Added a test case for #996

operator""_ replaced by operator""_t

README.md

@@ -5,9 +5,9 @@ cpp-httplib
 
 A C++11 single-file header-only cross platform HTTP/HTTPS library.
 
-It's extremely easy to setup. Just include **httplib.h** file in your code!
+It's extremely easy to setup. Just include the **httplib.h** file in your code!
 
-NOTE: This is a 'blocking' HTTP library. If you are looking for a 'non-blocking' library, this is not the one that you want.
+NOTE: This is a multi-threaded 'blocking' HTTP library. If you are looking for a 'non-blocking' library, this is not the one that you want.
 
 Simple examples
 ---------------
@@ -15,8 +15,15 @@ Simple examples
 #### Server
 
 ```c++
+#define CPPHTTPLIB_OPENSSL_SUPPORT
+#include "path/to/httplib.h"
+
+// HTTP
 httplib::Server svr;
 
+// HTTPS
+httplib::SSLServer svr;
+
 svr.Get("/hi", [](const httplib::Request &, httplib::Response &res) {
   res.set_content("Hello World!", "text/plain");
 });
@@ -27,12 +34,18 @@ svr.listen("0.0.0.0", 8080);
 #### Client
 
 ```c++
+#define CPPHTTPLIB_OPENSSL_SUPPORT
+#include "path/to/httplib.h"
+
+// HTTP
 httplib::Client cli("http://cpp-httplib-server.yhirose.repl.co");
 
-auto res = cli.Get("/hi");
+// HTTPS
+httplib::Client cli("https://cpp-httplib-server.yhirose.repl.co");
 
-res->status; // 200
-res->body;   // "Hello World!"
+auto res = cli.Get("/hi");
+res->status;
+res->body;
 ```
 
 ### Try out the examples on Repl.it!
@@ -40,6 +53,33 @@ res->body;   // "Hello World!"
 1. Run server at https://repl.it/@yhirose/cpp-httplib-server
 2. Run client at https://repl.it/@yhirose/cpp-httplib-client
 
+SSL Support
+-----------
+
+SSL support is available with `CPPHTTPLIB_OPENSSL_SUPPORT`. `libssl` and `libcrypto` should be linked.
+
+NOTE: cpp-httplib currently supports only version 1.1.1.
+
+```c++
+#define CPPHTTPLIB_OPENSSL_SUPPORT
+#include "path/to/httplib.h"
+
+// Server
+httplib::SSLServer svr("./cert.pem", "./key.pem");
+
+// Client
+httplib::Client cli("https://localhost:1234"); // scheme + host
+httplib::SSLClient cli("localhost:1234"); // host
+
+// Use your CA bundle
+cli.set_ca_cert_path("./ca-bundle.crt");
+
+// Disable cert verification
+cli.enable_server_certificate_verification(false);
+```
+
+Note: When using SSL, it seems impossible to avoid SIGPIPE in all cases, since on some operating systems, SIGPIPE can only be suppressed on a per-message basis, but there is no way to make the OpenSSL library do so for its internal communications. If your program needs to avoid being terminated on SIGPIPE, the only fully general way might be to set up a signal handler for SIGPIPE to handle or ignore it yourself.
+
 Server
 ------
 
@@ -120,24 +160,30 @@ svr.set_file_extension_and_mimetype_mapping("hh", "text/x-h");
 
 The followings are built-in mappings:
 
-| Extension |     MIME Type          |
-| :-------- | :--------------------- |
-| txt       | text/plain             |
-| html, htm | text/html              |
-| css       | text/css               |
-| jpeg, jpg | image/jpg              |
-| png       | image/png              |
-| gif       | image/gif              |
-| svg       | image/svg+xml          |
-| ico       | image/x-icon           |
-| json      | application/json       |
-| pdf       | application/pdf        |
-| js        | application/javascript |
-| wasm      | application/wasm       |
-| xml       | application/xml        |
-| xhtml     | application/xhtml+xml  |
+| Extension  |          MIME Type          | Extension  |          MIME Type          |
+| :--------- | :-------------------------- | :--------- | :-------------------------- |
+| css        | text/css                    | mpga       | audio/mpeg                  |
+| csv        | text/csv                    | weba       | audio/webm                  |
+| txt        | text/plain                  | wav        | audio/wave                  |
+| vtt        | text/vtt                    | otf        | font/otf                    |
+| html, htm  | text/html                   | ttf        | font/ttf                    |
+| apng       | image/apng                  | woff       | font/woff                   |
+| avif       | image/avif                  | woff2      | font/woff2                  |
+| bmp        | image/bmp                   | 7z         | application/x-7z-compressed |
+| gif        | image/gif                   | atom       | application/atom+xml        |
+| png        | image/png                   | pdf        | application/pdf             |
+| svg        | image/svg+xml               | mjs, js    | application/javascript      |
+| webp       | image/webp                  | json       | application/json            |
+| ico        | image/x-icon                | rss        | application/rss+xml         |
+| tif        | image/tiff                  | tar        | application/x-tar           |
+| tiff       | image/tiff                  | xhtml, xht | application/xhtml+xml       |
+| jpeg, jpg  | image/jpeg                  | xslt       | application/xslt+xml        |
+| mp4        | video/mp4                   | xml        | application/xml             |
+| mpeg       | video/mpeg                  | gz         | application/gzip            |
+| webm       | video/webm                  | zip        | application/zip             |
+| mp3        | audio/mp3                   | wasm       | application/wasm            |
 
-NOTE: These the static file server methods are not thread safe.
+NOTE: These static file server methods are not thread-safe.
 
 ### Logging
 
@@ -158,6 +204,39 @@ svr.set_error_handler([](const auto& req, auto& res) {
 });
 ```
 
+### Exception handler
+The exception handler gets called if a user routing handler throws an error.
+
+```cpp
+svr.set_exception_handler([](const auto& req, auto& res, std::exception &e) {
+  res.status = 500;
+  auto fmt = "<h1>Error 500</h1><p>%s</p>";
+  char buf[BUFSIZ];
+  snprintf(buf, sizeof(buf), fmt, e.what());
+  res.set_content(buf, "text/html");
+});
+```
+
+### Pre routing handler
+
+```cpp
+svr.set_pre_routing_handler([](const auto& req, auto& res) -> bool {
+  if (req.path == "/hello") {
+    res.set_content("world", "text/html");
+    return Server::HandlerResponse::Handled;
+  }
+  return Server::HandlerResponse::Unhandled;
+});
+```
+
+### Post routing handler
+
+```cpp
+svr.set_post_routing_handler([](const auto& req, auto& res) {
+  res.set_header("ADDITIONAL_HEADER", "value");
+});
+```
+
 ### 'multipart/form-data' POST data
 
 ```cpp
@@ -171,7 +250,7 @@ svr.Post("/multipart", [&](const auto& req, auto& res) {
 });
 ```
 
-### Receive content with Content receiver
+### Receive content with a content receiver
 
 ```cpp
 svr.Post("/content_receiver",
@@ -198,7 +277,7 @@ svr.Post("/content_receiver",
   });
 ```
 
-### Send content with Content provider
+### Send content with the content provider
 
 ```cpp
 const size_t DATA_CHUNK_SIZE = 4;
@@ -214,7 +293,7 @@ svr.Get("/stream", [&](const Request &req, Response &res) {
       sink.write(&d[offset], std::min(length, DATA_CHUNK_SIZE));
       return true; // return 'false' if you want to cancel the process.
     },
-    [data] { delete data; });
+    [data](bool success) { delete data; });
 });
 ```
 
@@ -242,6 +321,7 @@ svr.Get("/stream", [&](const Request &req, Response &res) {
 ```cpp
 svr.Get("/chunked", [&](const Request& req, Response& res) {
   res.set_chunked_content_provider(
+    "text/plain",
     [](size_t offset, DataSink &sink) {
       sink.write("123", 3);
       sink.write("345", 3);
@@ -255,7 +335,7 @@ svr.Get("/chunked", [&](const Request& req, Response& res) {
 
 ### 'Expect: 100-continue' handler
 
-As default, the server sends `100 Continue` response for `Expect: 100-continue` header.
+By default, the server sends a `100 Continue` response for an `Expect: 100-continue` header.
 
 ```cpp
 // Send a '417 Expectation Failed' response.
@@ -286,7 +366,7 @@ svr.set_write_timeout(5, 0); // 5 seconds
 svr.set_idle_interval(0, 100000); // 100 milliseconds
 ```
 
-### Set maximum payload length for reading request body
+### Set maximum payload length for reading a request body
 
 ```c++
 svr.set_payload_max_length(1024 * 1024 * 512); // 512MB
@@ -364,6 +444,7 @@ httplib::Client cli("localhost:8080");
 httplib::Client cli("http://localhost");
 httplib::Client cli("http://localhost:8080");
 httplib::Client cli("https://localhost");
+httplib::SSLClient cli("localhost");
 ```
 
 ### Error code
@@ -471,7 +552,7 @@ cli.set_read_timeout(5, 0); // 5 seconds
 cli.set_write_timeout(5, 0); // 5 seconds
 ```
 
-### Receive content with Content receiver
+### Receive content with a content receiver
 
 ```c++
 std::string body;
@@ -498,7 +579,7 @@ auto res = cli.Get(
   });
 ```
 
-### Send content with Content provider
+### Send content with a content provider
 
 ```cpp
 std::string body = ...;
@@ -621,7 +702,7 @@ res = cli.Get("/");
 res->status; // 200
 ```
 
-### Use a specitic network interface
+### Use a specific network interface
 
 NOTE: This feature is not available on Windows, yet.
 
@@ -629,33 +710,10 @@ NOTE: This feature is not available on Windows, yet.
 cli.set_interface("eth0"); // Interface name, IP address or host name
 ```
 
-OpenSSL Support
----------------
-
-SSL support is available with `CPPHTTPLIB_OPENSSL_SUPPORT`. `libssl` and `libcrypto` should be linked.
-
-NOTE: cpp-httplib currently supports only version 1.1.1.
-
-```c++
-#define CPPHTTPLIB_OPENSSL_SUPPORT
-
-httplib::SSLServer svr("./cert.pem", "./key.pem");
-
-httplib::SSLClient cli("localhost", 1234); // or `httplib::Client cli("https://localhost:1234");`
-cli.set_ca_cert_path("./ca-bundle.crt");
-cli.enable_server_certificate_verification(true);
-```
-
-Note: When using SSL, it seems impossible to avoid SIGPIPE in all cases, since on some operating systems, SIGPIPE
-can only be suppressed on a per-message basis, but there is no way to make the OpenSSL library do so for its
-internal communications. If your program needs to avoid being terminated on SIGPIPE, the only fully general way might
-be to set up a signal handler for SIGPIPE to handle or ignore it yourself.
-
-
 Compression
 -----------
 
-The server can applie compression to the following MIME type contents:
+The server can apply compression to the following MIME type contents:
 
   * all text types except text/event-stream
   * image/svg+xml
@@ -719,12 +777,12 @@ Include `httplib.h` before `Windows.h` or include `Windows.h` by defining `WIN32
 #include <httplib.h>
 ```
 
-Note: Cygwin on Windows is not supported.
+Note: Windows 8 or lower and Cygwin on Windows are not supported.
 
 License
 -------
 
-MIT license (© 2020 Yuji Hirose)
+MIT license (© 2021 Yuji Hirose)
 
 Special Thanks To
 -----------------

example/ssesvr.cc

@@ -1,10 +1,3 @@
-//
-//  sse.cc
-//
-//  Copyright (c) 2020 Yuji Hirose. All rights reserved.
-//  MIT License
-//
-
 #include <atomic>
 #include <chrono>
 #include <condition_variable>
@@ -20,8 +13,6 @@ using namespace std;
 class EventDispatcher {
 public:
   EventDispatcher() {
-    id_ = 0;
-    cid_ = -1;
   }
 
   void wait_event(DataSink *sink) {
@@ -41,8 +32,8 @@ public:
 private:
   mutex m_;
   condition_variable cv_;
-  atomic_int id_;
-  atomic_int cid_;
+  atomic_int id_{0};
+  atomic_int cid_{-1};
   string message_;
 };
 

meson.build

@@ -0,0 +1,7 @@
+project('cpp-httplib', 'cpp', license: 'MIT')
+
+cpp_httplib_dep = declare_dependency(include_directories: include_directories('.'))
+
+if meson.version().version_compare('>=0.54.0')
+  meson.override_dependency('cpp-httplib', cpp_httplib_dep)
+endif

test/test_proxy.cc

@@ -8,29 +8,29 @@ using namespace httplib;
 template <typename T>
 void ProxyTest(T& cli, bool basic) {
   cli.set_proxy("localhost", basic ? 3128 : 3129);
-  auto res = cli.Get("/get");
+  auto res = cli.Get("/httpbin/get");
   ASSERT_TRUE(res != nullptr);
   EXPECT_EQ(407, res->status);
 }
 
 TEST(ProxyTest, NoSSLBasic) {
-  Client cli("httpbin.org");
+  Client cli("nghttp2.org");
   ProxyTest(cli, true);
 }
 
 #ifdef CPPHTTPLIB_OPENSSL_SUPPORT
 TEST(ProxyTest, SSLBasic) {
-  SSLClient cli("httpbin.org");
+  SSLClient cli("nghttp2.org");
   ProxyTest(cli, true);
 }
 
 TEST(ProxyTest, NoSSLDigest) {
-  Client cli("httpbin.org");
+  Client cli("nghttp2.org");
   ProxyTest(cli, false);
 }
 
 TEST(ProxyTest, SSLDigest) {
-  SSLClient cli("httpbin.org");
+  SSLClient cli("nghttp2.org");
   ProxyTest(cli, false);
 }
 #endif
@@ -54,29 +54,27 @@ void RedirectProxyText(T& cli, const char *path, bool basic) {
   EXPECT_EQ(200, res->status);
 }
 
-#if 0
 TEST(RedirectTest, HTTPBinNoSSLBasic) {
-  Client cli("httpbin.org");
-  RedirectProxyText(cli, "/redirect/2", true);
+  Client cli("nghttp2.org");
+  RedirectProxyText(cli, "/httpbin/redirect/2", true);
 }
 
 #ifdef CPPHTTPLIB_OPENSSL_SUPPORT
 TEST(RedirectTest, HTTPBinNoSSLDigest) {
-  Client cli("httpbin.org");
-  RedirectProxyText(cli, "/redirect/2", false);
+  Client cli("nghttp2.org");
+  RedirectProxyText(cli, "/httpbin/redirect/2", false);
 }
 
 TEST(RedirectTest, HTTPBinSSLBasic) {
-  SSLClient cli("httpbin.org");
-  RedirectProxyText(cli, "/redirect/2", true);
+  SSLClient cli("nghttp2.org");
+  RedirectProxyText(cli, "/httpbin/redirect/2", true);
 }
 
 TEST(RedirectTest, HTTPBinSSLDigest) {
-  SSLClient cli("httpbin.org");
-  RedirectProxyText(cli, "/redirect/2", false);
+  SSLClient cli("nghttp2.org");
+  RedirectProxyText(cli, "/httpbin/redirect/2", false);
 }
 #endif
-#endif
 
 #ifdef CPPHTTPLIB_OPENSSL_SUPPORT
 TEST(RedirectTest, YouTubeNoSSLBasic) {
@@ -218,7 +216,8 @@ TEST(DigestAuthTest, NoSSL) {
 
 // ----------------------------------------------------------------------------
 
-void KeepAliveTest(Client& cli, bool basic) {
+template <typename T>
+void KeepAliveTest(T& cli, bool basic) {
   cli.set_proxy("localhost", basic ? 3128 : 3129);
   if (basic) {
     cli.set_proxy_basic_auth("hello", "world");
@@ -234,20 +233,20 @@ void KeepAliveTest(Client& cli, bool basic) {
 #endif
 
   {
-    auto res = cli.Get("/get");
+    auto res = cli.Get("/httpbin/get");
     EXPECT_EQ(200, res->status);
   }
   {
-    auto res = cli.Get("/redirect/2");
+    auto res = cli.Get("/httpbin/redirect/2");
     EXPECT_EQ(200, res->status);
   }
 
   {
     std::vector<std::string> paths = {
-        "/digest-auth/auth/hello/world/MD5",
-        "/digest-auth/auth/hello/world/SHA-256",
-        "/digest-auth/auth/hello/world/SHA-512",
-        "/digest-auth/auth-int/hello/world/MD5",
+        "/httpbin/digest-auth/auth/hello/world/MD5",
+        "/httpbin/digest-auth/auth/hello/world/SHA-256",
+        "/httpbin/digest-auth/auth/hello/world/SHA-512",
+        "/httpbin/digest-auth/auth-int/hello/world/MD5",
     };
 
     for (auto path: paths) {
@@ -258,34 +257,32 @@ void KeepAliveTest(Client& cli, bool basic) {
   }
 
   {
-    int count = 100;
+    int count = 10;
     while (count--) {
-      auto res = cli.Get("/get");
+      auto res = cli.Get("/httpbin/get");
       EXPECT_EQ(200, res->status);
     }
   }
 }
 
-#if 0
 #ifdef CPPHTTPLIB_OPENSSL_SUPPORT
 TEST(KeepAliveTest, NoSSLWithBasic) {
-  Client cli("httpbin.org");
+  Client cli("nghttp2.org");
   KeepAliveTest(cli, true);
 }
 
 TEST(KeepAliveTest, SSLWithBasic) {
-  SSLClient cli("httpbin.org");
+  SSLClient cli("nghttp2.org");
   KeepAliveTest(cli, true);
 }
 
 TEST(KeepAliveTest, NoSSLWithDigest) {
-  Client cli("httpbin.org");
+  Client cli("nghttp2.org");
   KeepAliveTest(cli, false);
 }
 
 TEST(KeepAliveTest, SSLWithDigest) {
-  SSLClient cli("httpbin.org");
+  SSLClient cli("nghttp2.org");
   KeepAliveTest(cli, false);
 }
 #endif
-#endif