commit messages
Please read and follow the [Commit Guidelines section of Pro Git][].
Most importantly, please format your commit messages in the following way
(adapted from the commit template in the link above):
Short (50 chars or less) summary of changes
More detailed explanatory text, if necessary. Wrap it to about 72
characters or so. In some contexts, the first line is treated as the
subject of an email and the rest of the text as the body. The blank
line separating the summary from the body is critical (unless you omit
the body entirely); tools like rebase can get confused if you run the
two together.
Further paragraphs come after blank lines.
- Bullet points are okay, too
- Typically a hyphen or asterisk is used for the bullet, preceded by a
single space, with blank lines in between, but conventions vary here
Issue: SPR-1234, SPR-1235
1. Use imperative statements in the subject line, e.g. "Fix broken Javadoc link".
1. Begin the subject line with a capitalized verb, e.g. "Add, Prune, Fix,
Introduce, Avoid, etc."
1. Do not end the subject line with a period.
1. Restrict the subject line to 50 characters or less if possible.
1. Wrap lines in the body at 72 characters or less.
1. Mention associated JIRA issue(s) at the end of the commit comment, prefixed
with "Issue: " as above.
1. In the body of the commit message, explain how things worked before this
commit, what has changed, and how things work now.
For examples of this style, issue a `git log --author=cbeams` in the
`spring-framework` git repository. For convenience, here are several such commits:
// Replace classpath entries with project dependencies (GRADLE-1116)
// http://issues.gradle.org/browse/GRADLE-1116
eclipse.classpath.file.whenMerged{classpath->
defregexp=/.*?\/([^\/]+)\/build\/[^\/]+\/(?:main|test)/// only match those that end in main or test (avoids removing necessary entries like build/classes/jaxb)
defregexp=/.*?\/([^\/]+)\/build\/([^\/]+\/)+(?:main|test)/// only match those that end in main or test (avoids removing necessary entries like build/classes/jaxb)
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Spring Buildmaster