The migration to Gradle 7.2 resulted in a regression for our Eclipse
IDE support: several projects ended up with recursive classpath entries
in their generated .classpath files which prevent those projects from
being built within Eclipse.
This commit addresses this issue with a solution that may well be a
"hack". Nonetheless, a working hack is better than not being able to
import into Eclipse at all.
See gh-26870
This upgrade avoids warnings about the following on Gradle 7.1+.
- The Report.destination property has been deprecated.
- The JavaExec.main property has been deprecated.
See gh-26870
Migrate `CoroutinesUtils` from Kotlin code to Java and drop the
`kotlin-coroutines` module.
This update removes the need for Kotlin tooling IDE plugins to be
installed.
Closes gh-27379
HttpMessageConverterExtractor uses MessageBodyClientHttpResponseWrapper
which may read the first byte of the response stream to check if there
is content. After that it is necessary to use the wrapper to get the
full body.
This commit ensures that when UnknownContentTypeException is raised
it gets the body through the wrapper, or otherwise the first byte is
missed if the InputStream is not markable.
Closes gh-27374
To support the recent changes to our `optional` dependencies plugin,
this commit removes the Eclipse-specific code which no longer appears
to be necessary.
Closes gh-27365
This commit ensures that Servlet 4.0+ is used in the Spring OXM test
suite, as Servlet 4 specific APIs are used in the tests.
This problem was uncovered while fixing gh-27365
This allows the attributes configured on compileClasspath and
runtimeClasspath to independently influence the variant selection when
resolving the optional configuration, allowing it to contribute compile
dependencies (JAVA_API) to the former and runtime dependencies
(JAVA_RUNTIME) to the latter.
Fixes gh-27365
Previously, the optional configuration had no usage attribute. This
resulted in it using the default, JAVA_RUNTIME, which caused it to
only consume the runtime produced by its dependencies and not the
API. Given that the optional configuration is added to the compile
classpath, this was incorrect.
This commit updates the optional configuration to be configured to
consume the Java API of its dependencies. The configuration has
also been marked as not being for consumption. This prevents other
projects attempting to consume the optional variant of a project
that has the optional dependencies plugin applied and further
aligns it with Gradle's built-in configurations of a similar nature.
See gh-27365
This commit updates the defaultResponseCharacterEncoding() `default`
method in ConfigurableMockMvcBuilder so that it throws an
UnsupportedOperationException instead of silently ignoring the user's
request to set the default response character encoding.
Note, however, that AbstractMockMvcBuilder already overrides the
default method with a concrete implementation which is used by default
in MockMvc.
See gh-27230
This commit applies several optimizations to StringUtils#cleanPath and
related methods:
* pre-size pathElements deque in StringUtils#cleanPath with
pathElements.length elements, since this this is the maximum size and
the most likely case.
* optimize StringUtils#collectionToDelimitedString to calculate the size
of the resulting String and avoid array auto-resizing in the
StringBuilder.
* If the path did not contain any components that required cleaning,
return the (normalized) path as-is. No need to concatenate the prefix
and the trailing path.
See gh-26316
This commit also fixes a bug introduced in commit e99b43b91e, where
java.time.Duration strings were converted to milliseconds and then
converted again using the configured TimeUnit.
See gh-27309
This commit introduces a new `timeUnit` attribute in the @Scheduled
annotation to allow the user to specify a time unit other than
milliseconds.
Closes gh-27309
It happens very often that WebTestClient is used in heavyweight
integration tests, and it's a hindrance to developer productivity to
fix one failed assertion after another. Soft assertions help a lot by
checking all conditions at once even if one of them fails.
This commit introduces a new expectAllSoftly(..) method in
WebTestClient to address this issue.
client.get().uri("/hello")
.exchange()
.expectAllSoftly(
spec -> spec.expectStatus().isOk(),
spec -> spec.expectBody(String.class).isEqualTo("Hello, World")
);
Closes gh-26969
It happens very often that MockMvc is used in heavyweight integration
tests. It's no use to waste time to check if another condition has been
fixed or not. Soft assertions help a lot by checking all conditions at
once even if one of them fails.
See gh-26917
Co-authored-by: Sach Nguyen <sachnbbkhn@gmail.com>
Prior to this commit, if the user tested file upload support with
HtmlUnit and MockMvc by invoking HtmlFileInput.setData() instead of
HtmlFileInput.setFiles(), the in-memory file data was simply ignored.
This commit addresses this issue by creating a MockPart from the
in-memory data in HtmlUnitRequestBuilder.
Closes gh-27199
Prior to this commit, the hasContributors() method incorrectly returned
false if contributors had been configured.
This commit fixes the logic in hasContributors() and documents it.
Closes#27271
To improve the developer experience and avoid the use of String
literals, this commit provides overloaded support via Charset for
character encoding in MockHttpServletRequestBuilder and
ContentResultMatchers.
Closes gh-27231
Commit e4b9b1fadb introduced support for setting the default character
encoding in MockHttpServletResponse.
This commit introduces support for configuring the default character
encoding in the underlying MockHttpServletResponse used in MockMvc.
Closes gh-27230
Prior to this commit, MockMvc applied global ResultMatchers before
global ResultHandlers. This lead to unexpected scenarios where a
failing matcher would prevent a handler from being applied.
One concrete use case is `alwaysDo(print(System.err))` which should
print out MockMvc results for debugging purposes. However, if MockMvc is
configured with something like `alwaysExpect(content().string("?"))`
and the expectation fails, the user will never see the expected debug
output to help diagnose the problem.
This commit addresses this issue by applying global ResultHandlers
before ResultMatchers in MockMvc.
Closes gh-27225
Prior to this commit, it was possible to set the character encoding
in MockHttpServletResponse via setCharacterEncoding() or
setContentType(); however, those methods append "charset=..." to the
Content-Type header which may not be an acceptable side effect.
This commit addresses this shortcoming by introducing a new
setDefaultCharacterEncoding() in MockHttpServletResponse which allows
one to override the previously hard coded value of "ISO-8859-1". In
addition, setDefaultCharacterEncoding() does not modify the Content-Type
header.
The reset() method has also been updated to reset the character encoding
to the configured default character encoding.
Closes gh-27214
This commit improves the documentation for @Cacheable to point out that
`null` will be stored in the cache for an empty `Optional` return value.
Closes gh-27184
Prior to this commit, if the TaskExecutor configured in
WebSocketMessageBrokerStats for the inboundChannelExecutor or
outboundChannelExecutor was not a ThreadPoolTaskExecutor, a
StringIndexOutOfBoundsException was thrown when attempting to parse the
results of invoking toString() on the executor.
The reason is that ThreadPoolTaskExecutor delegates to a
ThreadPoolExecutor whose toString() implementation generates text
containing "pool size = ...", and WebSocketMessageBrokerStats'
getExecutorStatsInfo() method relied on the presence of "pool" in the
text returned from toString().
This commit fixes this bug by ensuring that the text returned from
toString() contains "pool" before parsing the text. If "pool" is not
present in the text, getExecutorStatsInfo() now returns "unknown"
instead of throwing a StringIndexOutOfBoundsException.
Closes gh-27209
A side effect of 71995a9087 caused the
dynamic table of contents in the left-hand side navigation to no longer
be displayed, likely due to the missing "details" DIV.
This commit addresses this issue by applying the custom header only to
index.adoc.
Consequently, the TOC is now displayed again on all pages except the
index page, but the customized header is no longer applied to those
pages.
We may revisit this issue if we decide that we want the custom header
on all pages (and not just the index page).
Closes gh-27177
If the ThreadPoolTaskExecutor is dynamically changed with an invalid value
the state of the ThreadPoolTaskExecutor does no longer correctly represent
the state of the underlying ThreadPoolExecutor
This commit makes JettyServerHttpRequest aware of
HttpServletRequestWrapper, and JettyServerHttpResponse aware of
HttpServletResponseWrapper.
Closes gh-27146
Before this commit, JettyClientHttpResponse checked for the presence of
a server-side class to determine whether it is running on Jetty 10.
Unfortunately, that class is not necessarily present when just using the
Jetty client.
This commit improves the Jetty 10 check, so that it also works when
the Jetty client is used without the server.
Closes gh-27136
This commit makes sure that we no longer use the internal API in the
Jetty support for the WebClient. With this change, we are able to
support both Jetty 9, 10, and 11.
Closes gh-27112
This reverts commit d6df4a6577 because running
gradle generatePomFileForMavenJavaPublication throws a
kotlin.KotlinNullPointerException error with Kotlin 1.5.20.
Revert Mockito upgrade done in 5d919dc094 because
Byte Buddy transitive upgrade from 1.11.1 to 1.11.3 seems to break Mockk tests
with java.security.AccessControlException related errors, so probably
better to wait Mockito using Byte buddy 1.11.5+ which seems to refine
this area, see https://github.com/raphw/byte-buddy/releases/tag/byte-buddy-1.11.5.
To slightly improve performance, this commit switches to
StringBuilder.append(char) instead of StringBuilder.append(String)
whenever we append a single character to a StringBuilder.
Closes gh-27098
Prior to this commit, ConfigurationClass implemented equals(),
hashCode(), and toString(), but BeanMethod did not.
This commit introduces equals(), hashCode(), and toString()
implementations in BeanMethod for consistency with ConfigurationClass
to make it possible to use BeanMethod instances to index additional
metadata as well.
In order to properly implement equals() in BeanMethod, the method
argument types are required, but these are not directly available in
BeanMethod. However, they are available via ASM when processing @Bean
methods. This commit therefore implements equals(), hashCode(), and
toString() in SimpleMethodMetadata which BeanMethod delegates to.
For completeness, this commit also implements equals(), hashCode(), and
toString() in StandardClassMetadata, StandardMethodMetadata, and
SimpleAnnotationMetadata.
Closes gh-27076
Prior to this commit, the toString() implementation did not separate
method argument types with a comma or any form of separator, leading
to results such as:
org.example.MyClass.myMethod(java.lang.Stringjava.lang.Integer)
instead of:
org.example.MyClass.myMethod(java.lang.String,java.lang.Integer)
Closes gh-27095
This commit defines the doc-root and api-spring-framework attributes
once in docs.gradle instead of duplicating them in each *.adoc file.
This commit also introduces a new docs-spring-framework global
attribute.
This commit disables the automatic header generation from Asciidoc's
default template and replaces it with a custom header that omits the
"Version" label before the revision number. The revision number is also
displayed in a simple span tag in order to reduce the amount of
vertical space taken by the header.
Prior to this commit, if a PathContainer was created using
Options.MESSAGE_ROUTE, DefaultPathSegment#parameters() returned a
mutable map which would allow the user to modify the contents of the
static, shared EMPTY_PARAMS map in DefaultPathContainer.
This commit prevents corruption of the shared EMPTY_PARAMS map by
ensuring that parameters stored in DefaultPathSegment are always
immutable.
Closes gh-27064
This commit revisits the recently updated `PORT_PATTERN` in
`UriComponentsBuilder`. The fix introduced in gh-26905 fails with
ambiguous URL patterns, especially when the port and path parts of the
pattern are hard to differentiate, for example
"https://localhost:{port}{path}".
This commit reinstates the previous behavior without undoing the actual
fix. The only limitation introduced here is the fact that only a single
pattern variable is allowed for the port pattern part.
Fixes gh-27039
Prior to this commit, the `HttpComponentsClientHttpConnector`
implementation could accept or create a default `HttpClient` instance
but not expose it as part of its API. This effectively prevents
applications from properly closing the associated resources when
disposing of the connector.
This commit implements the `Closeable` interface on the connector to
allow this use case.
Closes gh-27032
Proposed change aimed to keep coherence between variable declaration
and static initialization code, which stores 9 values, not 8, in these
two maps.
Closes gh-27016
Prior to this commit, in some cases application context startup steps
could be created concurrently, which could cause issues with the current
implementation tracking the parent/child relationship between steps.
This commit ensures that the flight recorder implementation is using
thread safe collection implementations for that.
Fixes gh-26941
Make sure that we use the parameter name in MultipartBodyBuilder::part
when adding a Part, instead of using the name specified in the
'Content-Disposition' header that might have been in the part's headers.
Closes gh-27007
This commit improves the Javadoc regarding transactional semantics for
@TransactionalEventListener methods invoked in the AFTER_COMMIT,
AFTER_ROLLBACK, or AFTER_COMPLETION phase. Specifically, the
documentation now points out that interactions with the underlying
transactional resource will not be committed in those phases.
Closes gh-26974
Prior to this commit, the `RouterFunctionMapping` WebFlux.fn variant
would set the `HandlerMapping.BEST_MATCHING_PATTERN_ATTRIBUTE` as an
exchange attribute. This is useful for instrumentation purposes.
The WebMvc.fn variant would not do the same; this would lead to
"UNKNOWN" path metrics tags.
This commit ensures that the `RouterFunctionMapping` WebMvc.fn variant
does set the `BEST_MATCHING_PATTERN_ATTRIBUTE` and
`BEST_MATCHING_HANDLER_ATTRIBUTE` request attributes.
Closes gh-26963
Many of the utility methods in ScriptUtils are public only because they
were once invoked from JdbdTestUtils in spring-test, which is no longer
the case. Consequently, there should no longer be a need for any
external clients to invoke such methods.
To address this, this commit formally deprecates the following methods
in ScriptUtils in spring-jdbc.
- readScript(...)
- containsSqlScriptDelimiters(...)
- splitSqlScript(...)
Closes gh-26947
Prior to this commit, many of the utility methods in ScriptUtils in
spring-r2dbc were public by accident: they were copied from ScriptUtils
in spring-jdbc without changing the visibility when spring-r2dbc was
introduced in Spring Framework. 5.3 GA.
This commit corrects this mistake by removing internal APIs from
ScriptUtils in spring-r2dbc from the public contract.
See gh-26947
This commit picks up where 569ce840cf left off, by correctly invoking
the new containsStatementSeparator(...) method from
executeSqlScript(...) in ScriptUtils in spring-r2dbc.
See gh-26911
Prior to this commit, the implementations of
ScriptUtils.containsSqlScriptDelimiters() in spring-jdbc and
spring-r2dbc did not ignore comments when searching for the statement
delimiter within an SQL script. This resulted in subtle bugs if a
comment contained a single single-quote or single double-quote, since
the absence of the closing single-quote or double-quote led the
algorithm to believe that it was still "within a text literal". Similar
issues could arise if a comment contained the sought statement
delimiter but the rest of the script did not contain the sought
statement delimiter. In such cases, the algorithms in ScriptUtils could
erroneously choose an incorrect statement delimiter -- for example,
using the fallback statement delimiter instead of the delimiter
specified by the user.
This commit avoids such bugs by ignoring single-line comments and block
comments when searching for the statement delimiter within an SQL
script.
Closes gh-26911
Prior to this commit, the containsSqlScriptDelimiters() method in
ScriptUtils ignored delimiters enclosed in single quotes but not those
enclosed within double quotes, which contradicts the algorithm in
splitSqlScript() and therefore constitutes a bug.
This commit fixes this bug in the ScriptUtils implementations in
spring-jdbc and spring-r2dbc.
Closes gh-26935
This commit makes sure that the DefaultPartHttpMessageReader uses a
random temporary directory to store uploaded files, so that two
instances do not collide.
See gh-26931
This commit makes sure that Synchronoss uses a random temporary
directory to store uploaded files, so that two instances do not collide.
Closes gh-26931
Recent commit dddcc5e9ad ensured a
trailing "/" in the Origin header has no effect. This commit does the
same for a trailing "/" in configured patterns.
See gh-26892
The pattern was changed in 65797d04f2
to check for characters up until "/", instead of for digits, but now
also checks up until "?" and "#".
Closes gh-26905
Prior to this commit, when Web MVC attempted to resolve a constructor
argument for a data class constructor with @ModelAttribute binding,
ModelAttributeMethodProcessor failed to unwrap the array returned by
WebRequest.getParameter(String).
According to the Javadoc for WebRequest.getParameter(String), "a
single-value parameter will be exposed as an array with a single
element."
This commit fixes this issue by extracting the single value from such
an array and using that as the constructor argument (potentially
converted by the WebDataBinder).
Closes gh-25200
This commit revises the fix submitted in 959e6d1745 by ensuring that
empty file input is converted to a MockPart with the supplied name, an
empty filename, "application/octet-stream" as the content type, and
empty content.
This aligns with the behavior of Servlet containers, as tested with the
interaction between Firefox and a standard Servlet running in a Jetty
Servlet container.
Closes gh-26799
Prior to this commit, when using HtmlUnit with empty file input,
MockMvc's HtmlUnitRequestBuilder would throw a NullPointerException
when attempting to create a MockPart based on the null File.
This commit ensures that empty file input is converted to a MockPart
with a valid name but with a null filename, a null content type, and
empty content.
Closes gh-26799
Prior to this commit, we registered custom values in the build scan for
the main and test toolchains based on input values provided via the
mainToolchain and testToolchain project properties.
Beginning with this commit, the custom values we register are based on
the available metadata for the resolved JDK/JVM for each toolchain.
For example, instead of registering the following custom value...
Test toolchain : JDK11
... we now register the following which includes the vendor, version,
and installation path of the JDK/JVM.
Test toolchain : AdoptOpenJDK 11 (/Library/Java/JavaVirtualMachines/adoptopenjdk-11.jdk/Contents/Home)
Once Gradle's JavaInstallationMetadata includes the exact version, we
will likely use that instead of the installation path.
See gh-25787
Prior to this commit, the task parameters for the CI project checks were
overridden by a task anchor. This commit splits the anchor declaration
and ensures that the `TEST_TOOLCHAIN` setting is set for the JDK
variant builds.
See gh-25787
Commit 3eec27a723 introduced a custom resource filter for projects
imported into Eclipse IDE. However, commit 85eb589c2e introduced
generated source files within the Gradle 'build' folder, and the filter
prevents Eclipse from seeing the generated sources, resulting in build
errors within the spring-oxm project in Eclipse.
This commit therefore effectively reverts 3eec27a723 by removing the
resource filter.
See gh-25787
Prior to this commit, @ModelAttribute(binding=false) was honored with
Spring Web MVC but not with WebFlux.
This commit adds support for disabling binding via @ModelAttribute with
WebFlux by adding a check to resolveArgument(...) in
ModelAttributeMethodArgumentResolver.
Closes gh-26856
This commit fixes various issues with the configuration of the Gradle
Java toolchain in the build.
First, the configuration of build properties is fixed in the CI pipeline
because it wasn't properly checked.
The JMH plugin is also upgraded and we now configure its toolchain
support.
This commit also rewrites the XJC tasks in the spring-oxm module,
leveraging a Gradle plugin that creates actual compile tasks we can
configure.
See gh-25787
This commit makes sure that LinkedCaseInsensitiveMap::computeIfAbsent
honors the contract of the method, and also replaces the old entry if
that mapped to null.
Closes gh-26868
This commit makes sure that LinkedCaseInsensitiveMap::putIfAbsent honors
the contract of the method, and also replaces the old entry if that
mapped to null.
Closes gh-26868
This commit fixes a potential memory leak, since PropertyComparator
previously kept an indirect reference to the value it last compared.
Closes gh-26869
This commit makes sure that any error handlers registered on the route
are also applied when an error occurs asynchronously. This commit
applies to asynchronous bodies with both CompletableFuture and Reactive
Streams, as well as completely asynchronous responses.
Closes gh-26831
Prior to this commit, MySQLMaxValueIncrementer could not be used when
the MySQL database was configured to use safe-updates mode.
See https://dev.mysql.com/doc/refman/8.0/en/mysql-tips.html#safe-updates
This commit introduces a `limit 1` clause to the generated update
statement to allow MySQLMaxValueIncrementer to be compatible with
MySQL safe-updates mode.
Closes gh-26858
Before this commit, HttpStatus::resolve used the values() method in its
logic. This causes a new array to be allocated for each invocation,
and results in memory overhead.
This commit makes a copy of the HttpStatus values array, and uses that
to resolve status codes.
Closes gh-26842
Prior to this commit, evaluating validation hints for
@javax.validation.Valid caused exceptions being raised when getting the
value of this annotation, which does not exist. Bypassing
AnnotationUtils.getValue() in those cases can improve performance by
avoiding the cost incurred by raising exceptions.
See gh-26787
Prior to this commit, two tests for exception handling regarding
@DateTimeFormat processing only passed on Java 8. This is due to the
fact that the toString() implementation for annotations changed in Java
9. Specifically, the representation for arrays changed from [] to {},
and strings are enclosed in double quotes beginning with Java 9.
This commit ensures that the affected @DateTimeFormat tests pass on
Java 9+, by making the assertions more lenient regarding toString()
output for annotations.
See gh-26777
See gh-26804
The support for fallback parsing patterns in @DateTimeFormat introduced
in gh-20292 introduced a regression in that the original cause of the
parsing exception was no longer retained.
gh-26777 addressed that regression for `java.time` support; whereas,
this commit addresses that regression for legacy Date types.
This commit ensures that the original ParseException is set as the
cause for any newly created ParseException, thereby retaining the
original exception as the root cause.
Closes gh-26804
The support for fallback parsing patterns in @DateTimeFormat introduced
in gh-20292 introduced a regression in that the original cause of the
parsing exception was no longer retained.
This commit ensures that the original DateTimeParseException is set as
the cause for any newly created DateTimeParseException, thereby
retaining the original exception as the root cause.
Closes gh-26777
Some operating systems delete temp files not just when booting up, but
also during operation. This commit makes sure that the
DefaultPartHttpMessageReader recreates the directory used to store
files in, if it's not there.
Closes gh-26790
This commit allows the spring-expression module to be more easily repackaged
for embedding in third-party JARs -- for example, via the Shadow Gradle plugin.
Closes gh-26779
This commit introduces support in both servlet and webflux for the
"Accept-Patch" header, which is sent when the client sends unsupported
data in PATCH requests.
See section 2.2 of RFC 5789.
Closes gh-26759
This commit introduces support in both servlet and webflux for the
"Accept-Patch" header in OPTIONS requests, as defined in section 3.1 of
RFC 5789.
See gh-26759
This commit adds support for Kotlin non-nullable type which resolves
to primitive Java types in BridgeMethodResolver#findBridgedMethod.
Closes gh-26585
Prior to this commit, if a test class annotated with @DirtiesContext
and @EnabledIf/@DisabledIf with `loadContext = true` was disabled due
to the evaluated SpEL expression, the ApplicationContext would not be
marked as dirty and closed.
The reason is that @EnabledIf/@DisabledIf are implemented via JUnit
Jupiter's ExecutionCondition extension API which results in the entire
test class (as well as any associated extension callbacks) being
skipped if the condition evaluates to `disabled`. This effectively
prevents any of Spring's TestExecutionListener APIs from being invoked.
Consequently, the DirtiesContextTestExecutionListener does not get a
chance to honor the class-level @DirtiesContext declaration.
This commit fixes this by implementing part of the logic of
DirtiesContextTestExecutionListener in
AbstractExpressionEvaluatingCondition (i.e., the base class for
@EnabledIf/@DisabledIf support). Specifically, if the test class for an
eagerly loaded ApplicationContext is disabled,
AbstractExpressionEvaluatingCondition will now mark the test
ApplicationContext as dirty if the test class is annotated with
@DirtiesContext.
Closes gh-26694
This commit fixes the missing pieces in our Maven Central publication
pipeline. Our first attempt at releasing with it showed a few problems:
* the promote task did not have the artifacts downladed with the
artifactory repository
* we applied the wrong Sonatype credentials to the task
* the github changelog task would fail because of docker rate limiting
since we were not using the right type of resource, which is
configured with the proper caching mechanism
See gh-26654
Prior to this commit, the Spring Framework build would rely on
setting a custom Java HOME for building all sources and tests
with that JDK.
This approach is not flexible enough, since we would be testing
the source compatibility against a recent JDK, but not a common
case experienced by the community: compiling and running
application code with a recent JDK and the official, JDK8-based
Framework artifacts.
This method is also limiting our choice of JDKs to the ones
currently supported by Gradle itself.
This commit introduces the support of Gradle JVM Toolchains in
the Spring Framework build.
We can now select a specific JDK for compiling the main
SourceSets (Java, Groovy and Kotlin) and another one for
compiling and running the test SourceSets:
`./gradlew check -PmainToolChain=8 -PtestToolchain=15`
Gradle will automatically find the JDKs present on the host or
download one automcatically. You can find out about the ones
installed on your host using:
`./gradlew -q javaToolchains`
Finally, this commit also refactors the CI infrastructure to:
* only have a single CI image (with all the supported JDKs)
* use this new feature to compile with JDK8 but test it
against JDK11 and JDK15.
Closes gh-25787
We now support Oracle's bind marker scheme that identifies dynamic
parameters using names that are prefixed with a colon such as
`:P0_myparam`.
Closes gh-26680
Prior to this commit, @DateTimeFormat only supported a single format
for parsing date time values via the style, iso, and pattern attributes.
This commit introduces a new fallbackPatterns attribute that can be
used to configure multiple fallback patterns for parsing date time
values. This allows applications to accept multiple input formats for
date time values.
For example, if you wish to use the ISO date format for parsing and
printing but allow for lenient parsing of user input for various
additional date formats, you could annotate a field or method parameter
with configuration similar to the following.
@DateTimeFormat(
iso = ISO.DATE,
fallbackPatterns = { "M/d/yy", "dd.MM.yyyy" }
)
Closes gh-20292
This commit skips the Bintray-related tasks in our CI pipeline and
instead relies on Maven Central for publishing Spring Framework
artifacts.
This commit also updates the CI pipeline to sign the artifacts directly
with the `artifactory-resource`.
Closes gh-26654
Previously we registered 3 AsyncListener's from the request, from the
response, and from the Servlet adapter.
After this change, only the Servlet adapter registers a listener and
the others are delegated to. This consolidates the handling of
AsyncListener events so that it's easier to discover, trace, and
enforce the order of handling.
See gh-26434
Prior to this commit, a method-level @CrossOrigin maxAge value did not
override a class-level @CrossOrigin maxAge value. This contradicts the
Javadoc for @CrossOrgin which states the following.
For those attributes where only a single value can be accepted such
as allowCredentials and maxAge, the local overrides the global
value.
This commit ensures that a method-level @CrossOrigin maxAge value
overrides a class-level @CrossOrigin maxAge value.
Closes gh-26619
Prior to this commit, `ServerHttpRequest.mutate()` would not reflect
changes made on the "Accept" and "Content-Type" HTTP headers.
This was due to the fact that the instantiation of a new request based
on the mutated values would not use the writable HTTP headers used
during the mutation, but rather a read-only view of the headers backed
by `ReadOnlyHttpHeaders`.
`ReadOnlyHttpHeaders` caches those values for performance reasons, so
getting those from the new request would not reflect the changes made
during the mutation phase.
This commit ensures that the new request uses the mutated headers.
Fixes gh-26615
This commit ensures handling is cancelled in case of onError/Timeout
callback from the Servlet container.
Separately we detect the same in ServletServerHttpRequest and
ServletServerHttpResponse, which signal onError to the read publisher
and cancel writing, but if the onError/Timeout arrives after reading
is done and before writing has started (e.g. longer handling), then
neither will reach handling.
See gh-26434, gh-26407
For setAsText, if the text argument is a file: URL for a path that does not exist, Paths.get(text) is called where text is a file: URL, which doesn't work - the result is an InvalidPathException.
To fix this issue, also check that the resource isn't a file before calling Paths.get(). That way, resources that are files skip to the other branch.
Class.getResource, ClassLoader.getResource, and ClassLoader.getSystemResource will throw IllegalArgumentException if a malformed URL is provided to them.
According to its javadoc, resolveURL should return null if not resolvable, so catch the IllegalArgumentException and return null.
Prior to this commit, the implementation of processKeyedProperty() in
AbstractNestablePropertyAccessor resulted in a
`java.lang.IllegalArgumentException: array element type mismatch` when
the property expression had more than one property key and the last key
should cause the array to grow automatically.
For example, given a property `int[][] multiArray` and property
expression `multiArray[1][3]`, the `processKeyedProperty()` method
created a new array object and assigned it to `multiArray`; whereas,
the new array object should have be assigned to `multiArray[1]`.
This commit fixes this issue.
Closes gh-26600
In order to reduce the focus on the deprecated @Required support, this
commit removes the RequiredAnnotationBeanPostProcessor section and
replaces it with a TIP and an updated NOTE.
See gh-26578
Since Spring Framework 5.2, the LoadTimeWeaver no longer weaves bean
classes annotated with @Component. This is a regression caused by the
changes in 40c62139ae, stemming from the fact that any class annotated
or meta-annotated with @Component is considered to be a candidate
configuration class in 'configuration lite' mode (i.e., a class without
the @Configuration annotation and without any @Bean methods) and
therefore now has its class eagerly loaded. This results in the class
being loaded before the LoadTimeWeaver has a chance to weave it.
This commit fixes this regression by explicitly avoiding eager class
loading for any 'lite' @Configuration or @Component class without @Bean
methods.
Closes gh-26199
Prior to this commit, `ResourceUrlProvider` would listen and consider
all `ContextRefreshedEvent` and use the given context to detect
`SimpleUrlHandlerMapping`.
This could lead to situations where a `ResourceUrlProvider` uses another
application context than its own (in a parent/child context setup) and
detect the wrong set of handlers.
Because `ResourceUrlProvider` locks itself once the auto-detection is
done, we need to ensure that it considers only events sent by its
application context.
Fixes gh-26561
Prior to this commit, MockHttpServletResponse only included the Expires
attribute in the generated Cookie header if the Max-Age attribute had
also been set.
This commit supports including the Expires attribute in the generated
Cookie Header even when the Max-Age attribute has not been set.
Closes gh-26558
Add factory methods to `AbstractEnvironment` that allow a custom
`ConfigurablePropertyResolver` and `MutablePropertySources` instance
to be used.
See gh-26462
With the introduction of the -H:+InlineBeforeAnalysis native image
compiler flag in GraalVM 21.0.0, it is now possible to use an utility method and get code
removal at build time.
This flag will be enabled as of Spring Native 0.9.0.
closes gh-25795
This commit updates the reference manual to point out that one may use
`.` instead of `$` as the nested class separator when providing a fully
qualified class name for a nested class in XML configuration.
This commit also updates the test for ClassUtils#forName to assert
support for `.` instead of `$`.
Closes gh-26540
gh-24281 introduced support to honor generic type information in
BeanUtils.copyProperties(), but that introduced a regression.
Specifically, if the supplied source or target object lacked generic
type information for the return type of the read-method or the
parameter type of the write-method for a given property, respectively,
the two properties would be considered a mismatch and ignored. This can
occur if the source or target object is a java.lang.reflect.Proxy since
the dynamically generated class for the proxy loses the generic type
information from interfaces that the proxy implements.
This commit fixes this regression by ignoring generic type information
if either the source or target property is lacking generic type
information.
Closes gh-26531
This commit better aligns how URI variable placeholders are detected
in UriComponentsBuilder#encode (i.e. the pre-encoding of the literal
parts of a URI template) and how they are expanded later on.
The latter relies on a pattern that stops at the first closing '}'
which excludes the possibility for well-formed, nested placeholders
other than variables with regex syntax, e.g. "{year:\d{1,4}}".
UriComponentsBuilder#encode now also stops at the first closing '}' and
further ensures the placeholder is not empty and that it has '{' before
deciding to treat it as a URI variable.
Closes gh-26466
This commit changes the condition in the if-block to check the number of
available processors instead of currently active threads with the hope
that doing so will prove more reliable on the CI server.
`spring-beans` ships a `YamlProcessor` that's used as a base class by
`YamlMapFactoryBean` and `YamlPropertiesFactoryBean`. These
implementations have a clear use case: mapping application-internal Yaml
documents for configuration or infrastructure purposes.
Since this use case rarely requires extended types support from the
underlying library, and since we're offering ways to list custom types
(since #25152), we'll restrict to java standard types only by default.
This simplifies the setup and focuses the abstract class on the core
use cases.
Closes gh-26530
This commit makes sure the StringDecoder supports stripping off
multi-line delimiters, such as \r\n. Specifically, we ensure that the
delimiter is stripped from the joined buffer.
Closes gh-26511
When a broker message handler is not configured with any prefixes, it will
process all messages by default, but user destination messages should be
pre-processed by the userDestinationMessageHandler first. This change
protects against that.
Closes gh-26474
This commit aligns the documentation in the reference manual with the
actual source code for StoredProcedure with regard to public execute()
methods.
Closes gh-26505
Previously this method returned headers only when a Content-Type part header
was present. Now it is guaranteed to return headers (possibly empty) as long
as there is a MultipartFile or Part with the given name.
Closes gh-26501
Prior to this commit, if an SQLException was thrown while retrieving
column metadata from the database, SimpleJdbcInsert would generate an
INSERT statement that was syntactically valid but missing columns,
which could lead to data silently missing in the database (for nullable
columns).
This commit fixes this by clearing all collected column metadata if an
SQLException is thrown while processing the metadata. The result is
that an InvalidDataAccessApiUsageException will be thrown later while
generating the INSERT statement. The exception message now contains an
additional hint to make use of SimpleJdbcInsert#usingColumns() in order
to ensure that all required columns are included in the generated
INSERT statement.
SimpleJdbcCall can also encounter an SQLException while retrieving
column metadata for a stored procedure/function, but an exception is
not thrown since a later invocation of the stored procedure/function
will likely fail anyway due to missing arguments. Consequently, this
commit only improves the warning level log message by including a hint
to make use of SimpleJdbcCall#addDeclaredParameter().
Closes gh-26486
Prior to this commit, calls to setLocale() MockHttpServletResponse
would result in a NullPointerException if the supplied Locale was null.
Although the Javadoc for setLocale(Locale) and addHeader(String, String)
in javax.servlet.ServletResponse does not specify how a null
Locale should be handled, both Tomcat and Jetty simply ignore a null
value.
This commit therefore updates MockHttpServletResponse to silently
ignore a null Locale passed to setLocale().
Closes gh-26493
Prior to this commit, calls to setHeader() and addHeader() in
MockHttpServletResponse would result in an IllegalArgumentException or
NullPointerException if the supplied header value was null.
Although the Javadoc for setHeader(String, String) and
addHeader(String, String) in javax.servlet.http.HttpServletResponse
does not specify how a null header value should be handled, both Tomcat
and Jetty simply ignore a null value. Furthermore,
org.springframework.http.HttpHeaders.add(String, String) declares the
headerValue parameter as @Nullable.
This commit therefore updates MockHttpServletResponse to silently
ignore null header values passed to setHeader() and addHeader().
Closes gh-26488
1. Update the HandlerMapping contract to state that CORS checks are expected
to be applied before returning a handler.
2. DispatcherHandler checks explicitly for pre-flight requests or CORS failed
requests and skips handling for both. Technically no change since
AbstractHandlerMapping already returns a NO_OP_HANDLER for those cases.
The purpose however is for the DispatcherHandler to also guarantee more
explicitly that no such handling can take place for such cases.
As one consequence, this makes it possible to invoke the DispatcherHandler from
anywhere in the WebFilter chain in order to "handle" a pre-flight request, and
then skip the rest of the WebFilter chain.
See gh-26257
Prior to this commit, if the DataSource in the
DataSourceFromTransactionManager was wrapped in a proxy implementing
InfrastructureProxy, SqlScriptsTestExecutionListener would throw an
exception stating that the DataSource in the ApplicationContext and the
DataSource in the DataSourceFromTransactionManager were not the same.
This commit unwraps both data sources and compares the underlying
target instances to check for equality.
In addition, this commit makes the unwrapResourceIfNecessary() method in
TransactionSynchronizationUtils public.
Closes gh-26422
This commit introduces warnings in invokeBeanFactoryPostProcessors()
and registerBeanPostProcessors() to deter people from submitting PRs
that result in breaking changes.
Closes gh-26401
Prior to this commit, `SimpleUrlHandlerMapping` and other
implementations of `AbstractUrlHandlerMapping` would not strip the
Servlet context path from the request path before performing path
matching with PathPattern instances.
This resulted in requests not matching as expected if the application
was configured with a Servlet context path.
This commit ensures that the `RequestPath` "path whithin the
application" is used for matching against path patterns.
Fixes gh-26411
This commit makes sure that the CronExpression rolls back the time to
midnight when dealing with Quartz expression fields (such as "L", "LW",
etc.).
Closes gh-26390
Remove support for open polymorphic serialization in
kotlinx.serialization web converters and codecs in order
to prevent serialization handling suitable for Jackson
or other general purpose Java JSON libraries.
This will probably need further refinements for collections
for example, and could ultimately be fixed when
kotlinx.serialization will provide a dedicated function to
evaluate upfront if a type can be serialized or not.
Closes gh-26298
This commit documents ApplicationContext initialization and shutdown
logging semantics for console output triggered in conjunction with the
Spring TestContext Framework.
Closes gh-25385
Prior to this commit, WebFlux native headers adapters would delegate the
`httpHeaders.keySet` to underlying implementations that do not honor the
`remove*` methods.
This commit fixes the `Set` implementation backing the
`httpHeaders.keySet` and ensures that headers can be safely removed from
the set.
Fixes gh-26361
Instead of using a new bounded elastic scheduler per
DefaultPartHttpMessageReader instance, which creates daemon threads that
are not shut down, we now use the shared bounded elastic scheduler.
Closes gh-26347
This commit only writes the 'charset' parameter in the written headers
if it is non-default (not UTF-8), since RFC7578 states that the only
allowed parameter is 'boundary'.
See gh-25885
Closes gh-26290
An empty buffer for RSocket is an empty message and while some codecs
such as StringDecoder may be able turn that into something such as an
empty String, for other formats such as JSON it is invalid input.
Closes gh-26344
Prior to this commit, the `ServletServerHttpResponse` would copy headers
from the `HttpHeaders` map and calls methods related to headers exposed
as properties (content-type, character encoding).
Unlike its reactive variant, this would not set the content length.
Depending on the Servlet container implementation, this could cause
duplicate Content-Length response headers in the actual HTTP response.
This commit aligns both implementations and ensures that the
`setContentLengthLong` method is called if necessary so that the Servlet
container can ensure a single header for that.
Fixes gh-26330
Prior to this commit, the `ResourceHttpRequestHandler` would write the
resource size to the "Content-Length" response header.
This is already done by the underlying `ResourceHttpMessageConverter`
and `ResourceRegionHttpMessageConverter`.
This commit avoid this duplicate operation and delegates instead to the
converters.
See gh-26330
Closes gh-26340
- Remove unused clone() code left-over from previous way of cloning.
- Lazy instantiation of ServerCodecConfigurer in
HttpWebHandlerAdapter since in most cases the configurer instance
is set externally.
Closes gh-26263
This commit reverts some changes done in 2d5f9723fa
in order to fix JdbcOperations.queryForObject and
JdbcOperations.queryForList.
It is not possible to provide a vararg variant in Kotlin
for now due to a signature clash, but that will probably
make sense in Spring Framework 6 timeframe along to array
based variant removal for both Java and Kotlin.
Closes gh-26312
Since support for the commandName attribute was removed from the
implementation of FormTag in Spring Framework 5.0, the presence of the
commandName attribute in the spring-form.tld file is no longer valid
and can lead one to assume that the commandName attribute is still
supported -- for example when using code completion in a JSP editor.
This commit therefore removes the obsolete commandName attribute in
spring-form.tld.
Closes gh-26337
This commit introduces tests that verify support for using
@PropertySource as a repeatable annotation without the
@PropertySources container, both locally on an @Configuration class
and on a custom composed annotation.
See gh-26329
This commit introduces a new feature in the Spring TestContext
Framework (TCF) that provides support for recording application events
published in the ApplicationContext so that assertions can be performed
against those events within tests. All events published during the
execution of a single test are made available via the ApplicationEvents
API which allows one to process the events as a java.util.Stream.
The following example demonstrates usage of this new feature.
@SpringJUnitConfig(/* ... */)
@RecordApplicationEvents
class OrderServiceTests {
@Autowired
OrderService orderService;
@Autowired
ApplicationEvents events;
@Test
void submitOrder() {
// Invoke method in OrderService that publishes an event
orderService.submitOrder(new Order(/* ... */));
// Verify that an OrderSubmitted event was published
int numEvents = events.stream(OrderSubmitted.class).count();
assertThat(numEvents).isEqualTo(1);
}
}
To enable the feature, a test class must be annotated or meta-annotated
with @RecordApplicationEvents. Behind the scenes, a new
ApplicationEventsTestExecutionListener manages the registration of
ApplicationEvents for the current thread at various points within the
test execution lifecycle and makes the current instance of
ApplicationEvents available to tests via an @Autowired field in the
test class. The latter is made possible by a custom ObjectFactory that
is registered as a "resolvable dependency". Thanks to the magic of
ObjectFactoryDelegatingInvocationHandler in the spring-beans module,
the ApplicationEvents instance injected into test classes is
effectively a scoped-proxy that always accesses the ApplicationEvents
managed for the current test.
The current ApplicationEvents instance is stored in a ThreadLocal
variable which is made available in the ApplicationEventsHolder.
Although this class is public, it is only intended for use within the
TCF or in the implementation of third-party extensions.
ApplicationEventsApplicationListener is responsible for listening to
all application events and recording them in the current
ApplicationEvents instance. A single
ApplicationEventsApplicationListener is registered with the test's
ApplicationContext by the ApplicationEventsTestExecutionListener.
The SpringExtension has also been updated to support parameters of type
ApplicationEvents via the JUnit Jupiter ParameterResolver extension
API. This allows JUnit Jupiter based tests to receive access to the
current ApplicationEvents via test and lifecycle method parameters as
an alternative to @Autowired fields in the test class.
Closes gh-25616
This new option allows a cancel signal to abort the request, which is
how we expect a connection to be aborted in a reactive chain that
involves the WebClient.
Closes gh-26287
This commit introduces computeAttribute() as an interface default method
in the AttributeAccessor API. This serves as a convenience analogous to
the computeIfAbsent() method in java.util.Map.
Closes gh-26281
Prior to this commit, the `NettyHeadersAdapter` would directly delegate
the `add()` and `set()` calls to the adapted
`io.netty.handler.codec.http.HttpHeaders`. This implementation rejects
`null` values with exceptions.
This commit aligns the behavior here with other implementations, by not
rejecting null values but simply ignoring them.
Fixes gh-26274
This commit makes sure that the matching pattern attributes is cleared
when an async result has been obtained, so that the subsequent
dispatch starts from scratch.
Closes gh-26239
This commit refines ConfigurationClassPostProcessor behavior in
native images by skipping configuration classes enhancement
instead of raising an error.
See spring-projects-experimental/spring-graalvm-native#248 for
more details.
Closes gh-26236
HttpMessageWriter implementations now attach the request log prefix
as a hint to created data buffers when the logger associated with
the writer is at DEBUG level.
Closes gh-26230
This commit updates websocket and messaging configurations in order
to not use CGLIB proxies anymore. The goal here is to allow support
in native executables and to increase the consistency across the
portfolio.
Closes gh-26227
The previous implementation uses ArrayList for storing resolved
resources and ArrayList has O(n) time complexity for the contains
operation. By switching to the HashSet for storing resolved
resources we improve the time complexity of this operation to be O(1).
See gh-25927
This commit improves the Javadoc for the `ForwardedHeaderFilter`
(Servlet Filter) and `ForwardedHeaderTransformer` (reactive variant) so
as to mention security considerations linked to Forwarded HTTP headers.
Closes gh-26081
Prior to this commit, the `SimpleApplicationEventMulticaster` would be
instrumented with the `ApplicationStartup` and start/stop events for
invoking event listeners (`spring.event.invoke-listener`).
This feature was already limited to single-threaded event publishers,
but is still flawed since several types of events can happen
concurrently. Due to the single-threaded nature of the startup sequence,
our implementation should not produce startup events concurrently.
This can cause issues like gh-26057, where concurrent events lead to
inconcistencies when tracking parent/child relationships.
This commit removes the `spring.event.invoke-listener` startup event as
a result.
Fixes gh-26057
This commit introduces AsyncServerResponse, an extension of
ServerResponse that is returned from ServerResponse.async and that
allows users to get the future response by calling the block method.
This is particularly useful for testing purposes.
This commit adds support for sending Server-Sent Events in WebMvc.fn,
through the ServerResponse.sse method that takes a SseBuilder DSL.
It also includes reference documentation.
Closes gh-25920
Remove the overriden pathVariable method from the nested request
wrapper,so that the merged attributes are used instead of the ones
provided by servlet.
Closes gh-26163
1. Revert changes in setHeader from 5.2.9 that caused regression on self-copy.
2. Update copyHeaders to ensure it still gets a copy of native headers.
3. Exit if source and target are the same instance, as an optimization.
Closes gh-26155
This commit introduces the following changes:
- Converters/codecs are now used based on generic type info.
- On WebMvc and WebFlux, kotlinx.serialization is enabled along
to Jackson because it only serializes Kotlin @Serializable classes
which is not enough for error or actuator endpoints in Boot as
described on spring-projects/spring-boot#24238.
TODO: leverage Kotlin/kotlinx.serialization#1164 when fixed.
Closes gh-26147
This commit only writes the 'charset' parameter in the written headers
if it is non-default (not UTF-8), since RFC7578 states that the only
allowed parameter is 'boundary'.
Closes gh-25885
Recently the Spring Framework projects could no longer be imported into
Eclipse IDE without compilation errors in JMH sources.
This commit addresses this issue by applying workarounds for bugs in
Gradle and the JMH plugin for Gradle.
Gradle bug: https://github.com/gradle/gradle/issues/14932
JMH plugin bug: https://github.com/melix/jmh-gradle-plugin/issues/157
The Gradle bug has already been fixed in Gradle 6.8 RC1; however, the
issue for the JMH plugin bug seems not to have been triaged yet.
Closes gh-26140
Despite the code duplication, we will not delegate to
AopUtils.invokeJoinpointUsingReflection() from
AbstractAspectJAdvice.invokeAdviceMethodWithGivenArgs().
The rationale is that the exception message in
invokeAdviceMethodWithGivenArgs() provides additional context via the
pointcut expression, and we would lose that additional context if we
simply delegate to AopUtils.invokeJoinpointUsingReflection(). We could
introduce an overloaded variant of invokeJoinpointUsingReflection() that
accepts an additional argument to provide the additional context for the
exception message, but we don't think that would be the best solution
for this particular use case.
In light of that, we are simply removing the TODO.
Closes gh-26126
Prior to this change the checks for isVariableName were duplicated
in 2 different locations. The logic has been moved to AspectJProxyUtils
to allow for re-use in those places and so that it benefits from any
optimizations that are done.
There are more locations which could benefit from not using a
toCharArray on a String, but rather use the charAt method from
the String itself. This to prevent an additional copy of the
char[] being created.
Prior to this commit, the promote task in the CI release pipeline would
write the "concourse-release-scripts" CONSOLE logs to /dev/null; this
commit ensures that we can read those while promoting artifacts.
gh-19930 introduced support for finding class-level test configuration
annotations on enclosing classes when using JUnit Jupiter @Nested test
classes, but support for @DynamicPropertySource methods got overlooked
since they are method-level annotations.
This commit addresses this shortcoming by introducing full support for
@NestedTestConfiguration semantics for @DynamicPropertySource methods
on enclosing classes.
Closes gh-26091
Prior to this commit, the test("test") conditions used in
AutowiredConfigurationErrorsIntegrationTests inadvertently asserted
that the invoked test methods reside in an org.springframework.test
subpackage, which is always the case for any test method in the
`spring-test` module. In other words, "test" is always a substring of
"org.springframework.test...", which is not a meaningful assertion.
This commit ensures that the JUnit Platform Test Kit is asserting the
actual names of test methods.
This commit introduces `and()` default methods in the MethodFilter and
FieldFilter functional interfaces in ReflectionUtils in order to simplify
uses cases that need to compose filter logic.
Closes gh-26063
Prior to this commit, a developer may have accidentally annotated a
JUnit Jupiter test method or lifecycle method with @Autowired, and that
would have potentially resulted in an exception that was hard to
understand. This is because the Spring container considers any
@Autowired method to be a "configuration method" when autowiring the
test class instance. Consequently, such an @Autowired method would be
invoked twice: once by Spring while attempting to autowire the test
instance and another time by JUnit Jupiter when invoking the test or
lifecycle method. The autowiring invocation of the method often leads
to an exception, either because Spring cannot satisfy a dependency (such
as JUnit Jupiter's TestInfo) or because the body of the method fails due
to test setup that has not yet been invoked.
This commit introduces validation for @Autowired test and lifecycle
methods in the SpringExtension that will throw an IllegalStateException
if any @Autowired method in a test class is also annotated with any of
the following JUnit Jupiter annotations.
- @Test
- @TestFactory
- @TestTemplate
- @RepeatedTest
- @ParameterizedTest
- @BeforeAll
- @AfterAll
- @BeforeEach
- @AfterEach
Closes gh-25966
The alternative is to use a filter but this makes it a little easier
and also guarantees that it will be downstream from all filters
regardless of their order, and therefore the Context will be visible
to all of them.
Closes gh-25710
In 5.3.x and forward, completely avoid logging unsent CONNECT messages
that are most likely authentication issues before the session is even
established.
Closes gh-26026
Adds a static INSTANCE to FullyQualifiedAnnotationBeanNameGenerator,
just like its parent class, AnnotationBeanNameGenerator, does.
The class doesn't have any state and overriding/hiding the INSTANCE of
the superclass, this prevents unintended use of a regular
AnnotationBeanNameGenerator through
FullyQualifiedAnnotationBeanNameGenerator.INSTANCE.
Prior to this commit, MergedAnnotationCollectors.toAnnotationSet()
created an intermediate ArrayList for storing the results prior to
creating a LinkedHashSet in the finishing step.
Since the creation of the intermediate list is unnecessary, this commit
simplifies the implementation of toAnnotationSet() by using the
Collector.of() factory method that does not accept a `finisher` argument.
The resulting Collector internally uses a `castingIdentity()` function
as the `finisher`.
Closes gh-26031
Prior to this commit, the findAllLocalMergedAnnotations() method in
AnnotationDescriptor altered between the use of TYPE_HIERARCHY and
TYPE_HIERARCHY_AND_ENCLOSING_CLASSES for the SearchStrategy, depending
on @NestedTestConfiguration semantics; however, when searching for
"local" annotations, there is no need to search the enclosing class
hierarchy since AnnotationDescriptor#next() handles that use case.
This commit therefore switches to using only the TYPE_HIERARCHY
strategy.
This commit also discontinues the use of
MergedAnnotationCollectors.toAnnotationSet() in order to avoid the
unnecessary creation of a temporary List when collecting synthesized
annotations in a LinkedHashSet.
Closes gh-25985
This commit configures the logging level to DEBUG for the concourse
release scripts tasks.
This is useful to get a clue on where those long-running tasks are at.
With this commit, bean definition profiles declared via @ActiveProfiles
are once again stored in registration order, in order to support use
cases in Spring Boot and other frameworks that depend on the
registration order.
This effectively reverts the changes made in conjunction with gh-25973.
Closes gh-26004
This commit makes copies of the default headers and cookies when a
WebClient is built, so that subsequent changes to these do not affect
previously built clients.
Closes: gh-25992
# <img src="src/docs/spring-framework.png" width="80" height="80"> Spring Framework [](https://ci.spring.io/teams/spring-framework/pipelines/spring-framework-5.3.x?groups=Build")
# <img src="src/docs/spring-framework.png" width="80" height="80"> Spring Framework [](https://ci.spring.io/teams/spring-framework/pipelines/spring-framework-5.3.x?groups=Build") [](https://ge.spring.io/scans?search.rootProjectNames=spring)
This is the home of the Spring Framework: the foundation for all [Spring projects](https://spring.io/projects). Collectively the Spring Framework and the family of Spring projects are often referred to simply as "Spring".
@@ -25,6 +25,10 @@ See the [Micro-Benchmarks](https://github.com/spring-projects/spring-framework/w
See the [Build from Source](https://github.com/spring-projects/spring-framework/wiki/Build-from-Source) Wiki page and the [CONTRIBUTING.md](CONTRIBUTING.md) file.
## Continuous Integration Builds
Information regarding CI builds can be found in the [Spring Framework Concourse pipeline](ci/README.adoc) documentation.
## Stay in Touch
Follow [@SpringCentral](https://twitter.com/springcentral), [@SpringFramework](https://twitter.com/springframework), and its [team members](https://twitter.com/springframework/lists/team/members) on Twitter. In-depth articles can be found at [The Spring Blog](https://spring.io/blog/), and releases are announced via our [news feed](https://spring.io/blog/category/news).
The Spring Framework is using https://concourse-ci.org/[Concourse] for its CI build and other automated tasks.
The Spring team has a dedicated Concourse instance available at https://ci.spring.io.
The Spring Framework uses https://concourse-ci.org/[Concourse] for its CI build and other automated tasks.
The Spring team has a dedicated Concourse instance available at https://ci.spring.io with a build pipeline
for https://ci.spring.io/teams/spring-framework/pipelines/spring-framework-5.3.x[Spring Framework 5.3.x].
=== Setting up your development environment
@@ -25,13 +26,17 @@ spring https://ci.spring.io spring-framework Wed, 25 Mar 20
----
=== Pipeline configuration and structure
The build pipelines are described in `pipeline.yml` file.
This file is listing Concourse resources, i.e. build inputs and outputs such as container images, artifact repositories, source repositories, notification services, etc.
It also describes jobs (a job is a sequence of inputs, tasks and outputs); jobs are organized by groups.
The `pipeline.yml` definition contains `((parameters))` which are loaded from the `parameters.yml` file or from our https://docs.cloudfoundry.org/credhub/[credhub instance].
You'll find in this folder the following resources:
* `pipeline.yml` the build pipeline
* `parameters.yml` the build parameters used for the pipeline
* `images/` holds the container images definitions used in this pipeline
@@ -41,6 +46,7 @@ You'll find in this folder the following resources:
=== Updating the build pipeline
Updating files on the repository is not enough to update the build pipeline, as changes need to be applied.
The pipeline can be deployed using the following command:
[source]
@@ -48,4 +54,4 @@ The pipeline can be deployed using the following command:
* Whether this environment lives within a native image.
* Exposed as a private static field rather than in a {@code NativeImageDetector.inNativeImage()} static method due to https://github.com/oracle/graal/issues/2594.
* Whether this environment lives within a native image.
* Exposed as a private static field rather than in a {@code NativeImageDetector.inNativeImage()} static method due to https://github.com/oracle/graal/issues/2594.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Spring Builds