This commit introduces tests for the status quo as of Spring Framework
5.1.x (before the introduction of the MergedAnnotations API in 5.2).
Specifically, this commit introduces tests for the following use cases.
- declared annotation type cannot be loaded
- class referenced via annotation attribute cannot be loaded
- nested annotation referenced via annotation attribute cannot be loaded
- enum referenced via annotation attribute cannot be loaded
The first two use cases above are also tested with merged annotation
support for a custom composed annotation.
Note: this commit does not include tests for annotation attribute
arrays of classes, annotations, or enums.
See gh-27772
With this commit, bean definition profiles declared via @ActiveProfiles
are once again stored in registration order, in order to support use
cases in Spring Boot and other frameworks that depend on the
registration order.
This effectively reverts the changes made in conjunction with gh-25973.
Closes gh-26004
Allow the body to be written in order for all headers to be set
as they would be on HTTP GET. The body content is ignored as a
lower level.
See gh-25976
Prior to this commit, two @ActiveProfiles declarations with the same
profiles but different order resulted in an identical duplicate
ApplicationContext in the context cache in the Spring TestContext
Framework.
This commit uses a TreeSet to ensure that registered active profiles
are both unique and sorted, thereby avoiding cache misses for
semantically identical active profiles configuration on different test
classes.
Closes gh-25973
Prior to this commit, the Asciidoctor Gradle tasks generated top-level
HTML and PDF documents for AsciiDoc files that are included in other
top-level documents. This causes slower builds and results in each
include-file being published twice:
1) inline in the including document (as intended)
2) as a top-level document but missing surrounding context (unintended)
The reason these include-files are generated as top-level documents is
that the asciidoctor and asciidoctorPdf Gradle tasks are configured to
use '*.adoc' as the input source files.
This commit addresses this issue by moving the following include-files
to new subdirectories. Locating the include-files in the subdirectories
causes them to be ignored in the '*.adoc' pattern used to identify
input source files.
- data-access-appendix.adoc -> data-access/data-access-appendix.adoc
- integration-appendix.adoc -> integration/integration-appendix.adoc
- testing-webtestclient.adoc -> testing/testing-webtestclient.adoc
Closes gh-25783
Prior to this commit, the asciidoctor Gradle task was configured to
generate both the HTML5 and PDF backends. Unfortunately, this resulted
in resources such as HTML, JavaScript, CSS, and images being published
alongside the generated PDF documents.
This commit addresses this issue by introducing the use of a dedicated
asciidoctorPdf Gradle task. The existing asciidoctor Gradle task has
been modified to only generate HTML5 output.
In addition, the asciidoctor task now has a dynamic dependency on the
asciidoctorPdf task if the current project version is a non-SNAPSHOT
version. Thus, invoking `./gradlew asciidoctor` will still generate both
the HTML5 and PDF outputs for non-SNAPSHOT versions; whereas,
`./gradlew asciidoctorPdf` will generate only the PDF outputs regardless
of the current project version.
See gh-25783
UrlPathHelper is often created and used without customizations or with
the same customizations. This commit introduces re-usable, instances.
Effectively a backport of commit 23233c.
Closes gh-25690
Prior to this commit, StaticListableBeanFactory.isSingleton() returned
false for singleton beans unless they were created by a FactoryBean.
StaticListableBeanFactory.isSingleton() now properly returns true for
all beans not created by a FactoryBean.
Closes gh-25522
Prior to this commit, a Profiles instance created via Profiles.of() was
not considered equivalent to another Profiles instance created via
Profiles.of() with the exact same expressions. This makes it difficult
to mock invocations of Environment#acceptsProfiles(Profiles) -- for
example, when using a mocking library such as Mockito.
This commit makes Profiles instances created via Profiles.of()
"comparable" by implementing equals() and hashCode() in ParsedProfiles.
Note, however, that equivalence is only guaranteed if the exact same
profile expression strings are supplied to Profiles.of(). In other
words, Profiles.of("A & B", "C | D") is equivalent to
Profiles.of("A & B", "C | D") and Profiles.of("C | D", "A & B"), but
Profiles.of("X & Y") is not equivalent to Profiles.of("X&Y") or
Profiles.of("Y & X").
Closes gh-25340
This commit introduces support for writing JSON with an US-ASCII
character encoding in the Jackson encoder and message converter,
treating it like UTF-8.
See gh-25322
(cherry picked from commit 79c339b03e)
With this commit it is no longer assumed that all charset names in the
JsonEncoding can be resolved by Charset.forName. Instead, we store the
charset name itself, rather than the Charset object.
Prior to this commit, the `SslInfo` would be missing for WebFlux apps
when deployed on Reactor Netty with http/2.
This commit ensures that the request adapter checks the current channel
and the parent channel for the presence of the `SslHander`.
In the case of http/2, the `SslHander` is tied to the parent channel.
Fixes gh-25286
See gh-25278
This commit makes sure that Jackson-based message converters and
decoders can deal with non-unicode input. It does so by reading
non-unicode input messages with a InputStreamReader.
This commit also adds additional tests forthe canRead/canWrite methods
on both codecs and message converters.
Closes: gh-25247
Before this commit, Jackson2CodecSupport and subclasses
did not check media type encoding in the supportsMimeType
method (called from canEncode/canDecode).
As a result, the encoder reported that it can write
(for instance) "application/json;charset=ISO-8859-1", but in practice
wrote the default charset (UTF-8).
This commit fixes that bug.
Closes: gh-25076
Before this commit, AbstractJackson2HttpMessageConverter and subclasses
did not check media type encoding in the canRead and canWrite
methods. As a result, the converter reported that it can write
(for instance) "application/json;charset=ISO-8859-1", but in practice
wrote the default charset (UTF-8).
This commit fixes that bug.
See: gh-25076
Prior to this commit, there was no easy way to restrict what types could
be loaded from a YAML document in subclasses of YamlProcessor such as
YamlPropertiesFactoryBean and YamlMapFactoryBean.
This commit introduces a setSupportedTypes(Class<?>...) method in
YamlProcessor in order to address this. If no supported types are
configured, all types encountered in YAML documents will be supported.
If an unsupported type is encountered, an IllegalStateException will be
thrown when the corresponding YAML node is processed.
Closes gh-25152
Prior to this commit, ExchangeStrategies custom codec's reader and
writer were not registered due to a bug in BaseCodecConfigurer.
This commit fixes this by correcting the implementation of the
DefaultCustomCodecs constructor used within BaseCodecConfigurer.
Closes gh-25149
Prior to this commit, if attributes were configured in the builder
returned by `ServerRequest.from(...)`, those attributes were not
available in the `ServerRequest` built by the builder. In addition, any
attributes in the original `ServerRequest` supplied to
`ServerRequest.from(...)` were also ignored.
This commit addresses this issue by ensuring that the attributes
configured via DefaultServerRequestBuilder are used as the attributes
in the resulting `ServerRequest`.
This commit also polishes the Javadoc in `ServerRequest` and
`ClientResponse` and avoids the use of lambda expressions in the
constructors for `DefaultServerRequestBuilder` and
`DefaultClientResponseBuilder`.
Closes gh-25106
Prior to this commit, if an instance of XStreamMarshaller was used
concurrently from multiple threads without having first invoked the
afterPropertiesSet() method, the private `xstream` field could be
initialized multiple times resulting in a ConcurrentModificationException
in XStream's internal DefaultConverterLookup.
This commit fixes these concurrency issues by making the `xstream` field
volatile and by implementing a double-checked locking algorithm in
getXStream() to avoid concurrent instance creation.
Closes gh-25017
According to the Javadoc for ServletRequest's getServerName() method,
when the `Host` header is set, the server name is "the value of the
part before ':' in the Host header value ...". For a value representing
an IPV6 address such as `[::ffff:abcd:abcd]`, the enclosing square
brackets should therefore not be stripped from the enclosed IPV6
address.
However, the changes made in conjunction with gh-16704 introduced a
regression in Spring Framework 4.1 for the getServerName() method in
MockHttpServletRequest by stripping the enclosing brackets from the
IPV6 address in the `Host` header. Similarly, the changes made in
conjunction with gh-20686 introduced a regression in Spring Framework
4.3.13 and 5.0.2 in the getRequestURL() method in
MockHttpServletRequest by delegating to the getServerName() method
which strips the enclosing brackets.
This commit fixes the implementation of getServerName() so that the
enclosing brackets are no longer stripped from an IPV6 address in the
`Host` header. The implementation of getRequestURL() is therefore also
fixed.
In addition, in order to avoid a NullPointerException, the
implementations of getServerName() and getServerPort() now assert that
an IPV6 address present in the `Host` header correctly contains an
opening and closing bracket and throw an IllegalStateException if that
is not the case.
Closes gh-24916
This commit changes the way two RouterFunctions are composed in
WebFlux.fn. Prior to this commit, two were composed with
`switchIfEmpty()`, switching from the first to the second route if the
first did not provide an element.
After this commit, two router functions are compose using `concat`,
which results in a smaller stack trace.
See gh-24652
Jackson's asynchronous parser does not support any encoding except UTF-8
(or ASCII). This commit converts non-UTF-8/ASCII encoded JSON to UTF-8.
Closes gh-24489
Spring Framework 5.1.8 introduced a regression for the compilation of
SpEL expressions referencing a method declared in an interface. An
attempt to compile such an expression resulted in a
SpelEvaluationException caused by an IncompatibleClassChangeError.
This commit fixes this regression by adding explicit support in
ReflectivePropertyAccessor.OptimalPropertyAccessor.generateCode() for
methods declared in interfaces.
Closes gh-24357
This commit makes the Jackson2Tokenizer enable
TokenBuffer.forceUseOfBigDecimal if the element type given to the
Decoder is BigDecimal. Previous to this commit, values would be
converted to floats.
Closes gh-24479
After this commit, Jackson2Tokenizer honours ObjectMapper's
DeserializationFeature.USE_BIG_DECIMAL_FOR_FLOATS feature when creating
TokenBuffers.
Closes gh-24479
Before this commit, the AbstractJackson2Encoder instantiated a
ObjectWriter per value. This is not an issue for single values or
non-streaming scenarios (which effectively are the same, because in the
latter values are collected into a list until offered to Jackson).
However, this does create a problem for SMILE, because it allows for
shared references that do not match up when writing each value with a
new ObjectWriter, resulting in errors parsing the result.
This commit uses Jackson's SequenceWriter for streaming scenarios,
allowing Jackson to reuse the same context for writing multiple values,
fixing the issue described above.
Closes gh-24198
As of gh-21783, Spring WebFlux uses a `TomcatHeadersAdapter`
implementation to directly address the native headers used by the
server.
In the case of Tomcat, "Content-Length" and "Content-Type" headers are
processed separately and should not be added to the native headers map.
This commit improves the `HandlerAdapter` implementation for Tomcat and
removes those headers, if previously set in the map. The adapter
already has a section that handles the Tomcat-specific calls for such
headers.
Fixes gh-24387
The case of one data buffer containing multiple lines can could cause
a buffer leak due to a suspected issue in concatMapIterable. This
commit adds workarounds for that until the underlying issue is
addressed.
Closes gh-24346
Using Consumer<ClientCodecConfigurer> instead of
Consumer<ExchangeStrategies> eliminates one level of nesting that is
also unnecessary since codecs are the only strategy at present.
Backport of dd9b6287b4
Closes gh-24201
The new register methods replace the now deprecated
encoder, decoder, reader, and writer methods, and also offer a choice
to opt into default properties such maxInMemorySize, if configured.
Backport of 11e321b8e7
See gh-24201
As a follow-up of gh-23961, this change provides a way for custom codecs
to align with the default codecs' behavior on common features like
buffer size limits and logging request details.
Closes gh-24119
Co-authored-by: Rossen Stoyanchev <rstoyanchev@pivotal.io>
Prior to this commit, developers could configure their WebClient to use
their custom `ExchangeStrategies`, by providing it in the
`WebClient.Builder` chain.
Once created, an `ExchangeStrategies` instance is not mutable, which
makes it hard for further customizations by other components. In the
case of the reported issue, other components would override the default
configuration for the codecs maxInMemorySize.
This commit makes the `ExchangeStrategies` mutable and uses that fact to
further customize them with a new `WebClient.Builder#exchangeStrategies`
`Consumer` variant. This commit is also deprecating those mutating
variants in favor of a new `WebClient.Builder#exchangeStrategies` that
takes a `ExchangeStrategies#Builder` directly and avoids mutation issues
altogether.
Closes gh-24106
Fix uncommon case in Jackson2SmileDecoder, where a null token,
incicating a document separator in streaming mode, is followed by
NOT_AVAILABLE.
Closes gh-24009
(cherry picked from commit 5f3c7ca559)
Prior to this commit, methods in a @ControllerAdvice bean were
registered and invoked twice if the advice was a scoped bean (e.g.,
request or session scoped). In other words, both the proxy bean and the
target bean were wrapped in ControllerAdviceBean instances.
This commit fixes this bug by modifying the findAnnotatedBeans() method
in ControllerAdviceBean so that it filters out targets of scoped
proxies.
Closes gh-24017
Prior to this commit, InstantFormatter was able to properly serialize
an Instant that is far in the future (or in the past), but it could not
properly deserialize it, because in such scenarios an ISO-formatted
Instant starts with a +/- sign.
This commit fixes this issue, while maintaining the previous contract,
and also introduces tests for InstantFormatter.
Closes gh-23895
Prior to this commit, the schemaZip Gradle task failed to find Spring
schema files on MS Windows due to path separators hard coded to forward
slashes that are not compatible with the Windows operating system.
Consequently, a full build failed on Windows since the distZip task was
not able to locate the zipped schema archive that the schemaZip task
failed to create.
This commit fixes this by updating the schemaZip task to search for
schema files using backslashes as well as forward slashes.
Closes gh-23933
Changes introduced in commit 9b2087618b
caused a regression for Cookie support in MockHttpServletResponse.
Specifically, an Expires attribute that cannot be parsed using
`ZonedDateTime.parse()` now results in an exception; whereas,
previously an entry such as `Expires=0` was allowed.
This commit fixes this issue in MockCookie by catching and ignoring any
DateTimeException thrown while attempting to parse an Expires attribute.
Closes gh-23911
Prior to this commit, the `DateFormatterRegistrar` would register the
annotation-based formatter before the pattern-based formatter. This
would create an issue when an application tries to convert a `String` to
an annotated `@DateTimeFormat Date`: since the converters are considered
in reversed order of registration in
`GenericConversionServicei#ConvertersForPair`, the pattern-based variant
would always be considered before the annotation-based variant,
overriding the developer's opinion.
This commit aligns the `DateFormatterRegistrar` with the
`DateTimeFormatterRegistrar` and registers the annotation-based variant
last.
Closes gh-23896
Prior to this commit, if MockServletContext was configured with a
FileSystemResourceLoader, invocations of the following methods on a
Microsoft Windows operating system resulted in an InvalidPathException
if the supplied path contained a colon (such as "C:\\temp"). This is
inconsistent with the behavior on non-Windows operating systems. In
addition, for comparable errors resulting in an IOException, those
methods (except getRealPath()) return null instead of throwing the
exception.
- getResourcePaths()
- getResource()
- getResourceAsStream()
- getRealPath()
This commit makes handling of InvalidPathException and IOException
consistent for these methods: both exceptions now result in null be
returned by these methods.
Closes gh-23717
A ResponseStatus exception now exposes extra method to return headers
for the response. This is used in ResponseStatusExceptionHandler to
apply the headers to the response.
Closes gh-23741
At present, MockCookie doesn't preserve expires attribute. This has a
consequence that a cookie value set using
MockHttpServletResponse#addHeader containing an expires attribute will
not match the cookie value obtained from
MockHttpServletResponse#getHeader, since the expires attribute will get
calculated based on current time.
This commit enhances MockCookie to preserve the expires attribute.
Closes gh-23769
- Add maxInMemorySize property to Decoder and HttpMessageReader
implementations that aggregate input to trigger
DataBufferLimitException when reached.
- For codecs that call DataBufferUtils#join, there is now an overloaded
variant with a maxInMemorySize extra argument. Internally, a custom
LimitedDataBufferList is used to count and enforce the limit.
- Jackson2Tokenizer and XmlEventDecoder support those limits per
streamed JSON object.
- Configurable limits for multipart requests with Synchronoss NIO.
- Centralized maxInMemorySize exposed via CodecConfigurer along with
ability to plug in an instance of MultipartHttpMessageWrite.
Closes gh-23884
Bypass server cookie and write Set-Cookie header directly for Reactor
Netty, and Servlet API which do not provide options.
For Undertow use the sameSite attribute.
Closes gh-23693
If an error looks like a "disconnected client" but the response is not
yet committed then it can't be an I/O error from writing to the server
response. It is most likely as a result of a remote call as part of
request handling.
Not setting the response to 500 in this case results in a 200 response
status despite the error. Even if it was an I/O error from the server
response, setting the status won't impact a failed response.
Closes gh-23319
While resolving the regression raised in gh-23571, it came to our
attention that not all of our ClassFilter and MethodMatcher
implementations were properly cacheable with CGLIB generated proxies
due to missing (or improper) equals() and hashCode() implementations.
Although such deficiencies may not manifest themselves as bugs in Core
Spring's default arrangements, these might cause issues in custom
arrangements in user applications.
This commit addresses this by ensuring that ClassFilter and
MethodMatcher implementations properly implement equals() and
hashCode(). In addition, missing toString() implementations have been
added to improve diagnostics for logging and debugging.
Closes gh-23659
Prior to this commit, concurrent invocations of
DefaultListableBeanFactory.removeBeanDefinition() could result in a
NullPointerException.
This commit fixes this by adding an appropriate not-null check in
resetBeanDefinition().
Closes gh-23542
This commit makes sure that DefaultResourceLoader consistently use
getProtocolResolvers() to access additional protocol resolvers. This
allows subclasses to define how the list is provided.
Closes gh-23564
On a Servlet container a completion notification may come at any time
even in the UNSUBSCRIBED state, i.e. before the write Publisher has
called onSubscribe.
See: gh-23553
Prior to this commit, the copyConfigurationFrom(ConfigurableBeanFactory)
method in DefaultListableBeanFactory cloned its own AutowireCandidateResolver
type instead of the resolver type from the supplied ConfigurableBeanFactory.
This commit fixes that by cloning the resolver type from the supplied
ConfigurableBeanFactory.
Closes gh-23569
Prior to this commit, Spring failed to determine that an XML config file
was DTD-based if the DTD declaration was followed by a comment.
This commit fixes this by modifying the consumeCommentTokens(String)
algorithm in XmlValidationModeDetector so that both leading and trailing
comments are properly consumed without losing any XML content.
Closes gh-23605
Prior to this commit, the isSimpleProperty() and isSimpleValueType()
methods in BeanUtils treated void and Void as simple types; however,
doing so does not make sense in this context, since void implies the
lack of a property or value.
This commit addresses this by explicitly excluding void and Void in the
logic in isSimpleValueType().
This commit also simplifies the implementation of
ViewResolutionResultHandler.supports(HandlerResult) to take advantage
of this change.
Closes gh-23573
This commit reverts all artifactory configuration changes in this
branch. A new build plan has been created for the master branch which is
tailored for the latest Gradle changes made on that branch.
This commit adds a missing dependency from the artifactoryPublish task
to the "install" task as POMs are currently missing from the published
artifacts and they are generated with the "install" task here.
Prior to this commit, ClassUtils.isPrimitiveOrWrapper() and
ClassUtils.isPrimitiveWrapper() did not return true for Void.class.
However, ClassUtils.isPrimitiveOrWrapper() did return true for
void.class. This lacking symmetry is inconsistent and can lead to bugs
in reflective code.
See: https://github.com/spring-projects/spring-data-r2dbc/issues/159
This commit addresses this by adding an entry for Void.class -> void.class
in the internal primitiveWrapperTypeMap in ClassUtils.
Closes gh-23572
This commit makes sure that reading is enabled after the current
signal has been processed, not while is is being processed. The bug
was only apparent while using the JettyClientHttpConnector, which
requests new elements continuously, even after the end of the
stream has been signalled.
Prior to this commit, the entry set of read-only HttpHeaders lost the
original headers' ordering.
The changes in commit ce7278aaf4 introduced a regression in the read-only
HttpHeaders support. Specifically, the implementation of entrySet() in
the internal ReadOnlyHttpHeaders class converted the original entry set
to an immutable, non-ordered set of immutable entries.
This commit fixes this issue by converting the original entry set to an
immutable, ordered set of immutable entries.
Closes gh-23551
Since gh-23282, our CI does not apply automatically the Artifactory
Gradle plugin during our build and we're now applying it "manually".
This commit backports this change since the build configuration is
shared between branches.
See gh-23282
Prior to this commit, there was no way to replace the Set-Cookie header
via MockHttpServletResponse. Specifically, an invocation of setHeader()
for the Set-Cookie header resulted in an additional Set-Cookie header
instead of replacing the existing one, which is in violation of the
contract for javax.servlet.http.HttpServletResponse.setHeader(...).
This commit refactors the internals of MockHttpServletResponse to ensure
that an existing Set-Cookie header is overwritten when set via an
invocation of setHeader(). This commit also verifies the expected
behavior for addHeader() and addCookie() with regard to multiple cookies.
Closes gh-23512
The use of LinkedCaseInsensitiveMap, going back to 3.0, makes it
unnecessary to iterate over keys which can cause
ConcurrentModificationException.
Closes gh-23460
Since Java 8, putIfAbsent() is a standard method in java.util.Map. We
therefore no longer need the custom implementation that overrides the
standard implementation in HashMap.
Prior to this commit, AnnotationAttributes#assertNotException checked if
the attribute value was an instance of Exception. Although this was
typically sufficient, the scope was not always broad enough -- for
example, if AnnotationReadingVisitorUtils#convertClassValues stored a
Throwable in the map (such as a LinkageError).
This commit fixes this by checking for an instance of Throwable in
AnnotationAttributes#assertNotException.
Closes gh-23424
Added support for status codes that do not occur in HttpStatus in
DefaultClientResponseBuilder and made ClientResponse::statusCode
ClientHttpResponse::getStatusCode @Nullable.
Closed gh-23366
- Add onRawStatus to WebClient.ResponseSpec, allowing users to deal with
raw status codes that are not in HttpStatus.
- No longer throw an exception status codes not in HttpStatus.
Closes gh-23367
The isJavaIdentifier check is not really required, but also seems
intuitive for variables to be Java identifier-like. This commit relaxes
the constraint a bit by also allowing "-".
Closes gh-23101
Prior to this commit, the `header(String, String)` method in the
ServerHttpRequest.Builder API actually added a header value instead of
setting or overriding a header value. Since this conflicted with the
stated behavior in the Javadoc as well as the original intention of the
method, we have decided to introduce an overloaded variant
`header(String, String...)` which accepts a var-args list of header
values to set or override.
In addition, this commit deprecates the existing `header(String, String)`
method for removal in Spring Framework 5.2.
In order not to be a breaking change for custom implementations of the
builder API, this commit implements the new `header(String, String...)`
method as an interface `default` method, with the intent to remove the
default implementation in Spring Framework 5.2
closes gh-23333
Fix `isAssignable` for `ResolvableType.forRawClass` so that it can be
used with types backed by a `TypeVarible`. Prior to this commit the
rawClass value was used, which wouldn't always work.
Closes gh-23321
Prior to this commit, AbstractAutowireCapableBeanFactory's
invokeCustomInitMethod() method invoked
ClassUtils.getInterfaceMethodIfPossible() even if the security manager
was not being used.
This commit ensures that getInterfaceMethodIfPossible() is only invoked
if the security manager is used.
Closes gh-23323
Replace docs on using MultipartBodyBuilder for the RestTemplate with
examples that show MultiValueMap. Originally the idea was to make
MultipartBodyBuilder accessible to the RestTemplate too, but with
support for async parts that's no longer a good fit.
Closes gh-23295
Prior to this commit, there was some ambiguity surrounding semantics
for @Autowired constructors and `required = true`, especially for
multiple @Autowired constructors.
This commit improves the documentation in the Javadoc for @Autowired as
well as in the reference manual.
Closes gh-23263
OncePerRequestFilter now has a doFilter method that allows separate
processing of nested ERROR dispatches. This is useful for filters
that wrap the request and response.
Closes gh-23196
Prior to this commit, if the user configured an empty path for the
targetRequestPath property of a FlashMap, the FlashMapManager threw a
StringIndexOutOfBoundsException when saving the output FlashMap for the
next request.
This commit fixes this by skipping the decoding and normalization of an
empty target request path.
Fixes gh-23240
Prior to Spring Framework 5.1.3, MimeTypeUtils.parseMimeTypes() and
MediaType.parseMediaTypes() ignored empty entries, but 5.1.3 introduced
a regression in that an empty entry -- for example, due to a trailing
comma in the list of media types in an HTTP Accept header -- would result
in a "406 Not Acceptable" response status.
This commit fixes this by filtering out empty entries before parsing
them into MimeType and MediaType instances. Empty entries are therefore
effectively ignored.
Fixes gh-23241
Use a callback to detect token authentication (via inteceptor) thus
avoiding a potential race between that detection after the message is
sent on the inbound channel (via Executor) and the processing of the
CONNECTED frame returned from the broker on the outbound channel.
Closes gh-23160
Prior to this commit, it was unclear that an invocation of getCache()
might potentially create a new Cache.
This commit updates the Javadoc to point out that concrete CacheManager
implementations may choose to create a new Cache at runtime if the Cache
does not already exist.
Closes gh-23193
This commit clarifies the semantics of the PriorityOrdered interface
with respect to sorting sets of objects containing both PriorityOrdered
and plain Ordered objects.
Closes gh-23187
Prior to this commit, MockHttpServletRequest.setCookies() produced one
Cookie header per supplied cookie, resulting in multiple Cookie headers
which violates the specification.
This commit fixes this by ensuring that all cookie name-value pairs are
stored under a single Cookie header, separated by a semicolon.
Closes gh-23074
Beginning with Spring Framework 5.0, non-null checks for the
requiredType in the following methods were inadvertently removed with
the internal switch to ResolvableType.forRawClass(requiredType).
- BeanFactory.getBean(Class<T>, Object...)
- BeanFactory.getBeanProvider(Class<T>)
- AutowireCapableBeanFactory.resolveNamedBean(Class<T>)
This commit restores those non-null checks.
Closes gh-23045
ViewResolutionResultHandler no longer adds BindingResult objects for
async model attributes. Instead AbstractView adds them later when
those attributes are resolved to concrete values.
Closes gh-22933
Prior to this commit, HeaderResultMatchers had a direct dependency on
org.junit.Assert which forces JUnit 4 to be present on the classpath.
This commit fixes this by introducing assertNotNull() in
org.springframework.test.util.AssertionErrors and delegating to that
instead.
Fixes gh-22932
@@ -29,7 +29,7 @@ If you have a question, check StackOverflow using
Find an existing discussion or start a new one if necessary.
If you suspect an issue, perform a search in the
[GitHub issue tracker](https://github.com/spring-projects/spring-framework/issues), using a few different keywords.
[Github issue tracker](https://github.com/spring-projects/spring-framework/issues), using a few different keywords.
When you find related issues and discussions, prior or current, it helps you to learn and
it helps us to make a decision.
@@ -42,17 +42,18 @@ Before you create a ticket, please take the time to [research first](#discuss).
If creating a ticket after a discussion on StackOverflow, please provide a self-sufficient description in the ticket, independent of the details on StackOverview. We understand this is extra work but the issue tracker is an important place of record for design discussions and decisions that can often be referenced long after the fix version, for example to revisit decisions, to understand the origin of a feature, and so on.
When ready create a ticket in the [GitHub issue tracker](https://github.com/spring-projects/spring-framework/issues).
When ready create a ticket in the [Github issue tracker](https://github.com/spring-projects/spring-framework/issues).
#### Ticket Lifecycle
When an issue is first created, it is flagged `waiting-for-triage` waiting for a team
member to triage it. Within a day or two, the issue will then be reviewed and the team
may ask for further information if needed. Based on the findings, the issue is either
assigned a fix version or declined.
When an issue is first created, it may not be assigned and will not have a fix version.
Within a day or two, the issue is assigned to a specific committer and the target
version is set to "Waiting for Triage". The committer will then review the issue, ask for
further information if needed, and based on the findings, the issue is either assigned a fix
version or rejected.
When a fix is ready, the issue is closed and may still be re-opened. Once a fix is
released, the issue can't be reopened. If necessary, you will need to create a new,
When a fix is ready, the issue is marked "Resolved" and may still be re-opened. Once a fix
is released, the issue is permanently "Closed". If necessary, you will need to create a new,
related ticket with a fresh description.
#### Submit a Pull Request
@@ -82,8 +83,9 @@ multiple edits or corrections of the same logical change. See
[Rewriting History section of Pro Git](https://git-scm.com/book/en/Git-Tools-Rewriting-History)
for an overview of streamlining commit history.
1. Format commit messages using 55 characters for the subject line, 72 characters per line
for the description, followed by the issue fixed, e.g. `Closes gh-22276`. See the
1. Format commit messages using 55 characters for the subject line, 72 lines for the
description, followed by the issue fixed, e.g. `Fixes #22276`.
See the
[Commit Guidelines section of Pro Git](https://git-scm.com/book/en/Distributed-Git-Contributing-to-a-Project#Commit-Guidelines)
for best practices around commit messages and use `git log` to see some examples.
@@ -19,7 +19,7 @@ The Spring Framework maintains reference documentation ([published](https://docs
## Build from Source
See the [Build from Source](https://github.com/spring-projects/spring-framework/wiki/Build-from-Source) Wiki page and the [CONTRIBUTING.md](CONTRIBUTING.md) file.
See the [Build from Source](https://github.com/spring-projects/spring-framework/wiki/Build-from-Source) Wikipedia page and the [CONTRIBUTING.md](CONTRIBUTING.md) file.
The Spring Framework uses https://concourse-ci.org/[Concourse] for its CI build and other automated tasks.
The Spring team has a dedicated Concourse instance available at https://ci.spring.io with a build pipeline
for https://ci.spring.io/teams/spring-framework/pipelines/spring-framework-5.1.x[Spring Framework 5.1.x].
=== Setting up your development environment
If you're part of the Spring Framework project on GitHub, you can get access to CI management features.
First, you need to go to https://ci.spring.io and install the client CLI for your platform (see bottom right of the screen).
You can then login with the instance using:
[source]
----
$ fly -t spring login -n spring-framework -c https://ci.spring.io
----
Once logged in, you should get something like:
[source]
----
$ fly ts
name url team expiry
spring https://ci.spring.io spring-framework Wed, 25 Mar 2020 17:45:26 UTC
----
=== Pipeline configuration and structure
The build pipelines are described in `pipeline.yml` file.
This file is listing Concourse resources, i.e. build inputs and outputs such as container images, artifact repositories, source repositories, notification services, etc.
It also describes jobs (a job is a sequence of inputs, tasks and outputs); jobs are organized by groups.
The `pipeline.yml` definition contains `((parameters))` which are loaded from the `parameters.yml` file or from our https://docs.cloudfoundry.org/credhub/[credhub instance].
You'll find in this folder the following resources:
* `pipeline.yml` the build pipeline
* `parameters.yml` the build parameters used for the pipeline
* `images/` holds the container images definitions used in this pipeline
* `scripts/` holds the build scripts that ship within the CI container images
* `tasks` contains the task definitions used in the main `pipeline.yml`
=== Updating the build pipeline
Updating files on the repository is not enough to update the build pipeline, as changes need to be applied.
The pipeline can be deployed using the following command:
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Stephane Nicoll